Abstract:Commercial EUV lithographic systems require multilayers with higher reflectance and better stability than those published to date. This work represents our effort to meet these specifications. Interface-engineered Mo-Si multilayers with 70% reflectance and 0.545-nm bandwidth at 13.5-nm wavelength and 71% reflectance with 0.49-nm bandwidth at 12.7-nm wavelength were developed. These results were achieved with 50 bilayers. These new multilayers consist of alternating Mo and Si layers separated by thin boron carbide layers. Depositing boron carbide on the interfaces leads to reduction in molybdenum silicide formation of the Mo-on-Si interfaces. Bilayer contraction is reduced by 30%, implying that there is less intermixing of Mo and Si to form silicide. As a result, the Mo-on-Si interfaces are sharper in interface-engineered multilayers than in standard Mo-Si multilayers. The optimum boron carbide thicknesses have been determined and appear to be different for the Mo-on-Si and Si-on-Mo interfaces. The best results were obtained with 0.4-nm-thick boron carbide layers for the Mo-on-Si interfaces and 0.25-nm-thick boron carbide layers for the Si-on-Mo interfaces. The increase in reflectance is consistent with multilayers having sharper and smoother interfaces. A significant improvement in oxidation resistance of EUV multilayers has been achieved with ruthenium-terminated Mo-Si multilayers. The best capping-layer design consists of a Ru layer separated from the top Si layer by a boron carbide diffusion barrier. This design achieves high reflectance and the best oxidation resistance during EUV exposure in a water-vapor (oxidizing) environment. Electron-beam exposures of 4.5 h (in an effort to simulate EUV exposure perturbation of the top layers) in the presence of 5×10−7-Torr water-vapor partial pressure show no measurable reflectance loss and no increase in the oxide thickness of Ru-terminated multilayers. © 2002 Society of Photo-Optical Instrumentation Engineers.

Optical and structural performance of the Al(1%wtSi)/Zr reflection multilayers in the 17-19nm region.

The transition from amorphous to crystalline in Al/Zr multilayers

Mo/Si Multilayers with Different Barrier Layers for Applications as Extreme Ultraviolet Mirrors

Thermally induced structural modification in the Al/Zr multilayers

Improved reflectance and stability of Mo-Si multilayers

Performance, structure, and stability of SiC/Al multilayer films for extreme ultraviolet applications

Introduction of Zr in Nanometric Periodic Mg/Co Multilayers

A comparative study of the interfacial roughness correlation and propagation in Mo/Si multilayers deposited using RF-magnetron sputtering on silicon, ule and zerodur substrates

Microstructure and Electronic Properties of Al/Zr/Linbo3 Multilayers

Al/Zr-based multilayer mirrors with record-breaking reflectivity.

Iridium/silicon multilayers for extreme ultraviolet applications in the 20-35 nm wavelength range

Atomic-precision multilayer coating of the first set of optics for an extreme-ultraviolet lithography prototype system

Optical, Chemical, Depth and Magnetic Characterization of Mg/Co-Based Nanometric Periodic Multilayers

Experimental comparison of extreme-ultraviolet multilayers for solar physics

EUV reflectance and scattering of Mo/Si multilayers on differently polished substrates

Preparation of Sol–gel ZrO2–SiO2 Highly Reflective Multilayer Films and Laser-Induced Damage Threshold Characteristic

Ultrasmooth Ti/Al multilayer with a Ti seed layer for EUV applications

Comparative Study on Microstructure of Mo/Si Multilayers Deposited on Large Curved Mirror with and without the Shadow Mask

Design and performance of capping layers for extreme-ultraviolet multilayer mirrors

Transparent conductive and near-infrared reflective Cu-based Al-doped ZnO multilayer films grown by magnetron sputtering at room temperature

Multilayered Coatings with Alternate Zrn and Tialn Superlattices