Abstract:Previous research results show that, at the top of the distillation column of the liquefied process of oxygen-bearing coal-bed methane (CBM), an explosion hazard may happen. The minimum ignition energy (MIE) of combustible gas reflects the sensitivity of the explosion. Although MIE has been experimentally and theoretically studied at normal or elevated temperatures, there are no relevant data aimed at the environment (low temperature and high pressure) which exists at the top of the distillation column. Therefore, in this study, the MIE of a methane-air mixture was tested using a low temperature experimental vessel in the low temperature (123-273 K) and pressure (0.1-0.9 MPa) ranges. Our research results show that MIE increases with the decrease in initial pressure P-0 or temperature T-0. When the initial pressure is relatively low, both the initial pressure and temperature significantly affect the MIE. However, at higher initial pressure, the initial temperature and pressure have relatively smaller impact on MIE. The MIE linearly correlates to 1/P-0(2), whereas it linearly correlates to 1/T-0. With the decrease in initial temperature, the degree of the impact of initial pressure on MIE gets larger. Additionally, with the increase in initial pressure, the degree of the impact of initial temperature on MIE gets smaller. The changing rule of our experimental MIE with initial temperature and pressure shows good accordance with published results. The energy generated by the human body, collision between the metals, lightning, and external fire is higher than the MIE of methane at the top of the distillation column, which indicates that an explosion hazard may happen. Thus, corresponding safety measures should be taken.

Theoretical model of minimum ignition energy prediction for methane-air mixture

Theoretical prediction model for minimum ignition energy of combustible gas mixtures

Experimental study of minimum ignition energy of methane/air mixtures at elevated temperatures and pressures

A statistical model to predict ignition probability

Effects of spark duration on minimum ignition energy for methane/air mixture

Minimum ignition energy of n-heptane/air mixtures and its affecting factors

Ignition characteristics for methane-air mixtures atvarious initial temperatures

Experimental Study of Minimum Ignition Energy of Methane–Air Mixtures at Low Temperatures and Elevated Pressures

Prediction of Minimum Ignition Energy from Molecular Structure Using Quantitative Structure–Property Relationship (QSPR) Models

The Discussion of Ignition Criterion About the Mechanical Spark Ignition of Near-Limit Methane-Air Mixtures

EXPERIMENTAL STUDY ON THE IGNITION TEMPERATURE OF HYDROGEN-CARBON MONOXIDE-METHANE-CARBON DIOXIDE MIXTURES

Minimum Ignition Energy of Methanol-Air Mixtures

Experimental study on the minimum ignition energy of methane at low temperature

Fast Prediction of Minimum Ignition Energy from Molecular Structure Using Simple QSPR Model

Experimental and Modeling Study of the High‐Temperature Ignition of Methane and Methane Mixtures with Ethane and Propane

Mathematical Model for Minimum Ignition Energy of Dust Clouds

Ignition Thresholds and Flame Propagation of Methane/Air Mixtures Ignited Via Radiatively Heated Inert Particles

Experimental Study and Mechanism Model on the Ignition Sensitivity of Typical Organic Dust Clouds in O2/N2, O2/Ar and O2/CO2 Atmospheres.

Minimum Ignition Energy and Coupling Coefficient of Methane-Air Mixture and Its Application

Study on the explosion characteristics of Methane/Air mixture using simplified chemical kinetics

Influence of Vapor–Liquid Two-Phase N-Hexane/air Mixtures on Flammability Limit and Minimum Ignition Energy