Abstract:The purpose of this study is to experimentally and numerically investigate thermal and residual deformations of plastic ball grid array (PBGA) package and assembly. In the experiments, a full-field shadow moire with a sensitivity of 29.2 mum/fringe is used for measuring their real-time out-of- plane deformations (warpages) during heating and cooling conditions. The elastic moduli (Es) and coefficients of thermal expansion (CTEs) for epoxy molding compound (EMC) and organic substrate are measured in terms of temperatures by dynamic mechanical analyzer (DMA) and thermo-mechanical analyzer (TMA), respectively. And a finite element method with the input of these measured material properties is employed to numerically simulate the thermally-induced deformations of them, in order to understand the insight of mechanics. The full-field warpages of the PBGA package and assembly from shadow moire were documented during the temperature cycling (from room temperature to 220degC). It is interesting that the maximum warpages with concave shape for both the package and assembly occur at near 155degC during this thermal cycling, (rather than with convex shape at room temperature by assuming the warpage-free (or stress-free) temperature is at 175degC of molding). This issue has been resolved through the finite element analyses by cooperating with the residual strain (stress) in the EMC of the package, which is obtained by measuring the residual and thermal deformations of the detached EMC/die bi-material structure. This residual strain of the EMC maybe comes either from the chemical shrinkage of the EMC curing, or more possible stress relaxation of the EMC during the first solder reflow of attaching the solder balls. Furthermore, the thermal deformations for both the package and assembly were fully addressed by the finite element models. Both consistent results indicate that the more severe coplanarity with the value of about 275 mum at the corner of the substrate with the size of 40 times 40 times 1.7 mm occurs at near 155degC, due to the Tg and residual strains of the EMC, rather than at the room temperature. This severe coplanarity can be mitigated by lowering the residual shrinkage strain. And the warpage of the PBGA assembly coincides with the package at the temperature beyond 155degC (highly resulting from apparent creep of the solder balls), but is larger than that of the package below 155degC, due to constraint of the PCB through less-pronounced creep solder balls.

The Influence of Die Tilting on the Thermal Response and Die Attach Stress of a Bottom Exposed Package

Effect of Die Size and Die Tilt on Solder Reliability under Thermal Cycling

Mechanism Investigation on Die Tilt in Die Attach Process Based on Minimal Free Energy Theory

Effect of Die Shape on Die Tilt in Die Attach Process

Evaluation of the impact of solder die attach versus epoxy die attach in a state of the art power package

Thermal Stress Analysis and Optimization in Stacked Die Package Under Power Load

Numerical Simulation of Reliability of 2.5D/3D Package Interconnect Structure under Temperature Cyclic Load

Interfacial Delamination Characterization and Thermo-mechanical Reliability of Stacked Die Package by Finite Element Analysis

Effects of Copper Plating Thickness of Ni/Fe Alloy Leadframe on Thermo-Mechanical and Die Cracking Behaviors of Small Outline Transistor (SOT) Packages

Influence of Material Properties on Ruggedness Evaluation of Package Architectures for SiC Power Devices

Effect of Thermal Cycling on the Strain and Stress Distribution of TSVs and Solder Bumps in Stacked Package Structure

Finite element analysis of 2.5D packaging processes based on multi-physics field coupling for predicting the reliability of IC components

Thermal Performance And Reliability Management For Novel Power Electronic Packaging Using Integrated Base Plate

Characterization of packaging warpage, residual stress and their effects on the mechanical reliability of IGBT power modules

The Influence of Solder on the Thermal Stress in a FCOL Device

Effect of Solder Layer Voids on the Thermal Resistance of Power Device Package

The delamination of solder ball involving moisture and thermal effect in IC package

Exploring modeling and testing approaches for three-dimensional integrated thermal resistance of chiplets

Stress Analysis and Structural Optimization of 3-D IC Package Based on the Taguchi Method

Comparison between Experimental Measurement and Numerical Analysis of Warpage in PBGA Package and Assembly with the Consideration of Residual Strain in the Molding Compound

Thermal Stress Analysis in Stacked Die Package under Power Load