Abstract:Herein a semi-aliphatic diamine 4,4 '-(cyclohexylmethylene)bis(2-methylaniline) (CHMBMA) with a pendant cyclohexyl and two ortho-substituted methyl groups is synthesized from o-toluidine and cyclohexanecarbaldehyde by Mannich and rearrangement reactions. Then CHMBMA is polycondensed with five commercial aromatic dianhydrides by the high-temperature one-step method with the thermal imidization to produce a series of polyimides (PIs, PI-H(1-5)). The weight-averaged molecular weights (M (w)s) of PI-H(1-5) are in the range from 9.08 x 10(4) to 27.48 x 10(4) g mol(-1) with the polydispersity indices (PDI) from 3.29 to 6.13 by gel permeation chromatography (GPC) measurement. They are soluble in common organic solvents (such as THF, CHCl3 etc.) and can form transparent, tough films with light-color (Thickness: 20-26 mu m) by the solution-casting method. The light transmittance of them is above 80% in the visible range from 400 to 760 nm. They exhibit excellent mechanical properties with tensile strength from 72.2 to 97.06 MPa and tensile modulus from 0.9 to 1.9 GPa. Furthermore, they also display low water absorption rates (<2.5%), good thermal stability (5% weight loss temperatures (T (5%)) in the range from 466 to 480 degrees C under N-2 atmosphere and high glass transition temperatures (T (g)s >= 319 degrees C). As comparison, we also synthesize these PIs (PI-L(1-5)) by the low-temperature two-step method with the chemical imidization. The M (w)s of PI-L(1-5) are lower than those of PI-H(1-5), but the film color of PI-L(1-5) is relatively lighter than the corresponding one of PI-H(1-5). In summary, the introduction of cyclohexyl and ortho-substituted methyl groups into the backbone can improve the solubility of PIs and the transparency of their corresponding films without reducing their T (g)s.

Synthesis and characterization of novel semi-alicyclic polyimides from methyl-substituted tetralin dianhydride and aromatic diamines

Organosoluble semi-alicyclic polyimides derived from 3,4-dicarboxy-1,2,3,4- tetrahydro-6-tert-butyl-1-naphthalene succinic dianhydride and aromatic diamines: Synthesis, characterization and thermal degradation investigation

Synthesis and Characterization of Polyimides from 4,4′-(3-(tert-butyl)-4-aminophenoxy)diphenyl Ether

Soluble Polyimides Derived from a Novel Aromatic Diamine Containing an Imidazole Unit and Trifluoromethyl Groups

Synthesis and characterization of highly refractive polyimides from 4,4′-thiobis[(p-phenylenesulfanyl)aniline] and various aromatic tetracarboxylic dianhydrides

Study on Syntheses and Properties of Some Novel Polyimides Containing Bisthiazole Rings

Synthesis of Novel Biphenyl‐fused Alicyclic Tetracarboxylic Dianhydride and Its Performance in Thermostable and Transparent Colorless Polyimides

Synthesis and properties of fluorinated polyimides from 1,1-bis(4-amino-3,5-dimethylphenyl)-1-(3,4,5-trifluorophenyl)-2,2,2-trifluoroethane and various aromatic dianhydrides

Microwave-assisted Synthesis of High Thermal Stability and Colourless Polyimides Containing Pyridine

Synthesis and Properties of Cost-Effective Light-Color and Highly Transparent Polyimide Films from Fluorine-Containing Tetralin Dianhydride and Aromatic Diamines

Synthesis and Characterization of Soluble Polyimides Containing Tert-Butyl, Ether Linkages and Bisphenol A Units

Synthesis and Properties of Soluble Transparent Polyimides Containing Tert-Butyl and Isobutyl Groups

Organo-Soluble Fluorinated Polyimides Derived from Bis-Trifluoromethyl-Substituted Aromatic Diamines and Various Aromatic Dianhydrides

Synthesis and properties of polyimides from a diamine containing side diphenylphosphine oxide and trifluoromethyl groups

Synthesis and Characterization of Thioether and Pyridine-Bridged Aromatic Polyimides with High Refractive Indices and High Glass Transition Temperatures

High Refractive Index Polyimides Derived from 2,7-Bis(4-aminophenylenesulfanyl)thianthrene and Aromatic Dianhydrides

Soluble And Transparent Polyimides With High T-G S From A New Semi-Aliphatic Diamine With Cyclohexyl And Ortho-Methyl Groups

Novel Polyfluorinated Polyimides Derived from Α,α-Bis(4-amino-3,5-difluorophenyl)phenylmethane and Aromatic Dianhydrides: Synthesis and Characterization

Synthesis and Properties of Novel Polytriazoleimides Derived from 1,2,3‐triazole‐containing Diamines and Aromatic Dianhydrides

Synthesis and Characterization of Asymmetric Polyimides with High Transparency

Synthesis and Properties of Sulfonyl-Substituted Polyimides with High Refractive Indices and High Transparency