Abstract:In this paper, a temperature sensing scheme with a miniature MZI structure based on the principle of inter-mode interference is proposed. The sensing structure mainly comprises single mode–coreless–multimode–coreless–single mode fibers (SCMCSs), which have been welded together, with different core diameters. The light beam has been expanded after passing through the coreless optical fiber and is then coupled into a multimode optical fiber. Due to the light passing through the cladding and core mode of the multimode optical fiber with different optical paths, a Mach–Zehnder interferometer is formed. Moreover, due to the thermo-optic and thermal expansion effects of optical fibers, the inter-mode interference spectrum of a multimode fiber shifts when the external temperature changes. Through theoretical analysis, it is found that the change in the length of the sensing fiber during temperature detection has less of an effect on the sensitivity of the sensing structure. During the experiment, temperature changes between 20 and 100 °C are measured at sensing fiber lengths of 1.5 cm, 2.0 cm, 2.5 cm, 3.0 cm, 3.5 cm, and 4.0 cm, respectively, and the corresponding sensitivities are 65.98 pm/°C, 72.70 pm/°C, 67.75 pm/°C, 66.63 pm/°C, 74.80 pm/°C, and 72.07 pm/°C, respectively. All the corresponding correlation coefficients are above 0.9965. The experimental results indicate that in the case of a significant change in the length of the sensing fiber, the sensitivity of the sensing structure changes slightly, which is consistent with the theory that the temperature sensitivity is minimally affected by a change in the length of the sensing fiber. Therefore, the effect of the length on sensitivity in a cascade-based fiber structure is well solved. The sensing scheme has an extensive detection range, small size, good linearity, simple structure, low cost, and high sensitivity. It has a good development prospect in some detection-related application fields.

All Single-Mode Fiber Mach–Zehnder Interferometer Based on Two Peanut-Shape Structures

Mach-Zehnder Interferometers Assembled with Optical Microfibers or Nanofibers

In-Fiber Mach–Zehnder Interferometer Based on Er Doped Up-Taper and Peanut-Shaped Fiber Structure in Fiber Ring Laser

A Mach–Zehnder Interferometer Based on a No-Core Fiber With In-Fiber Waveguides

A Core-Offset Mach Zehnder Interferometer Based on A Non-Zero Dispersion-Shifted Fiber and Its Torsion Sensing Application

All-fiber tunable mode converter for a mini-two-arm Mach-Zehnder interferometer

Optical Fiber Mach-Zehnder Interferometer Based on a Pair of Microholes

Investigation of an inline fiber Mach-Zehnder interferometer based on hybrid joints of core-offset and peanut-shape for refractive index sensing

Fiber in-line Mach-Zehnder interferometer based on a pair of short sections of waveguide

Mode transition phenomena into an in-fiber Mach-Zehnder interferometer

Sensitivity Enhanced Refractive Index Sensor With In-Line Fiber Mach-Zehnder Interferometer Based on Double-Peanut and Er-Doped Fiber Taper Structure

Single S-Tapered Fiber Mach-Zehnder Interferometers

Mach-Zehnder Interferometer Based on Coupled Dielectric Pillars

A Micro-Mach–Zehnder Interferometer Temperature Sensing Design Based on a Single Mode–Coreless–Multimode–Coreless–Single Mode Fiber Cascaded Structure

Simultaneous Measurement of Refractive Index and Temperature Using a Mach-Zehnder Interferometer with Forward Core-Cladding-core Recoupling

Improved Mach-Zehnder Interferometer With Micro-Ring-Resonator-Based Two-Beam Interferometer

High sensitivity compact Mach Zehnder interferometer based on the cascade application of seven-core fiber and graded index multimode fiber

Photonic crystal all-fiber Mach-Zehnder Interferometer sensor based on phase demodulation

Bent Fiber Interferometer

An All Fiber Mach-Zehnder Interferometer Based on Tapering Core-Offset Joint for Strain Sensing

Multibeam Interferometer Using a Photonic Crystal Fiber with Two Asymmetric Cores for Torsion, Strain and Temperature Sensing