Abstract:The acoustic response of a five-bladed rotor to an axisymmetric turbulent boundary layer at the tail end of a body of revolution (BOR) is investigated numerically to elucidate the physical sources of acoustics, particularly the role of coherent structures in sound generation. The BOR is at a length-based Reynolds number of and free-stream Mach number of 0.059. Two rotor advance ratios, and , are considered. The turbulent boundary layer on the nose and midsection of the BOR is computed using wall-modelled large-eddy simulation, whereas that in the acoustically important tail-cone section is wall-resolved. The radiated acoustic field is calculated using the Ffowcs Williams–Hawkings equation. The computed flow statistics and sound pressure spectra agree well with the experimental measurements at Virginia Tech. In addition to broadband turbulence-ingestion noise, spectral humps near multiples of the blade-passing frequency and accompanying valleys are captured. They are shown to be caused by correlated blade unsteady-loading dipole sources and their constructive and destructive interference as a result of successive blades cutting through the same coherent structures. The latter undergo rapid growth in the decelerating tail-cone boundary layer before their interaction with the rotor. The acoustic radiation is dominated by the outer region of the blade owing to a combination of larger blade chord-length, inflow turbulence intensity and blade speed. The numerical results also correctly predict the effect of the rotor advance ratio on the acoustic field. A mixed free-stream/convection Mach-number scaling successfully collapses the sound pressure spectra at the two advance ratios.

Computational Fluid Dynamics Simulation of Sound Propagation Through a Blade Row.

Numerical Simulation of Nonlinear Phenomena in a Standing-Wave Thermoacoustic Engine with Gas-Liquid Coupling Oscillation

Analysis of Blade Noise with Different Root Boundary Conditions Considering Fluid-Structure Interaction Effect

Numerical study of the hydrodynamic performances of surface piercing propeller

Efficient Computation of Spinning Modal Radiation Through an Engine Bypass Duct

Numerical Analysis of Aerodynamic Noise Radiated from Cross Flow Fan

Numerical Analysis of Supersonic Flows over an Aft-Ramped Open-Mode Cavity

Numerical study of acoustic radiation due to a supersonic turbulent boundary layer

Numerical Prediction of Sound Generated from Flows with a Low Mach Number

Investigations of Flow Field with Different Turbulence Models on NREL Phase VI Blade

Experimental and Computational Studies of Vortex Shedding and Aerodynamic Sound for Flow over a Square Cylinder Near a Rigid Wall.

Theoretical Study of Sound Propagation in Lined Duct with Rigid Splices Using Wiener-Hopf Method

Numerical Simulations of Morphology, Flow Structures and Forces for a Sonic Jet Exhausting in Supersonic Crossflow

Numerical simulation of the cavitating noise of contra-rotating propellers based on detached eddy simulation and the Ffowcs Williams–Hawkings acoustics equation

Numerical simulation of unsteady incompressible flow field

Numerical simulation of jet flow flied and its radiated acoustic field

Sound Radiation from a Bypass Duct with Bifurcations

Assessment of Turbulence Models for Cylinder Flow Aeroacoustics

Research on Computational Method of Supersonic Inlet/Isolator Internal Flow

Rotor aeroacoustic response to an axisymmetric turbulent boundary layer

Theoretical Study and Numerical Validation of Sound Radiation from Coaxial Annular Duct