The Construction of A 9-Pole Prototype for Srrc U-10 Undulator
CH Chang,LH Chang,HH Chen,TC Fan,CS Hwang,DN Guo,JY Hsu,FY Lin,TF Lin,C Wang,ST Yeh,GJ Hwang,PK Tseng
DOI: https://doi.org/10.1109/20.511413
IF: 1.848
1996-01-01
IEEE Transactions on Magnetics
Abstract:A 9-pole undulator prototype with a magnetic period length of 10 cm was designed and constructed to examine the mechanical and magnetic field performance. The hybrid permanent magnet structure was optimized by using 2D ''PANDIRA'' and 3D ''TOSCA'' magnetostatic codes. A half period magnet model was also fabricated to verify the magnetic Period length field strength on-axis and the transverse field roll-off within 0.1 % in the good field region of +/- 10 mm at a minimum gap of 22 mm. The end pole configurations, as equipped with either two tunable permanent magnetic rotators or steering coil correctors were designed for minimizing the deviation of the magnetic field strength integrals. The magnet structures were mounted bn a 2 meter long C-frame support structure in which the gap could be moved in parallel and phase motion. The field characteristics, and measurement results between the adjustable gap undulator (AGO) and the hybrid adjustable phase undulator (APU) were also presented.