Abstract:A coupled thermo-metallo-mechanical model is proposed to analyse the temperature, stress and microstructure fields in multi-pass welding of P92 pipes. An axisymmetric model is adopted to increase the efficiency of the simulation. To preserve the temperature field from a three-dimensional (3D) analysis, a procedure is proposed to convert the 3D result into a two-dimensional (2D) form, which is compared to temperature fields created by other 2D heat transfer analyses. A metallurgical algorithm, which does not need the calibration with metallurgical experiments, is implemented in the finite element (FE) analysis to predict spatial distributions of product phases during multi-pass welding. Comparison between the predictions and the metallurgical graphs is made to verify the effectiveness of the metallurgical analysis after twenty thermal cycles. Hardness test is also employed to characterize the microstructure and to validate the metallurgical predictions. Five temperature fields, one created from the newly proposed approach and four from existent ones, are used as external loads to conduct the mechanical analysis. The volumetric change due to the phase transformation is considered as an extra volumetric strain, which is implemented by user subroutine. The stress distributions predicted using the five temperature fields are plotted together with the 3D stress result to examine the effectiveness of the developed procedure. The stress at the external surface of the pipe is measured by the X-ray diffraction technique, and is further compared to the stress predictions. The advantage of the model is demonstrated by comparing the computational time consumed in the mechanical analysis.

Test verification of an extensometer for deformation measurement of high temperature straight pipes

Application of Depth-Sensing Indentation Testing Technology in Studying the Mechanical Properties Change of Boiler Tubes

Self-sensing Joints for In-Situ Structural Health Monitoring of Composite Pipes: A Piezoresistive Behavior-Based Method

EXPERIMENTAL RESEARCH AND FINITE ELEMENT ANALYSIS ON A WELDED JOINT WITH TUBES INTERSECTED AT TWO DIFFERENT POINTS

Investigation of pipe thickness monitoring using the shear wave EMAT technology with high lift-off distance

Study of sections strain of undersea immersed tube tunnel based on optical fiber grating technology

A new on-line ultrasonic thickness monitoring system for high temperature pipes

Safety Testing and Analysis of the Header of the Drawn Boiler with a Small Diameter and a Large Wall Thickness

Non-destructive Evaluation of Spiral-welded Pipes Using Flexural Guided Waves

Thermal, metallurgical and mechanical analysis of circumferentially multi-pass welded P92 steel pipes

Simulation and experimental verification on fluid-structure interaction of T-shaped pressure pipeline

1509 Microwave Measurement and Evaluation of Wall Thinning in Metal Pipes

Test evaluation of high strain line pipe material

Testing Equipment for Composite Pipes under Complex Loads Simulating Marine Condition

Analysis of three-roller continuous and synchronous calibration process of straightness and ovality for large thin-walled pipes considering the weld

Development and Evaluation of Temperature Sensing Smart Skin for High-Temperature Measurements in Pipes

Design and performance verification of thermal protection structure of high temperature probe in aeroengine

Study on performance degradation of main steam pipe of X20CrMoV12.1 steel for long-term service

Research on the Mechanical Properties and Temperature Compensation of an Intelligent Pot Bearing for a Pipe-Type Welding Strain Gauge

Experimental Study on 100 Hour-Term Performance of High-Temperature Sodium Heat Pipes

Study on the High Temperature Deformation Measurement Using the Mark Shearing Technique