Abstract:Lock-in thermography which is an active thermography technique for NDT is based on propagation and reflection of thermal waves which are launched from the surface into the inspected component by absorption of modulated radiation. Phase angle images obtained by superposition of the initial thermal wave and its internal reflection display hidden thermal structures down to a certain depth below surface. Defects are found by comparing the observed features with expected features provided by an intact reference sample. This technique has been widely applied to detect the defection of many materials and structure in aerospace and automotive industry. In this study, the law of sine modulated lamp was used for active heat source into the CFRP plate sample. The theory of thermal wave transmission and reflection were studied deeply by finite difference method and thermal-electronic equaling model. The thermal wave image sequences were collected with infrared camera, and the program of IR Lock-in thermography was developed by Visual C++ development platform. So that the phase image was extracted between the reflection thermal wave and reference ones on the surface of sample by means of correlation algorithms or Fourier transform. The experimental results show that the simulation is closed to the experimental ones. The defect character is detected clearly, and the relation between phase and defect depth is obtained by lock-in thermography, this relation can be used to measure the defect depth. Lock-in thermography is an effective tool to detect the Debonding defect of CFRP materials.

Experimental study of inspection on a metal plate with defect using ultrasound lock-in thermographic technique

Detecting features of defect metal based on laser ultrasonic technique

Ultrasonic Guided Wave-Based Circumferential Scanning of Plates Using a Synthetic Aperture Focusing Technique

Quantitative Detection of Defect Using Ultrasound Infrared Lock-In Thermography

Processing thermal image sequences for defect detection based on ultrasound lock-in thermography

Subsurface Interfacial Defects of Metal Materials Testing Using Ultrasound Infrared Lock-In Thermography

Testing surface crack defects of sheet metal with ultrasonic lock-in thermography

Detection and Quantification of Damage in Metallic Structures by Laser-Generated Ultrasonics

Detection of Contacting Interface-Type Defects Using Ultrasound Lock-in Thermography

Research on the Quantitative Analysis of Subsurface Defects for Nondestructive Testing by Ultrasound Lock-In Thermography

Effect of Modulation Frequency on Detecting Metal Materials with Microcracks Based on Ultrasound Infrared Lock-In Thermography

A Defect Detection Method for the Surface of Metal Materials Based on an Adaptive Ultrasound Pulse Excitation Device and Infrared Thermal Imaging Technology

Research on the Quantitative Analysis of Subsurface Defects for Non-Destructive Testing by Lock-In Thermography

Study of inspection on metal sheet with subsurface defects using linear frequency modulated ultrasound excitation thermal-wave imaging (LFM-UTWI)

Research on Detection of Small Defects of Aluminum Plates Based on Electromagnetic Ultrasonic Lamb Wave

Numerical Simulation of Metal Defect Detection Based on Laser Ultrasound

Characteristic and Recognition of Ultrasonic TOED Signal and Image for Planar Defect

Metal defects sizing and detection under thick coating using microwave NDT

Fusion Model of Inductive Thermography and Ultrasound for Nondestructive Testing

Research on CFRP Materials Nondestructive Testing by IR Lock-in Thermography

Thermal Wave Detection and Defect Depth Measurement Based on Lock-in Thermography