Aggregation Induced Emission for the Recognition of Latent Fingerprints.

Yan Li,Linru Xu,Bin Su

DOI: https://doi.org/10.1039/c2cc30553d

IF: 4.9

2012-01-01

Chemical Communications

Abstract:The aggregation-induced emission of tetraphenylethene was explored for enhancing the visualization of latent fingerprints on wet non-porous surfaces.

What problem does this paper attempt to address?

Enhancing the Visualization of Latent Fingerprints by Aggregation Induced Emission of Siloles

Linru Xu,Yan Li,Shuhong Li,Rongrong Hu,Anjun Qin,Ben Zhong Tang,Bin Su

DOI: https://doi.org/10.1039/c3an02367b

2014-01-01

In Analysis

Abstract:Aggregation-induced emission was explored for the visual enhancement of latent fingerprints deposited on wet non-porous surfaces.
Aggregation-Induced Emission Luminogens for Latent Fingerprint Detection

Sonali Bera,Abishake Selvakumaraswamy,Biswa Prakash Nayak,Puja Prasad

DOI: https://doi.org/10.1039/d4cc02026j

IF: 4.9

2024-07-20

Chemical Communications

Abstract:For over a century, fingerprints have served as a pivotal tool in identification owing to their enduring characteristics and easily apparent features, particularly in the realm of criminal investigations. Latent fingerprints (LFP) are "invisible fingerprints" that are most commonly available at crime scenes and require a rapid, selective, sensitive, and convenient method for detection. However, existing fingerprint development techniques harbour limitations, prompting the exploration of novel approaches that prioritize investigator safety and environmental sustainability. Leveraging the unique photophysical properties of aggregation-induced emission luminogens (AIEgens) emerges as a promising candidate for on-site analysis of LFP visualization. In this highlight article, we have presented a comparative analysis of various AIEgens (organic compounds, metal complexes, nanoparticles, and polymers) for the development and detection of LFP. Through this examination, insights into the efficiency and potential applications of AIE-based fingerprint development techniques are illuminated. In addition, several strategies have been proposed for circumventing the limitations of existing AIEgens. We hope that this highlight article will encourage more researchers to investigate AIEgens in LFP detection which could contribute to forensic science.

chemistry, multidisciplinary
Aggregation-Induced Emissions of Tetraphenylethene Derivatives and Their Utilities As Chemical Vapor Sensors and in Organic Light-Emitting Diodes

Yongqiang Dong,Jacky W. Y. Lam,Anjun Qin,Jianzhao Liu,Zhen Li,Ben Zhong Tang

DOI: https://doi.org/10.1063/1.2753723

IF: 4

2007-01-01

Applied Physics Letters

Abstract:Nonemissive tetraphenylethene (TPE) 1 and its diphenylated derivative 2 were induced to emit intensely by aggregate formation. Crystalline aggregates of the dyes emitted bluer lights than their amorphous counterparts. The emissions of the TPE dyes could be switched off and on continuously and reversibly by wetting and dewetting with solvent vapors, respectively, manifesting their ability to optically sense volatile organic compounds. The light-emitting diodes fabricated from 1 and 2 were turned on at ∼2.9 and ∼5V and emitted blue lights with maximum luminance of ∼1800 and ∼11000cd∕m2, respectively.
Real-Time Fluorescence In Situ Visualization of Latent Fingerprints Exceeding Level 3 Details Based on Aggregation-Induced Emission

Ya-Long Wang,Chong Li,Hong-Qing Qu,Cheng Fan,Peng-Ju Zhao,Rui Tian,Ming-Qiang Zhu

