Abstract:Two TiCl4/Di/MgCl2 type supported Ziegler-Natta catalysts were prepared by loading dibutylphthalate or dicyclopentyldimethoxysilane (DCPDMS) (internal donor, Di) and TiCl4 on activated -MgCl2 in sequence, and a blank catalyst was prepared by loading TiCl4 on the same -MgCl2 without adding Di. These catalysts have similar specific surface area and pore size distribution, thus form a suitable base for comparative studies. Propylene polymerization with the catalysts was conducted in n-heptane slurry using triethylaluminum (TEA) as cocatalyst, and the effects of Di as well as De (external donor, in this work it was DCPDMS) on the number of active centers, the distribution of active centers among three polypropylene (PP) fractions (isotactic, medium isotactic, and atactic PP chains), and chain propagation rate constants of the PP fractions were studied by counting the number of active centers in the PP fractions using a method based on selective quench-labeling of the propagation chains by 2-thiophenecarbonyl chloride. When De was not added in the polymerization, introducing a phthalate type Di in the catalyst evidently changed the active center distribution by enhancing the proportion of active centers producing isotactic PP (iPP) (Ci), but scarcely changed reactivities of the three groups of active centers forming the three fractions. When the De was added in the polymerization system with TiCl4/phthalate/MgCl2 catalyst, further shifting of active center distribution in favor of Ci took place, meanwhile reactivities of the three groups of active centers also remarkably changed in favor of Ci. Mutual effects of these changes led to overwhelming dominance of iPP production in the TiCl4/Di/MgCl2-TEA/De system (Di=phthalate, De=alkoxysilane). In contrast, though using alkoxysilane as Di also caused shifting of active center distribution in favor of Ci when De was not added, addition of alkoxysilane De caused reverse shifting of active center distribution in favor of those producing PP of lower stereoregularity. This unfavorable change largely counteracted the reactivity changes in favor of Ci caused by the De, rendering the catalytic system rather poor isospecificity. (c) 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018, 135, 46605.

Propylene Polymerization with Α-Keto-β-diimine Initiators Proceeds Via Enantiomorphic Site Control

ETHYLENE POLYMERIZATIONS CATALYZED BY Α-Diimine COMPLEXES WITH DIFFERENT SUBSTITUENTS ON LIGAND BACKBONE

Ethylene polymerization with metallocene/late transition metal combined catalysts

Microtacticity of Polypropylene Fractions Produced by Different Active Sites of Heterogeneous Ziegler-Natta Catalyst

Characterization of isotactic polypropylene prepared with dimethylsilyl bis(1-indenyl)zirconium dichloride supported on methylaluminoxane pretreated silica

Investigation of the stereodefect distribution and conformational behavior of isotactic polypropylene polymerized with different Ziegler-Natta catalysts

Temperature rising elution fractionation of polypropylene produced by heterogeneous Ziegler-Natta catalysts

Relationship Between Peroxide Initiators and Properties of Styrene Grafted Polypropylene Via Reactive Extrusion

Combination of 8‐aminoquinoline Nickel Dichloride and Cp2ZrCl2 Catalysts for Ethylene Polymerization

Synthesis and Characterization of a Model Carbon-Chain Polymer Substituted by Two Esters on Every Third Atom Via Anionic Ringopening Polymerization of a Cyclopropane-1,1-dicarboxylate

Mechanism Of Internal And External Electron Donor Effects On Propylene Polymerization With Mgcl2-Supported Ziegler-Natta Catalyst: New Evidences Based On Active Center Counting

Polymerization Kinetics of Propylene with the MgCl2-Supported Ziegler-Natta Catalysts—Active Centers with Different Tacticity and Fragmentation of the Catalyst

Amorphous Elastomeric Ultra-High Molar Mass Polypropylene in High Yield by Half-Titanocene Catalysts

Propylene Polymerization to High Molecular Weight Atactic Polypropylene and Copolymerization with 1-Hexene Using Monocyclopentadienyl Titanium Catalysts.

Structure and Properties of Ethylene/propylene Copolymers Synthesized with Bis(2,4,7-Trimethylindenyl)zirconium Dichloride Activated by Methyl Aluminoxanes Containing Different Amount of Trimethylaluminum

Synthesis of High-Molecular-Weight Polypropylene Elastomer by Propylene Polymerization Using α-Diimine Nickel Catalysts

Microstructure of Ethylene/propylene Random Copolymers Prepared by a Fluorinated Bis(phenoxy-Imine) Ti Catalyst

C-2-Symmetric Ni(Ii) Alpha-Diimines Featuring Cumyl-Derived Ligands: Synthesis Of Improved Elastomeric Regioblock Polypropylenes

Fluorinated Bis(phenoxyketimine)titanium Complexes for the Living, Isoselective Polymerization of Propylene: Multiblock Isotactic Polypropylene Copolymers Via Sequential Monomer Addition.

Crystallization Behavior of a Propylene-1-butene Random Copolymer in Its Α and Γ Modifications

The Effect of Tunable Modification Parameters on the Structure and Properties of Polypropylene with Cyclotrimerization Surface of Isocyanates