Abstract:This work reports on a novel in-fiber Mach-Zehnder interferometer (MZI) device which is able to exploit the mode transition phenomena to tailor the sensitivity to external refractive index (RI). The proposed MZI structure is extremely simple: it consists of a small section of single mode double cladding fiber (DCF) in between two sections of standard single mode fiber using the core-offset splicing approach. The DCF presents a W-shaped RI profile with the outer cladding having a greater RI than the inner cladding. Therefore, the mode transition of cladding modes from outer to inner cladding of the DCF can be induced by tailoring the cladding thickness, in turn enhancing the sensitivity to surrounding refractive index. Specifically, wet chemical etching employing hydrofluoric acid is used to reduce the outer cladding diameter. Here, we report a comprehensive study of the phenomena while fiber diameter is decreased by 30 µm. Moreover, a specific study case with DCF diameter of 112 µm demonstrates a sensitivity gain of 2.5 over unetched fiber in the refractive index range of 1.33–1.39. Temperature and mechanical stress cross sensitivities are also evaluated. The suggested sensing device's advantages of considerable compactness, low manufacturing cost, simple fabrication technique, and higher sensitivity will be useful for future applications in the bio-chemical sensing and others.

All-fiber tunable mode converter for a mini-two-arm Mach-Zehnder interferometer

Mach-Zehnder Interferometers Assembled with Optical Microfibers or Nanofibers

Optimization of Few-Mode-Fiber Based Mode Converter for Mode Division Multiplexing Transmission

A Core-Offset Mach Zehnder Interferometer Based on A Non-Zero Dispersion-Shifted Fiber and Its Torsion Sensing Application

Widely tunable dual acousto-optic interferometric device based on a hollow core fiber

Improved Mach-Zehnder Interferometer With Micro-Ring-Resonator-Based Two-Beam Interferometer

Mode transition phenomena into an in-fiber Mach-Zehnder interferometer

Bent Fiber Interferometer

An All Fiber Mach-Zehnder Interferometer Based on Tapering Core-Offset Joint for Strain Sensing

Multibeam Interferometer Using a Photonic Crystal Fiber with Two Asymmetric Cores for Torsion, Strain and Temperature Sensing

All-fiber modulator derived from the large-transverse-offset Mach-Zehnder interferometer coated with ITO

High-Sensitivity Curvature Fiber Sensor Based on Miniature Two-Path Mach-Zehnder Interferometer

In-Fiber Mach–Zehnder Interferometer Based on Er Doped Up-Taper and Peanut-Shaped Fiber Structure in Fiber Ring Laser

Curvature sensor based on femtosecond laser-inscribed straight waveguide in FMF

An All-Fiber Mode Converter Assisted by Coiled-Fiber Long-Period Grating

A Curvature Mach-Zehnder Interferometer Fiber Sensor Based on Triple Cladding and Coreless Fiber

All-optical tunable multi-channel mode conversion based on a modal interferometer using two-mode fiber

High sensitivity compact Mach Zehnder interferometer based on the cascade application of seven-core fiber and graded index multimode fiber

High-performance vector torsion sensor based on high polarization-dependent in-fiber Mach-Zehnder interferometer.

Sensitivity amplification of fiber-optic in-line Mach–Zehnder Interferometer sensors with modified Vernier-effect

Multi-modes Interferometer for Magnetic Field and Temperature Measurement Using Photonic Crystal Fiber Filled with Magnetic Fluid