DOI: https://doi.org/10.1021/jacs.0c00124

IF: 15

2020-03-30

Journal of the American Chemical Society

Abstract:A water-soluble probe, TPA-1OH, with aggregation-induced emission activity is synthesized and used for expedient real-time fluorescence <i>in situ</i> visualization of latent fingerprints (LFPs). A TPA-1OH aqueous solution exhibits nonfluorescence in pure water while strong fluorescence upon molecular aggregation induced by addition of poor solvent. Fluorescence images of LFPs on a variety of substrates, including rough surfaces such as walls, bricks, and paper, are developed under 405 nm light, by soaking in or spraying with a TPA-1OH aqueous solution (30 μM) without any necessity of organic cosolvents and post-treatment steps. The probe is noncytotoxic at a concentration lower than 50 μM. The development process of LFPs is demonstrated by real-time fluorescence <i>in situ</i> imaging. The exponential relationship between the relative fluorescence intensity and time is deduced from the fitting curve. The LFP images developed by TPA-1OH are evident and intact enough to allow that the level 1-3 details are displayed and analyzed. Noteworthily, the level 3 details of LFPs such as the fingerprint ridge width and the characteristics of the sweat pores are evidently visible under fluorescence microscopy. Even the nanoscopic details exceeding level 3 are visualized under super-resolution microscopy with sub-50 nm optical resolution.

chemistry, multidisciplinary
Aggregation-enhanced emissions of intramolecular excimers in disubstituted polyacetylenes.

Anjun Qin,Cathy K W Jim,Youhong Tang,Jacky W Y Lam,Jianzhao Liu,Faisal Mahtab,Ping Gao,Ben Zhong Tang

DOI: https://doi.org/10.1021/jp800296t

2008-01-01

Abstract:Whereas chain aggregation commonly quenches light emission of conjugated polymers, we here report a phenomenon of aggregation-induced emission enhancement (AIEE): luminescence of polyacetylenes is dramatically boosted by aggregate formation. Upon photoexcitation, poly(1-phenyl-1-alkyne)s and poly(diphenylacetylene)s emit blue and green lights, respectively, in dilute THF solutions. The polymers become more emissive when their chains are induced to aggregate by adding water into their THF solutions. The polymer emissions are also enhanced by increasing concentration and decreasing temperature. Lifetime measurements reveal that the excited species of the polymers become longer-lived in the aggregates. Conformational simulations suggest that the polymer chains contain n = 3 repeat units that facilitate the formation of intramolecular excimers. The AIEE effects of the polymers are rationalized to be caused by the restrictions of their intramolecular rotations by the aggregate formation.
Single-molecule multi-target fluorescent imaging for latent fingerprints based on aggregation-induced emission

Rui Tian,Qi Yu,Li-Jun Mei,Feng-Yu Zhu,Qi Qin,Rongliang Ma,Ya-Long Wang,Chong Li,Ming-Qiang Zhu

DOI: https://doi.org/10.1016/j.snb.2023.134634

IF: 9.221

2023-09-20

Sensors and Actuators B Chemical

Abstract:Existing latent fingerprint developers achieve marvelous progress during the past decades. However, most of these methods mainly consider single target substance, which may face difficulties in latent fingerprint imaging when the corresponding substance is absent from latent fingerprint traces. To alleviate this issue, we propose a novel single-molecule multi-target green fluorescent probe , TPE-NI-NHS, which could target both lipids and amino acids through physical adsorption and chemically bonding under mild conditions, respectively. Specifically, tetraphenylethylene and active ester group in TPE-NI-NHS are connected at two ends of the naphthalimide core, which provide perfect aggregation-induced emission, accurate and quick reaction with amino acids, lipophilic properties , and green fluorescence emission. As expected, TPE-NI-NHS achieves green fluorescent imaging for latent fingerprints contained different contents of lipids and amino acids with high quality, high sensitivity, and high contrast under mild conditions. In summary, TPE-NI-NHS developer provides multiple targeting features, novel imaging principles and mild imaging process to latent fingerprint detections.

