Abstract:Phillips Cr/silica catalyst is industrially important in ethylene polymerization. The high-resolution solid state H-1 MAS NMR and Si-29 CP/MAS NMR allowed the identification of the type and amount of silanols: geminal vs. single (isolated and vicinal) silanols on Phillips catalysts calcined at different temperatures, which were compared with those of the bare silica gel counterparts. The residual silanols on the catalyst and silica gel samples were all decreased with increasing calcination temperatures from 120 to 800 degrees C. For the catalysts treated at temperatures lower than 300 degrees C, the amount of residual silanol groups were much lower than those of the silica gel counterparts. It suggested that the chromium species were mainly grafted on the silica gel through esterification reaction with surface silanols below 300 degrees C. The geminal silanols almost disappeared on the catalysts at 120 degrees C, while that for the silica gel occurred at 300 degrees C. Further increasing the calcination temperatures from 300 to 800 degrees C, the amount of single silanols were slower decreased for the catalysts than that for the silica gel samples. It indicated that the presence of the grafted chromate species obstructed further removal of the residual single silanols. The role of silanols on the formation of surface chromate species on the well-defined polyoligomericsilsesquioxane (POSS) models containing various types of silanols was theoretically studied by density functional theory (DFT) method. It was shown that one silanol of the geminal pair and another adjacent single silanol was the most thermodynamically favored for grafting chromium species. The priority of the reaction between chromium species and different types of surface silanol groups during calcination for Phillips catalysts were experimentally and theoretically elucidated for the first time.

Synthesis, characterization and catalytic properties of Cr-containing silica gel

Preparation and Analysis of Transition Metal Chromium-Doped Mesoporous Silica

Effect of synthesis parameters on the chromium content and catalytic activities of mesoporous Cr-MSU-x prepared under acidic conditions

Direct Synthesis of Cr-MCM-48-like Large Pore Mesoporous Silica

Synthesis of porous silica gel and study on the adsorption of cerium

Synthesis and characterization of mesoporous and amorphous silica modified with silica-organo-sulfogroups

High-resolution 29 Si CP/MAS Solid State NMR Spectroscopy and DFT Investigation on the Role of Geminal and Single Silanols in Grafting Chromium Species over Phillips Cr/silica Catalyst

Removal of Cr(III, VI) by Quaternary Ammonium and Quaternary Phosphonium Ionic Liquids Functionalized Silica Materials

Synthesis and characterization of high hydrothermally stable Cr-MCM-48

Spectroscopic and Structural Characterization of Cr(II)/SiO2 Active Site Precursors in Model Phillips Polymerization Catalysts

Synthesis and characterization of amorphous silica-alumina with enhanced acidity and its application in hydro-isomerization/cracking

Kinetic Study and Catalytic Activity of Cr3+ Catalyst Supported on Calcium Silicate Hydrates for VOC Oxidation

Synthesis, Characterization of Cr-Hms and the Application in Catalytic Oxidation

Preparation and conductibility of silica gels composited with undecatungstochromoferrous heteropoly acid

Synthesis of SiC precursors by sol-gel process

Supporting Mechanism of Non‐toxic Chromium (III) Acetate on Silica for Preparation of Phillips Ethylene Polymerization Catalysts

Synthesis and oxidation behavior of chromium silicide (Cr3Si) nanorods

Synthesis of Mesoporous Zirconium-Containing Silicates and Their Application for Catalytic Asymmetric Addition of Diethylzinc to Aldehydes

Reactive Condensation of Cr Vapor on Aluminosilicates Containing Alkaline Oxides

The Synthesis, Characterization and Application of Ag–SiO2–Al2O3 Sol–gel Composites

Silica Hybrid Xerogel Incorporating (R)-2,2 '-Bis(Methoxyethoxymethyloxy)-1,1 '-Binaphthyl Unit Via Sol-Gel Process