Abstract:The heat transfer and solidification characteristics significantly affect the solidified microstructure of direct laser deposited coatings. In this work, a Ti-based coating was prepared on the Ti811 alloy by coaxial laser cladding to reveal the in-situ synthesis mechanism of the reinforcing phase and enhance its mechanical properties. The heat transfer evolution and solidification characteristics of the molten pool were investigated by numerical simulations and experiments. The phase composition, microstructure, interface characteristics, nano-hardness, and tribological properties of the deposited coating were studied. The results showed that the sufficient temperature of the molten pool ensured the formation of a deposited coating. The Marangoni convection of the molten pool facilitated the powder particles melting process as well as the uniformity of the reinforcing phase distribution. In addition, the temperature gradient and solidification rate at the upper of the solidified interface increased 2.27 and 29 times, respectively, compared to those at the bottom of the solidified interface. Thermodynamic and simulation results determined the precipitation sequence and mechanism of the phases. Due to the solid solution strengthening, dispersion strengthening effects, and robust interfacial bonding between phases, the nano-hardness of the deposited coating was 2.5 times higher than the substrate. Compared to the Ti811 alloy, the friction coefficient of the coating was reduced by around 30%. The tribological properties of the deposited coating dramatically improved, and the wear mechanism was mainly abrasive wear. This work theoretically and experimentally revealed the primary mechanism of in-situ enhancement to protect titanium alloys.

Microstructure and Electrochemical Behavior of Laser Cladded HA Coating on Pure Titanium TA2

Microstructure, High-Temperature Wear Resistance, and Corrosion Resistance of Laser Cladded Co-Based Coating

Microstructure and wear resistance of laser clad composite coating on TC4 titanium alloy surface

Microstructure and properties of pure titanium coating on Ti-6Al-4V alloy by laser cladding

Cladding Bio-Ceramic Coatings of Low SiO2-HA on the Surface of Titanium Alloy

Stepwise Laser Cladding of TiNbZr and TiTaZr Medium-Entropy Alloys on Pure Ti Substrate

Investigation into corrosion and wear behaviors of laser-clad coatings on Ti6Al4V

Microstructure and Wear Resistance of Ti5Si3/Ti3Al Composite Coatings Prepared by Laser Cladding on TA2 Titanium Alloy

Research on microstructure and properties of Ti-based coating prepared by laser cladding on titanium alloy: simulation and experiment

Microstructure and Properties of CoCrFeNiMnTix High-Entropy Alloy Coated by Laser Cladding

Corrosion, wear and biocompatibility of hydroxyapatite bio-functionally graded coating on titanium alloy surface prepared by laser cladding

In-situ Synthesized TiC/TiB Ceramic Particle Composite Coating by Laser Cladding on TC4 Titanium Alloy

The effect of Ta alloyed state on the corrosion resistance of TC4 surface laser cladding high entropy alloy

Microstructures and Properties of Laser Cladding Al-TiC-CeO₂ Composite Coatings

Effect of Electrically Assisted Preheating on Microstructure and Properties of Laser-Cladded Co-Based Coating on CP-Ti Alloy Substrate

Microstructure and wear properties of TiCN/Ti coatings on titanium alloy by laser cladding

Characterization of Hydroxyapatite and Titanium Coatings Sputtered on Ti-6Al-4V Substrate.

Microstructure and Corrosion Behavior of Ti-Nb Coatings on NiTi Substrate Fabricated by Laser Cladding

Microstructure and hardness characteristic of in-situ synthesized TiB coating by laser cladding on TC4 titanium alloy

Microstructure regulation and performance of titanium alloy coating with Ni interlayer on the surface of mild steel by laser cladding

Microstructure characteristics of titanium aluminide matrix composite coatings made by laser cladding on titanium alloy substrate