chemistry, analytical,electrochemistry,instruments & instrumentation
Bioimaging: Biocompatible Nanoparticles with Aggregation‐Induced Emission Characteristics as Far‐Red/Near‐Infrared Fluorescent Bioprobes for in Vitro and In Vivo Imaging Applications (Adv. Funct. Mater. 4/2012)

wei qin,dan ding,jianzhao liu,wang zhang yuan,yong hu,bin liu,ben zhong tang

DOI: https://doi.org/10.1002/adfm.201290021

IF: 19

2012-01-01

Advanced Functional Materials

Abstract:On page 771, Bin Liu, Ben Zhong Tang, and co-workers report the synthesis of 2-(2,6-bis((E)-4-(phenyl(4′-(1,2,2-triphenylvinyl)-[1,1′-biphenyl]-4-yl)amino)styryl)-4Hpyran-4-ylidene)malononitrile (TPE-TPA-DCM), which has an aggregation-induced emission (AIE) feature. Further formulation of TPE-TPA-DCM using bovine serum albumin (BSA) as the polymer matrix allows for successful in vitro and in vivo farred/near-infrared (FR/NIR) bioimaging.
Enhancing the Visualization of Latent Fingerprints by Electrochemiluminescence of Rubrene

Yan Li,Linru Xu,Yayun He,Bin Su

DOI: https://doi.org/10.1016/j.elecom.2013.04.033

IF: 5.443

2013-01-01

Electrochemistry Communications

Abstract:We report how electrochemiluminescence (ECL) of rubrene can be utilized for enhancing the visualization of latent fingerprints in two different modes. The enhancement arises from the spatially selective ECL generation either from the substrate surface uncovered by the fingerprint or the fingerprint itself, designated negative or positive imaging mode, respectively. The negative mode is performed directly in an electrolyte solution containing rubrene and co-reactant. Given that organic residues in the fingerprint deposit make the underlying surface electrochemically inert or less active, ECL reaction occurs only on the surface untouched by the fingertip, generating a negative impression with a dark ridge pattern against the illuminated background. The positive imaging mode is based on the preferential adsorption of rubrene aggregates to the ridge materials via physical attraction; then the fingerprint can glow via ECL reaction in a solution containing co-reactant under an appropriate applied potential.
High-definition and robust visualization of latent fingerprints utilizing ultrabright aggregation-induced emission of iridium developer

Ling Di,Yang Xing,Zhanxu Yang,Chun Li,Zongbao Yu,Xiaoning Wang,Zhengqiang Xia

DOI: https://doi.org/10.1016/j.talanta.2023.124775

IF: 6.1

2023-06-08

Talanta

Abstract:Creation of AIEgens with high brightness is compactly related to acquiring optimum AIE capabilities and still faces challenges. This study proposes an ingenious structurally regulative approach for preparing ultrabright AIEgens, taking iridium complexes as the model. The incremental rotational activity of substituents obtained by fine adjustment of the stereoscopic configuration efficaciously activates the AIE of iridium complexes and synchronously imparts high-brightness luminescence. Subsequently, benefitting from the ultrabright AIE, high-resolution visualization of latent fingerprints (LFPs) is achieved on diverse substrates by transient immersion in a solution of the AIE-active iridium complex (Ir3) for 60 s. The LFPs stained by Ir3 are integral and distinct enough to possess level 1–3 detail features, which allow precisely realizing personal identification. The LFP photograph emerges inconspicuous attenuation of contrast when aged under ambient light for 10 days and then being continuously irradiated with high-power ultraviolet light for 1 h, reflecting extraordinary aging resistance. Notably, the ultrabright AIE of Ir3 with room-temperature phosphorescence feature successfully achieves enhanced visualization of local fingerprint details with ultrahigh contrast. This LFP visualization protocol based on the ultrabright AIEgens is practical and provides a reliable solution for forensic investigations in actual scenarios.

