Abstract:On the basis of previous experimental studies of two-phase flow condensation heat transfer for R134a inside the horizontal micro-fin tubes, a theoretically analysis of heat transfer characteristic combining both heat transfer mechanism and flow mechanism is discussed by the experimental data of heat transfer coefficient and pressure drop, to further clarify the influence of experimental condition and tube structure on heat transfer characteristics under the special working condition. Two performance factors, enhancement factor (EF) and penalty factor (PF), are introduced to quantitatively compare the effect of micro-fin on the heat transfer coefficient and the pressure drop between enhance tube and smooth tube. Meanwhile, the comprehensive factor, CHF, is applied to evaluate the comprehensive performance of heat transfer tube. It was found that enhancement factor (EF) and penalty factor (PF) both increase with increasing mass flux and fin helical angle, and decreasing saturation temperature, the comprehensive factor, CHF, is always greater than one and increases with increasing fin helical angle and mass flux, and decreasing saturation temperature. Moreover, based on the comparative analysis findings that some existing correlations of heat transfer characteristics underestimate most of the experimental data, and the experimental variable has great influences on the correlation prediction accuracy, such as mass flux, which is proportionate to the prediction deviation of correlation. Therefore, a new correlation was developed through analyzing quantitatively influencing mechanism of the experimental variable on the heat transfer characteristics, in a way that a two-phase frictional multiplier is defined firstly from the experimental data and then the forced convection heat transfer mechanism is redefined based on the comprehensive effect of various experimental variables. By the experimental data verification, the new correlation shows good prediction effect with the mean deviation of less than 5%.

Determination of the Operation Range of a Vertical Two-Phase Closed Thermosyphon

Investigation on the effect of filling ratio on the steady-state heat transfer performance of a vertical two-phase closed thermosyphon

Performance Analysis of a Separator Assisted Two-Phase Thermosyphon Based on an Experimentally Validated Model

Theoretical and experimental investigation on heat transfer characteristics in a cryogenic two-phase closed thermosyphon

Analysis on distribution of liquid and vapor phase and heat transfer capacity in evaporator of a two-phase closed thermosyphon

Numerical study of Two-Phase flow behavior during dryout in a Two-Phase closed thermosyphon under thermal boundary conditions

CFD simulation on the operation characteristics of CO 2 two-phase thermosyphon loop

Operation characteristics and limitations of small-diameter two-phase closed thermosyphon

Modeling and performance analysis of a two-phase thermosyphon loop with partially/fully liquid-filled downcomer

Numerical Investigation of the Two-Phase Closed Thermosyphon Operating with Non-Uniform Heat Flux Profiles

An Experimental Study Of Thermal Performance Of A Two-Phase Loop Thermosyphon (Tplt)-Based Steam Generator: Effects Of Thermal Boundary Conditions

Experimental study on the passive regulation of a CO2 two-phase thermosyphon loop

Experimental study on the effect of filling ratio on an R141b two-phase thermosyphon loop with a horizontal parallel tube evaporator

Research on the Refrigerant Column Height in the Downcomer of a Two-Phase Loop Thermosyphon

Research on the Refrigerant Distribution and Distinctive Flow Phenomena in a Two-Phase Loop Thermosyphon Through a Holistic Visualization Method

Experimental Investigation on Heat Transfer in Two-Phase Closed Thermosyphon Containing Non-Condensable Gas

Visualized Investigation of Gas–liquid Stratified Flow Boiling of Water in a Natural Circulation Thermosyphon Loop with Horizontal Arranged Evaporator

Theoretical and Experimental Analyses of Two-Phase Flow Condensation Heat Transfer Inside the Horizontal Micro-Fin Tube

Numerical investigation of surface wettability effect on two-phase closed thermosyphon

Experimental and theoretical analysis of a closed loop two-phase thermosiphon under various states for latent heat storage

Investigation of the thermal response characteristics of the loop thermosyphon under convective boundary conditions