Abstract:The two-phase thermosyphon loop (TPTL), which has an excellent heat transfer performance with simple, compact structure and pump-free advantages, can effectively solve the heat transfer problem under high heat flux. It is necessary to optimize the TPTL to operate in good conditions, especially the state of the downcomer in which the liquid head is one of the critical parameters to determine the driving force of the circulation. However, in the existing studies, the flow features under high filling ratio and high heat flux were ignored in the downcomer. Since a high filling ratio has been proved to have good performance at high heat flux. Herein, the flow characteristics of the TPTL downcomer were seen and quantified using an experimental visual setup under different filling ratios in this study. Two flow features under high heat flux, for the first time, are reported: 1. two-phase flow in the downcomer at high filling ratios. 2. liquid column height oscillation under a partially liquid-filled state. According to the results, the filling ratio significantly impacts the flow characteristics of the downcomer. The TPTL downcomer state, contrary to the traditional understanding, can be partially filled with liquid but not totally filled with fluid all the time, implying that the driving force may be less than the typical assumption. TPTL with a high filling ratio can also provide a maximum gravity pressure head driving force due to the full downcomer. In addition, the bubble pump, which influences by the heat flux, also accelerates the mass flow in the TPTL. Consequently, TPTLs with a high filling ratio showed a significant thermal performance. A partially filled with the liquid phenomenon is demonstrated in moderate filling ratios, and the height of the liquid column will change as the heat flux increases, which indicates the self-regulation of TPTL. When the filling ratio is low, the liquid column height is greatly influenced by the filling ratio. The high liquid column will also give the TPTL excellent thermal performance. The ideal state of a TPTL downcomer is the downcomer filled with two-phase liquid under a high void fraction, which is realized by a high filling ratio TPTL. This paper sheds some light on the downcomer state of TPTLs to optimize the TPTL thermal performance.

Modeling and performance analysis of a two-phase thermosyphon loop with partially/fully liquid-filled downcomer

Performance Analysis of a Separator Assisted Two-Phase Thermosyphon Based on an Experimentally Validated Model

Experimental Investigation on Two-Phase Thermosyphon Loop with Partially Liquid-Filled Downcomer

Development of transient thermal-hydraulic analysis model for the two-phase loop thermosyphon

Visualized-experimental assessment on a two-phase thermosyphon loop downcomer state with wide range of filling ratios

Numerical Investigation of Heat Transfer Characteristics in a Shell- And-Tube Latent Heat Thermal Energy Storage System

Research on the Refrigerant Column Height in the Downcomer of a Two-Phase Loop Thermosyphon

Research on the Refrigerant Distribution and Distinctive Flow Phenomena in a Two-Phase Loop Thermosyphon Through a Holistic Visualization Method

Numerical simulation on the heat transfer characteristics of two-phase loop thermosyphon with high filling ratios

A Performance Evaluation Index for Two-Phase Thermosyphon Loop Used in HVAC Systems

CFD simulation on the operation characteristics of CO 2 two-phase thermosyphon loop

An Experimental Study Of Thermal Performance Of A Two-Phase Loop Thermosyphon (Tplt)-Based Steam Generator: Effects Of Thermal Boundary Conditions

Effect of Height Difference on the Performance of Two-phase Thermosyphon Loop Used in Air-conditioning System

Investigation of the thermal response characteristics of the loop thermosyphon under convective boundary conditions

A practical design method for two-phase thermosyphon loop based on approaching degree to “ideal cycle”

Theoretical and Experimental Analyses of Two-Phase Flow Condensation Heat Transfer Inside the Horizontal Micro-Fin Tube

Numerical study of Two-Phase flow behavior during dryout in a Two-Phase closed thermosyphon under thermal boundary conditions

Three Typical Operating States of an R744 Two-Phase Thermosyphon Loop

Experimental and theoretical analysis of a closed loop two-phase thermosiphon under various states for latent heat storage

Simulation of a two-phase loop thermosyphon using a new interface-resolved phase change model

Performance Evaluation and Analysis of a Vertical Heat Pipe Latent Thermal Energy Storage System with Fins-Copper Foam Combination