Abstract:Ternary alloy CdS x Se 1–x has the physical properties of CdS and CdSe, and its band gap can be adjusted by changing the component ratio of the elements. The alloy has excellent photoelectric properties and has potential application in optoelectronic devices. Although one has made some research progress of the CdSSe-based photodetectors, their performances are still far from the commercial requirements, so how to improve the performance of the device is the focus of current research. In this work, a single crystal CdS 0.42 Se 0.58 nanobelt device is first prepared by thermal evaporation. Under 550 nm illumination and 1 V bias, the ratio of photocurrent to dark current of the device is 1.24×10~3, the responsivity arrives at 60.1 A/W, and the external quantum efficiency reaches 1.36×10~4%, and the detectivity is 2.16×10 11 Jones. Its rise time and fall time are about 41.1/41.5 ms, respectively. Secondly, after the CdSSe nanobelt is decorated by Au nanoislands, the optoelectronic performance of the device is significantly improved. Under 550 nm illumination and 1 V bias, the I p /I d ratio, responsivity, external quantum efficiency and detectivity of the device are increased by 5.4, 11.8,11.8 and 10.6 times, respectively, and the rise time and fall time are both reduced to half of counterparts of single CdSSe nanobelt. Finally, the microscopic physical mechanism of the enhanced optoelectronic performance of the device is explained based on localized surface plasmon resonance of Au nanoislands. After the combination of gold nanoislands and CdSSe nanobelt, the difference in Fermi level between them results in the transfer of electrons from CdSSe nanobelt to Au nanoislands, thus forming an internal electric field at the interface, which is directed from CdSSe nanobelt to Au nanoislands. Under illumination, the electrons in the Au nanoislands acquire enough energy to jump over the Schottky barrier because of localized surface plasmon resonance. These photoexcited hot electrons are trapped and stored in extra energy levels above the conduction band minimum, and then are cooled down to the band edge, thus realizing the transfer of electrons from Au nanoislands to CdSSe nanobelt. Moreover, the internal electric field also greatly promotes the transfer of hot electrons from Au nanoislands to CdSSe nanobelt, and inhibits the recombination of carriers at the interface,resulting in large photocurrent. Our work provides an effective strategy for fabricating high-performance photodetectors without increasing the device area.

Ultrahigh Quantum Efficiency of CuO Nanoparticle Decorated In2Ge2O7 Nanobelt Deep-Ultraviolet Photodetectors

High‐Performance Ultraviolet Photodetectors Enabled by van der Waals Schottky Junction Based on TiO2 Nanorod Arrays/Au‐Modulated Ti3C2Tx MXene

Ultrahigh Quantum Efficiency Photodetector and Ultrafast Reversible Surface Wettability Transition of Square In2O3 Nanowires

Enhanced Performance of a Graphene/gaas Self-Driven Near-Infrared Photodetector with Upconversion Nanoparticles.

ZnO Quantum Dot/MXene Nanoflake Hybrids for Ultraviolet Photodetectors

CuO Nanosheets for Use in Photoelectrochemical Photodetectors

An Optimized Ultraviolet‐A Light Photodetector with Wide‐Range Photoresponse Based on ZnS/ZnO Biaxial Nanobelt

High-Performance Self-Powered Photoelectrochemical Ultraviolet Photodetectors Based on an In 2 O 3 Nanocube Film

Enhancing Photoelectric Response of Self-powered UV and Visible Detectors Using CuO/ZnO NRs Heterojunctions

High-performance ultraviolet photodetector based on Sn-doped CuO@ZnO nanorod arrays composites

Ultraporous Electron‐Depleted ZnO Nanoparticle Networks for Highly Sensitive Portable Visible‐Blind UV Photodetectors

High-performance Photodetectors Based on Au Nanoislands Decorated CdSSe Nanobelt

From UV to Vis Broadband Photodetectors Based on ZnO/CuO/NiO Core–Shell–Shell Heterojunction Nanostructures

Ultraviolet–visible photodetectors based on surface plasmon-polymer coupled inorganic/organic thin film heterojunction

Ultrahigh-performance solar-blind photodetectors based on individual single-crystalline In₂Ge₂O₇ nanobelts.

Nanoscale-Thick CuPc/β-Ga2O3 P–n Junctions for Harsh-Environment-Resistant Self-Powered Deep-UV Photodetectors

High Performance Charge-Transfer Induced Homojunction Photodetector Based on Ultrathin ZnO Nanosheet

High-speed ultraviolet photodetectors based on 2D layered CuInP 2 S 6 nanoflakes

Bandgap engineering in CuO nanostructures: Dual-band, broadband, and UV-C photodetectors

In-situ fabrication of PtSe2/GaN heterojunction for self-powered deep ultraviolet photodetector with ultrahigh current on/off ratio and detectivity

High-Performance Near-Infrared Photodetector Based on PbS Colloidal Quantum Dots/ZnO-Nanowires Hybrid Nanostructures