Abstract:Highly porous carbon/SnO2/TiO2 nanocomposite films that can be used as counter electrodes in dye-sensitized solar cells (DSSCs) are fabricated by coating a homogeneous and viscous carbon paste on F-doped tin oxide conducting glass. The carbon paste is prepared by ball-milling a mixture of carbon, SnO2 powder and TiO2 hydrosol in an organic solution. The composite films are characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscope, Brunauer-Emmett-Teller and Form Talysruf Profiler. The results indicate that the photovoltaic performances of the composite DSSCs are influenced by the content of SnO2. When the content is increased to 30%. SnO2 not only acts as "framework" to strengthen the mechanical stability of the composite film but also increases the specific surface area and root-mean-square roughness, which improve fill factor and short-circuit current, finally increasing power conversion efficiency from 5.12% to 6.15%. Cyclic voltammetry analysis and electronic impedance spectroscopy of the optimum composite film display higher catalytic activity for I-3(-)/I- redox reactions and much lower charge-transfer resistance compared with Pt, respectively. Dye-sensitized solar cells based on this nanocomposite counter electrode achieve efficiency as high as 6.15% which is comparable to that of the cells using sputtering Pt as counter electrode at similar conditions. (C) 2011 Elsevier B.V. All rights reserved.

Nitrogen-doped carbon nanotube-based bilayer thin film as transparent counter electrode for dye-sensitized solar cells (DSSCs).

Facile Synthesis of Nitrogen-Doped Reduced Graphene Oxide As an Efficient Counter Electrode for Dye-Sensitized Solar Cells

A novel carbon nanotube/polymer composite film for counter electrodes of dye-sensitized solar cells

Film Thickness of Transition Metal MoS2/CNFs Electrode Effect on Dye-Sensitized Solar Cell

Transparent MoS<sub>2</sub>/PEDOT Composite Counter Electrodes for Bifacial Dye-Sensitized Solar Cells

Functionalized Reduced Graphene Oxide Loaded Aligned Carbon Nanotube Layer Used As Counter Electrode for Dye-Sensitized Solar Cells.

Nitrogen-doped carbon nanotubes with metal nanoparticles as counter electrode materials for dye-sensitized solar cells.

Highly Efficient Dye-Sensitized Solar Cells Based on Carbon Nanofibers Counter Electrodes

Enhanced Efficiency of Dye-Sensitized Solar Cells Based on Polymer-Assisted Dispersion of Platinum Nanoparticles/Carbon Nanotubes Nanohybrid Films as FTO-Free Counter Electrodes

A novel fabrication of a well distributed and aligned carbon nanotube film electrode for dye-sensitized solar cells

Vertically Aligned Carbon Nanotubes/Graphene Hybrid Electrode As A Tco- And Pt-Free Flexible Cathode For Application In Solar Cells

Three-Dimensional Vertically Aligned Hybrid Nanoarchitecture of Two-Dimensional Molybdenum Disulfide Nanosheets Anchored on Directly Grown One-Dimensional Carbon Nanotubes for Use As A Counter Electrode in Dye-Sensitized Solar Cells

Anthocyanin-sensitized Solar Cells Using Carbon Nanotube Films As Counter Electrodes

Nitrogen-Doped Graphene As Transparent Counter Electrode for Efficient Dye-Sensitized Solar Cells

Functionalization of Aligned Carbon Nanotubes Used As Counter Electrode for Dye-Sensitized Solar Cells

Nitrogen Doped Porous Graphene As Counter Electrode for Efficient Dye Sensitized Solar Cell

A Low Cost Mesoporous Carbon/sno2/tio2 Nanocomposite Counter Electrode for Dye-Sensitized Solar Cells

Graphene wrapped copper–nickel nanospheres on highly conductive graphene film for use as counter electrodes of dye-sensitized solar cells

NiCo2O4/carbon nanofibers composite as an efficient counter electrode for dye-sensitized solar cells

Vertically aligned single-walled carbon nanotubes as low-cost and high electrocatalytic counter electrode for dye-sensitized solar cells.

Penetrated and aligned carbon nanotubes for counter electrodes of highly efficient dye-sensitized solar cells