Abstract:Purpose In summary, it can be found that the current research on the simulation of natural atmospheric dry–wet alternating accelerated corrosion mainly focused on the study of electrochemical corrosion process and the study of corrosion rate; the micro-pre-corrosion mechanism of materials in this environment, especially for materials. The specific effects of fatigue and fracture performance still lack detailed research. Accordingly, this study aims to more realistically simulate the effect of natural atmospheric corrosion environment on the corrosion resistance and fatigue performance of aircraft skin. Design/methodology/approach In this study, the uniaxial strain control method was used to test the fatigue performance of pre-corrosion samples under simulated natural atmospheric corrosion using MTS809 tensile-torque composite fatigue machine. Scanning electron microscopy, X-ray energy spectrum analysis, atomic force microscopy and X-ray diffraction analysis were used. Fatigue fracture, corrosion morphology and corrosion products were analyzed. Findings The results show that the deep corrosion pit caused by pre-corrosion environment leads to multi-source initiation of crack; the fatigue life of pre-corroded sample decreases by about one-half, chloride ion invades the material and promotes intergranular corrosion; life prediction results show that the natural atmospheric corrosive environment mainly affects the plastic term in the Manson–Coffin formula resulting in a decrease in fatigue life. Originality/value Innovative experimental schemes and materials are used and the test temperature and relative humidity are strictly controlled. The corrosion failure mechanism of 2A70-T6 aluminum alloy under alternating wet and dry accelerated corrosion environment and its influence on fatigue behavior were obtained.

Changes in surface morphology and work function caused by corrosion in aluminum alloys

Influence of surface morphology on corrosion and electronic behavior

Corrosion behaviors and galvanic studies of microarc oxidation films on Al–Zn–Mg–Cu alloy

Revealing Crack Propagation and Mechanical Behavior of Corroded Aluminum Alloys

Impact of Corrosion on the Degradation of the Mechanical Properties of 2195 and 2297 Al Alloys in the Marine Environment

Dependence of electron work function of Al-Mg alloys on surface structures and relative humidity

Corrosion Damage Evolution and Residual Strength of Corroded Aluminum Alloys

Influence of Microstructure and Microelements on Corrosion Structure of Aluminum Foil

In Situ Atomic Force Microscopy Observations of the Corrosion Behavior of Aluminum‐Copper Alloys

Low-cycle Fatigue Behavior and Corrosion Mechanism of Pre-Corroded 2A70-T6 Aluminum Alloy

Study on the Influence of Surface Treatment Process on the Corrosion Resistance of Aluminum Alloy Profile Coating

Variations of work function and corrosion behaviors of deformed copper surfaces

Experimental Investigation of Various Corroded Metal Materials Used in Building Structures

The Corrosion Phenomena of the 5 A06 Aluminum Alloy after Being Coated with Graphite

Electrochemical Corrosion Behavior of Microarc Oxidation Coatings on Friction Stir Weld Joints of 5083 Aluminum Alloy

Corrosion property of Al alloys subjected to surface severe plastic deformation: a review

Superhydrophobic aluminum alloy surface: Fabrication, structure, and corrosion resistance

Exfoliation Corrosion Behavior of 7050-T6 Aluminum Alloy Treated with Various Quench Transfer Time

Exfoliation Corrosion of Aluminum Alloy AA7075 Examined by Electrochemical Impedance Spectroscopy

A Transmission Electron Microscopy Study of Microscopic Causes for Localized-Corrosion Morphology Variations in the AA7055 Al Alloy

Computational and Experimental Insights into the Role of Acidic Molecules on the Corrosion Behavior on 7A46 Aluminum Alloy