Abstract:<p>A molecular dynamic model of diamond abrasive polishing single crystal silicon is established. The effects of pores on the material removal process and the mechanism of pore wall material removal are studied from the aspects of displacement, polishing force, and phase transformation. The simulation results show that the removal method of material at pore walls is mainly shear and extrusion. The deformation of the pore walls in the entry areas of pores is an elastoplastic mixed deformation, and the deformation of the pore walls in the exit areas of pores is plastic deformation. Increasing the polishing depth increases plastic removal of material at pores. The existence of pores makes the tangential and normal forces decrease to a certain extent during the entire polishing process. The fluctuation of the normal polishing force is greater than that of the tangential polishing force. The lack of material at the pores is the main reason for the decrease of the normal polishing force. As the polishing depth increases, the tangential force increases significantly, and the normal force increases less. During the polishing process, phase transformation atoms with coordination number of 5 and phase transformation atoms with coordination number of 6 are main types of phase transformation atoms. High-pressure phase transformation is the main form of phase transformation. Due to the lack of atoms at the pores, the phase transformation of the pore walls in the entry areas of pores will be extended longitudinally. In the process of increasing the polishing depth, the number of main phase transformation atoms increased, and the degree of phase transformation in the pore area deepened.</p>

Planarization process of single crystalline silicon asperity under abrasive rolling effect studied by molecular dynamics simulation

Abrasive Rolling Effects On Material Removal And Surface Finish In Chemical Mechanical Polishing Analyzed By Molecular Dynamics Simulation

Study on Mechanism for Material Removal and Surface Generation by Molecular Dynamics Simulation in Abrasive Processes

Investigation of Material Removal Mechanism of Silicon Wafer in the Chemical Mechanical Polishing Process Using Molecular Dynamics Simulation Method

Mechanical removal of SiC by multi-abrasive particles in fixed abrasive polishing using molecular dynamics simulation

Material removal and wear mechanism in abrasive polishing of SiO2/SiC using molecular dynamics

Monoatomic Layer Removal Mechanism in Chemical Mechanical Polishing Process: A Molecular Dynamics Study

A Model for Mechanical Wear and Abrasive Particle Adhesion during the Chemical Mechanical Polishing Process

Mechanical Model of Single Abrasive During Chemical Mechanical Polishing: Molecular Dynamics Simulation

Nano Particles’ Behavior in Non-Newtonian Slurry in Mechanical Process of CMP

A Molecular Dynamics Study of Silica Cluster Cutting Single Crystalline Silicon Asperity

Reactive Molecular Dynamics Simulation of Si Chemical Mechanical Polishing Process

Atomic Simulations of Deformation Mechanism of 3C-SiC Polishing Process with a Rolling Abrasive

Impact of multiple abrasive particles on surface properties of SiC: A molecular dynamics simulation study

Simulation of abrasive polishing process of single crystal silicon based on molecular dynamics

Influence of Abrasive Shape on the Abrasion and Phase Transformation of Monocrystalline Silicon

Nano Particles’ Behavior in Chemical Mechanical Polishing With the Effect of Non-Newtonian Properties of Slurry

Surface Morphology Evolution during Chemical Mechanical Polishing Based on Microscale Material Removal Modeling for Monocrystalline Silicon

Molecular dynamics simulation of nano-polishing of single crystal silicon on non-continuous surface

Grinding and lapping induced surface integrity of silicon wafers and its effect on chemical mechanical polishing

High Pressure on Asperity Surface Caused by Nano Particles’ Behavior in Non-Newtonian Slurries