chemistry, analytical
Imaging Latent Fingerprints by Electrochemiluminescence

Linru Xu,Yan Li,Suozhu Wu,Xianghong Liu,Bin Su

DOI: https://doi.org/10.1002/anie.201203815

2012-01-01

Angewandte Chemie

Abstract:Behandelt man eine Elektrodenoberfläche, auf der sich ein latenter Fingerabdruck befindet, mit einem Elektrochemilumineszenz (ECL) erzeugenden Luminophor, so geben die Oberflächenbereiche, die nicht vom Fingerabdruck bedeckt sind, eine ECL ab, und man erhält ein Negativbild (links; ITO=Indiumzinnoxid). Wird der Fingerabdruck aber mit Luminophor vorbehandelt, so erhält man ein ECL-Positivbild (rechts).
Synthesis of D-A typed AIE luminogens in isomeric architecture and their application in latent fingerprints imaging

Peijuan Zhang,Qifei Shen,Yu Zhou,Fengyi He,Bo Zhao,Zhi Wang,Ruohan Xu,Yanzi Xu,Zhiwei Yang,Lingjie Meng,Dongfeng Dang

DOI: https://doi.org/10.1016/j.cclet.2022.107910

IF: 9.1

2022-10-01

Chinese Chemical Letters

Abstract:Among the emitters in powder dusting to visualize the latent fingerprints (LFPs), aggregation-induced emission luminogens (AIEgens) are well employed for their high brightness and resistance to photo-bleaching. However, the serious background interference and low resolution still limit their fast development. Therefore, to further enhance the signal-to-noise ratio in LFPs imaging, especially to improve the analysis for level 3 details, donor-acceptor (D-A) typed AIEgens of DTPA-2,3-P, DTPA-2,5-P and DTPA-2,6-P are designed here. It is observed that strong emission covering from 450 nm to 650 nm can be obtained for all these molecules, especially that a high PLQY value of 10.06% in solids is achieved in DTPA-2,3-P. This is much higher than that of the other two cases (0.80% and 0.51%). By utilizing the DTPA-2,3-P in powder dusting, fluorescence imaging of LFPs can be clearly captured on both smooth and rough substrates. Moreover, confocal laser scanning microscope (CLSM) enables us to achieve high-resolution LFPs imaging in both 2D and 3D views, providing more detailed information of fingerprints pores in width, distance, distribution, and shapes. The results here demonstrate that highly emissive AIEgen of DTPA-2,3-P could be an excellent candidate for the visualization of fingerprints, thus providing the potential application in criminal investigation in the future.

chemistry, multidisciplinary
AIEE—Active Green Fluorescence Imaging Technique for Latent Fingerprint Application

Palani Purushothaman,S. Nishanthi,B. Induja,P. S. Umabharathi,M. Sethupathi,Subramanian Karpagam

DOI: https://doi.org/10.1002/bio.70004

IF: 2.613

2024-10-27

Luminescence

Abstract:An efficient, less cytotoxic, environment friendly, green aggregation‐induced emission enhancement (AIEE) active material for identification of third level details of latent fingerprint in crime scene is presented in this study. Latent fingerprint imaging is a crucial tool for national security and crime recognition, requiring environmentally sustainable, nontoxic materials. To address this need, we have developed a green fluorescence‐emitting material, THCHO, that binds effectively to latent fingerprints, enabling clear, high‐resolution visualization. The solution produces strong green fluorescence that highlights fingerprint imprints with exceptional detail and contrast. The material is applicable across various substrates, making it efficient for on‐site visualization. The synthesized organic conjugated material THCHO rapidly visualizes precise fingerprint substructures within 5 s using a simple spray method. It maintains high contrast and low interference across different substrates, such as glass, aluminum foil, plastic, and ironware, even in diverse backgrounds. Additionally, the THCHO material demonstrates high stability, retaining its fluorescence imaging capabilities for up to 35 days and after water washing. This is the first report of using a conjugated organic thiophene material for latent fingerprint fluorescence imaging, suggesting potential applications in other fields.

chemistry, analytical
A Facilely Synthesized Dual-State Emission Platform for Picric Acid Detection and Latent Fingerprint Visualization.

