Abstract:The key remaining technological challenge to the realization of further power scaling for high-power fiber laser systems is overcoming the stimulated Raman scattering (SRS) effect. In past years, chirped and tilted fiber Bragg gratings (CTFBGs) have been demonstrated to be a simple and effective way to suppress SRS in high-power fiber amplifiers. However, the weak reflection at the Bragg wavelength could be strongly amplified, which not only limits the power and efficiency but also degrades the beam quality. We report here, for the first time to the best of our knowledge, the influence of the residual Bragg reflection of CTFBGs on SRS suppression in high-power fiber laser systems. Two groups of CTFBGs with different Bragg reflection wavelengths are fabricated and used for the comparison experiments. Test results show that the CTFBGs of longer Bragg wavelengths have a better suppression effect, in particular, at a higher power level. By further moving the Bragg wavelength of a CTFBG out of the Raman gain spectral range, a better suppression effect and a promotion in laser efficiency could be achieved, which is very useful for further power scaling.

Performance of Large Aperture Tapered Fiber Phase Conjugate Mirror with High Pulse Energy and 1-Khz Repetition Rate

High-dispersive Mirror for Pulse Stretcher in Femtosecond Fiber Laser Amplification System

Fiber-solid, Hybrid, Single-Frequency Laser (100 W) with a 100 MHz Repetition Rate and 1 Ns Pulse Width from a Spherical Aberration Compensated Four-Stage Nd:YVO4 Amplifier

High Dispersion Compensation Mirrors for Pulse Stretching in Chirped Pulse Amplifiers

Design of Ultrabroadband Double-Chirped Mirror Pairs for Ultrafast Lasers

Phase Conjugating Mirror Combining A Fused Silica Rod and A Fiber

Influence of Bragg Reflection of Chirped Tilted Fiber Bragg Grating on Raman Suppression in High-Power Tandem Pumping Fiber Amplifiers.

Enhanced beam quality of high-energy lasers utilizing fused silica as an all-solid-state SBS-PCM

Experimental Study on Optical Tapered Fiber Phase-conjugator in MOPA System

Tapered-Fiber Phase Conjugator with High Stability and High Reflectivity Used for Master-Oscillator Power Amplifier Systems

LD pumped laser MOPA system with a phase conjugating mirror of a fused silicon rod

High Pulse Repetition Rate Double-Pass Amplifier with the Liquid Phase Conjugating Mirror

670 Kw Nanosecond All-Fiber Super-Irradiation Pulsed Amplifiers at High Repetition Rates

Hybrid fiber-single crystal fiber chirped-pulse amplification system emitting more than 1.5 GW peak power with beam quality better than 1.3

Fiber Phase Conjugation in Laser Diode-Pumped,Electrooptical Q-Switched Laser with Double-Pass Amplifier

Experimental study on high repetition rate quartz glass rod stimulated Brillioum scattering phase-conjugation

Pulse shaping, high average power narrow linewidth Er, Yb co-doped fiber amplifier

Low repetition rate broadband high energy and peak power nanosecond pulsed Yb-doped fiber amplifier

Improvement of the Beam Quality of the High Power Solid State Laser Using Phase Conjugation

Linearly-polarized single-transverse-mode high-energy multi-ten nanosecond fiber amplifier with 50W average power.

Nd : Yag Master-Oscillator Power Amplifier with an Optical Fiber Phase Conjugating Mirror