Abstract:Uniaxial compression test was carried out to study the combined effects of inclination angle of prefabricated closed crack and strain rate on the mechanical properties and fracturing behaviors of fissured rock. The experimental results demonstrate that strain rate and inclination angle of closed crack α significantly affect the mechanical properties and fracturing behaviors of fissured specimens. Under the combined effect of strain rate and inclination angle, the shear dominant failure pattern was the main failure pattern for the specimens with prefabricated closed crack α = 60° while the tensile dominant failure pattern was the main fracturing patterns for others. When α was invariant, the peak strength, strain at peak stress and post-peak softening modulus rose with the increase of the strain rates; on the contrary, the residual compressive strength decreased with the increase of the strain rates. Under the same strain rate, the peak strength first decreased and then increased. Besides, the strain at peak stress firstly increased and then decreased with the increase of α. The post-peak softening modulus increased before the crack inclination angle α reached to 45°, and then decreased. Meanwhile, the change law of residual compressive stress with the increase of inclination angle of closed crack was increase–decrease-increase. Under the same strain rate, the initiation angle at the loading end of the prefabricated closed crack first decreased and then increased, while the initiation angle θ 1 at the bearing end decreased with the increase of α. When α was constant, the initiation angle at the loading end decreased before α reached to 60° with the increase of strain rate, and then increased when α = 90°. Meanwhile, the initiation angle at the bearing end decreased with the increase of strain rate. Under the same strain rate and the same inclination angle, due to unidirectional loading, the initiation angle at bearing end was relative smaller than the initiation angle at the loading end and the crack initiation at the loading end of the prefabricated crack was earlier than that at the bearing end.

Strain Rate Effects on the Interaction Between an Eccentric Matrix Crack and a Circular Inclusion in Composites under Dynamic Loadings

Elastic–plastic stress investigation for an arc-shaped interface crack in composite material

Elastic-Plastic Fracture Behavior Analysis On A Griffith Crack In The Cylindrical Three-Phase Composites With Generalized Irwin Model

Study on the Crack–inclusion Interaction with Coupled Mechanical and Thermal Strains

Investigation on mixed-mode dynamic stress intensity factors of an interface crack in bi-materials with an inclusion

A Zener–Stroh Crack in Fiber-Reinforced Composites with Generalized Irwin Plastic Zone Correction

Numerical Simulation of Strain Rate Effect on the Inelastic Behavior of Metal Matrix Composites

Study on the plane stress mode II crack–inclusion interaction with coupled mechanical and thermal strains

Plastic Zone Correction on a Zener–Stroh Crack Interacting with a Circular Inclusion in Ductile Materials

Interaction Between a Crack and a Circular Liquid Inclusion

Experimental Investigation on Strain Rate Effect of High-Performance Fiber Reinforced Cementitious Composites Subject to Dynamic Direct Tensile Loading

Rate-dependent mechanical characteristics of rock-like specimens containing single closed crack

Crack–inclusion Interaction Due to Mismatched Thermal Expansion under Plane Stress Condition

Study on Crack-Inclusion Interaction Using Digital Gradient Sensing Method

Study on the Effect of Inclusion Shape on Crack-Inclusion Interaction Using Digital Gradient Sensing Method

Stress Investigation on a Cracked Craze Interacting with a Nearby Circular Inclusion in Polymer Composites

Effect of Multiple Matrix Cracking on Crack Bridging of Fiber Reinforced Engineered Cementitious Composite

Strain rate influence on nonlinear response of polymer matrix composites

Crack Velocity- and Strain Rate- Dependent Dynamic Compressive Responses in Brittle Solids

A Zener–Stroh Crack Interacting with a Coated Inclusion with Generalized Irwin Plastic Zone Correction

Interface Diffusion-Induced Creep in Metal Matrix Particulate Composites under Triaxial Loading