Duo Xi,Yanzi Xu,Ruohan Xu,Zhi Wang,Daomeng Liu,Qifei Shen,Ling Yue,Dongfeng Dang,Lingjie Meng

DOI: https://doi.org/10.1002/chem.201905169

2020-01-01

Chemistry

Abstract:To achieve a highly efficient, dual-state emission platform for picric acid (PA) detection and latent fingerprint (LFP) visualization, flexible alkyl chains have been facilely attached to the commercial organic dye 3,4,9,10-perylenetetracarboxylic dianhydride to provide the target perylenetetracarboxylate molecules PTCA-C4, PTCA-C6, and PTCA-C12. Interestingly, all these molecules exhibited impressive fluorescence characteristics with high photoluminescence quantum yields (PLQYs) of around 93.0 % in dilute solution. Also, emissive features were observed in the solid state because close molecular packing is prevented by the alkyl chains, especially for PTCA-C6, which has a high PLQY value of 49.0 %. Benefiting from its impressive fluorescence performance in both solution and as aggregates, PTCA-C6 was used as a dual-state emission platform for PA detection and also LFP visualization. For example, double-responsive fluorescence quenching in solution was observed in PA detection studies, resulting in high quenching constants (K-SV) and also low limit-of-detection values. Furthermore, the fingerprint powder based on PTCA-C6 also presented an impressive performance on various substrates in terms of fluorescence intensity and resolution, clearly providing the specific fine details of latent fingerprints. These results demonstrate that the facilely synthesized PTCA-C6 with efficient dual-state emission exhibits great potential in the real-world applications of PA detection and LFP visualization.
Visualization of Latent Fingermarks by Enhanced Chemiluminescence Immunoassay and Pattern Recognition

Linru Xu,Zhiyuan Cao,Rongliang Ma,Zizheng Wang,Qi Qin,Eryun Liu,Bin Su

DOI: https://doi.org/10.1021/acs.analchem.9b02631

IF: 7.4

2019-01-01

Analytical Chemistry

Abstract:Herein we report the combination of enzyme-linked immunoassay and pattern recognition analysis for extracting both chemical and spatial information from latent fingermarks (LFMs). The development approach basically involves two steps, namely, specific recognition of protein and polypeptide secretions present in the ridge residues of LFMs by horseradish peroxidase (HRP)-labeled antibodies and the HRP-catalyzed chemiluminescent (CL) reaction between luminol and H2O2. The emitted light can spatially resolve the ridges, generating a bright image against the dark object surface for visualization of an LFM. Meanwhile, thanks to the molecular specificity of the immunoassay step, the emission also provides us additional information on the existence of specific substances in LFMs. The developed LFMs are further processed by a set of digital image processing procedures. Quantitative analysis based on minutia features shows that even poorly developed fingermarks can be matched successfully. This work offers the promise of facilitating cross-disciplinary studies between data-processing approaches and fingermark development techniques, such as the extraction of more information from LFM evidence, as well as the establishment of evaluation criteria for an enhancement technique.
Instantaneous High-Resolution Visual Imaging of Latent Fingerprints in Water Using Color-Tunable AIE Pincer Complexes

Lixin Duan,Qingshu Zheng,Tao Tu

DOI: https://doi.org/10.1002/adma.202202540

Abstract:Instant visualization of latent fingerprints is developed by using a series of water-soluble terpyridine zinc complexes as aggregation-induced emission probes in pure water, under UV light or ambient sunlight. By simply soaking, or spraying with an aqueous solution of the probe, bright yellow fluorescence images with high contrast and resolution are readily developed on various surfaces including tinfoil, glass, paper, steel, leather, and ceramic tile. Remarkably, latent fingerprints can be visualized within seconds including details of whorl and sweat pores. The color of emission can be tuned from blue to orange by modifying the pincer ligands, allowing direct imaging under sunlight. These inexpensive, water-resistant, and color-tunable probes provide a practical approach for latent fingerprints recording and analysis, security protection, as well as criminal investigation in different scenarios.
High-resolution and Instantaneous Imaging of Latent Fingerprints

