Abstract:Cellular materials under high-velocity impact have highly localized deformation with the cells layer-wise collapse, which is usually characterized by the propagation of shock wave. Researches have shown that the shock wave speed is strongly dependent on the impact velocity, but the effect of the meso-structural and base-material parameters is unclear. In this study, the dynamic material parameters of closed-cell foams are investigated with cell-based finite element models. The one-dimensional velocity distribution along the loading direction is used to capture the propagation of shock front. The shock wave speed is thus determined and it exhibits a linear relationship with impact velocity when the impact velocity is high enough. The difference between the shock wave speed and the impact velocity is a dynamic material parameter of cellular material and the effect of meso-structural and base-material parameters on this dynamic material parameter is investigated with dimensional analysis. An expression of the dynamic material parameter with respect to the relative density and the base-material parameters is obtained. It shows that the dynamic material parameter intensively relies on the relative density and increases linearly with the relative density. The investigation of dynamic stresses with the aid of a shock model shows that the initial crushing stress increases in a power-law tendency with the increase of relative density. As a result, a stress strain relation involving the relative density of material cellular and the yield stress and density of base material is obtained for the closed-cell foams considered. The effects of hardening behaviors of cell-wall material and gas trapped within cells are also considered. It is found that the dynamic material parameter exhibits nearly linear increase with the increase of hardening parameters of base material and initial gas pressure, while the dynamic initial crushing stress is independent of the strain-hardening parameter and the entrapped gas pressure but increases with the strain-rate hardening parameter linearly. These findings may be helpful for guiding the crashworthiness design of cellular materials and structures. (C) 2016 Elsevier Ltd. All rights reserved.

Large Mass Protection with Close-celled Metallic Foams under Low Velocity Impact: Spring-damper-foam Collision Model

A Double Degree Freedom Mass-Spring-Damper-Foam Collision Model for High Porosity Metallic Foams

Critical conditions and optimal design of closed-celled aluminum foam protection under low velocity impact

Numerical Simulation Investigation in Behavior of Al-Foams Structure under Hypervelocity Impact

Low Strain Rate Compressive Behavior of High Porosity Closed-Cell Aluminum Foams

Experimental and mesoscopic investigation of double-layer aluminum foam under impact loading

Mechanical properties and energy absorption capabilities of aluminium foam sandwich structure subjected to low-velocity impact

Mechanical Properties Of Open-Cell Metal Foams Under Low-Velocity Impact Loading

On low-velocity impact response of foam-core sandwich panels

Dynamic Response of Foam-Filled Rectangular Tubes Subjected to Low-Velocity Impact

Dynamic response and energy absorption of aluminum foam sandwich under low-velocity impact

Dynamic Response of Slender Multilayer Sandwich Beams with Metal Foam Cores Subjected to Low-Velocity Impact

Numerical Simulation in Effect of Geometrical Parameters of Al-foam on Performance of Stuffed Shields

Dynamic response of foam concrete under low-velocity impact: experiments and numerical simulation

Experimental, numerical and analytical studies on the aluminum foam filled energy absorption connectors under impact loading

Dynamic Material Parameters of Closed-Cell Foams under High-Velocity Impact

Dynamic Response of Foam Core Sandwich Panel with Composite Facesheets During Low-Velocity Impact and Penetration

Dynamic crushing models for a foam rod striking a rigid wall

Dynamic parameters of multi-cabin protective structure subjected to low-impact load – Numerical and experimental investigations

Low-velocity impact resistance of all composite cylindrical shell panels with a foam filled honeycomb core: Theoretical and experimental investigation

An Energy Absorber Based on Foam-Filled Composite Tubes and Simulation of Its Application to Crashworthy Seats