Abstract:In this article, a novel implementation method for 3-D bandstop frequency-selective structures (FSSs) with ultra large angular stability is presented, utilizing narrow L-shaped strip lines (NLSLs). The resonator comprises NLSLs printed on both sides of a printed circuit board, symmetrically rotating with respect to each other. The structures designed based on the NLSLs resonator offer significant advantages, including large angular stability of the ultrawide stopband for dual polarizations, as well as low-passband insertion loss (IL).To illustrate the working principle, a miniaturized design example and its corresponding equivalent circuit model were developed, with a size of 0.13 lambda(0 )x 0.13 lambda(0 )x 0.25 lambda(0). The angular stability of the described bandstop structure can reach up to 70(degrees) fordual polarizations. Two samples were fabricated and measured. The measurement results reveal that the miniaturized NLSLs-based structure can provide an ultrawide stopband, with its -10-dB fractional bandwidth (FBW) of up to 53%. Furthermore, an FSS sample encompassing an ultrawide stopband from 4 to12 GHz was readily implemented using our method, exhibiting exceptional angular stability. In conclusion, our proposed method fills the gap of the existing dual-polarized bandstop FSSs to obtain a large-10-dB FBW of more than 26.2% and could be a good guidance for designing the future microwave FSS radome and shielding structures.

Ultra-deep Stopband Induced by Spontaneous-Emission-cancellation–like Interference Between Two Side-Coupled Zero-Index-metamaterial–based Resonators

Ultrathin and Simple 3-D Rasorber Based on Ferrites with Embedded Epsilon-Near-Zero Waveguides

An electromagnetic modulator based on electrically controllable meta-molecule analogue to spontaneous emission cancellation

A Novel Miniaturized Strong-Coupled FSS Structure with Excellent Angular Stability

Ultra-compact modulator based on Epsilon-Near-Zero metamaterial

Ultralow Scattering and Broadband Metasurface Using Phase Adjustable FSS Elements Embedded With Lumped Resistors

A Micromachined Ultra‐wide Stopband Lowpass Filter Based on Stepped Impedance Resonator Loaded T‐shaped Structure

Terahertz Narrow Bandstop, Broad Bandpass Filter Using Double-Layer S-shaped Metamaterials

Miniaturized Bandpass Filter with High Selectivity and Wide Stopband Using Dual-Layer Structure

Miniaturized Half-Mode T-Septum SIW Bandpass Filter With an Ultrawide Stopband

A Wide-Stopband Microstrip Bandpass Filter Using Mixed Electric and Magnetic Coupled Resonators

A Wide Stopband Wideband HTS Filter Using Stepped-Impedance Resonators With an Interdigital Capacitor Structure

Ultra-Wide Stopband Low-Pass Filter Using Multiple Transmission Zeros

Realization of a Wide Stopband Filter Using the Weakest Electric Field Method and Electromagnetic Hybrid Coupling Method

Band-Stop Filter Based on Metal-Insulator-Metal Waveguide with Asymmetric Circular Resonant Cavities

Integrated super-couplers based on zero-index metamaterials

Miniaturized Single Band Filter with Wide Outer-band Rejection at Higher Frequencies

Miniaturized Bandpass Filter with Mixed Electric and Magnetic Coupling Using Hexagonal Stepped Impedance Resonators

A semi-active metamaterial beam with electromagnetic quasi-zero-stiffness resonators for ultralow-frequency band gap tuning

Implementation of 3-D Bandstop Frequency-Selective Structures with Ultralarge Angular Stability Utilizing Narrow L-Shaped Strip Lines

Miniaturized tri-notched wideband bandpass filter with ultrawide upper stopband suppression