Ming Cheng,Juli Jiang,Jean-Claude Chambron,Leyong Wang

DOI: https://doi.org/10.1016/j.cclet.2022.107991

IF: 9.1

2023-01-01

Chinese Chemical Letters

Abstract:Tu group from Fudan University utilized a supramolecular assembly strategy and employed terpyridine Zn(II) complexes to selectively improve fluorescent properties and enhance the ability to bind components in latent fingerprints (LFPs), which provides an efficient approach for practical LFPs recording and analysis in different scenarios.Image, graphical abstract
An AIEE-active Triphenylethylene Derivative with Photoresponsive Character for Latent Fingerprints Detection via a Simple Soaking Method

Maomao Li,Wenjie Zhu,Dongdong Song,Zuoqin Liang,Changqing Ye

DOI: https://doi.org/10.1007/s10895-024-03664-2

2024-03-24

Journal of Fluorescence

Abstract:Latent fingerprints (LFPs) is one of the most important physical evidence in the criminal scene, playing an important role in forensic investigations. Therefore, developing highly sensitive and convenient materials for the visualization of LFPs is of great significance. We designed and synthesized an organic fluorescent molecule TP-PH with aggregation-induced enhanced emission (AIEE) activity. By simply soaking, blue fluorescent images with high contrast and resolution are readily developed on various surfaces including tinfoil, steel, glass and plastic. Remarkably, LFPs can be visualized within 5 min including the first-, second- and tertiary-level details. In addition, TP-PH exhibits interesting photoactivated fluorescence enhancement properties. Under irradiation of 365 nm UV light with a power density of 382 mW/cm 2 , the fluorescence quantum yield displays approximately 21.5-fold enhancement. Mechanism studies reveals that the photoactivated fluorescence is attributed to the irreversible cyclodehydrogenation reactions under UV irradiation. This work provides a guideline for the design of multifunctional AIEE fluorescent materials.

chemistry, physical, analytical,biochemical research methods
AIE-active dipyridinyltriphenylamine for dual-model visualization of latent fingerprints

Wenling Huang,Na Jiang,Yi Qu,Xinyu Lv,Huimin Zhou,Linlin Wang,Le Wang,Yichuan Rui

DOI: https://doi.org/10.1016/j.dyepig.2023.111509

IF: 5.122

2023-07-10

Dyes and Pigments

Abstract:The development of highly efficient latent fingerprints technology (LFPs) on different background remains extremely vital for forensic and criminal investigations. In this work, a pure organic molecular sensor (DPTPA1) was designed to image LFP with strong signal-to-noise ratio by optimizing the imaging technology. DPTPA1 exhibits aggregation-induced emission (AIE) properties in both aqueous solution and solid state. Two pyridine moieties and one aldehyde moiety were introduced as the end-capped units. DPTPA1 exhibits the typical solvatochromic effect whose maximum emission wavelengths red-shift from 410 nm to 540 nm with the increasing polarity of solvents. The obvious emission of DPTPA1 in the aqueous solution is observed around 500 nm ( φ = 9.6%). Both cyanoacrylate glue fuming (CGF) and powder dusting (PD) methods were used to obtain the fluorescent images of LFP on glass, tinfoil, steel and plastic substrates. Among them, the CGF method can image the clear second level details of LFP on the glass and tinfoil. The PD method using DPTPA1-loaded silica gel material can obtain the high quality LFP images on the curved surface of all four substrates. This work provides a strategy for lowing the cost in the broad fields of LFPs imaging.

engineering, chemical,chemistry, applied,materials science, textiles
Rational Design of Fluorescent Nanoparticles: from Wavelength Redshift to Increased Water Solubility for Stable and High-Resolution Imaging of Latent Fingerprints

Nan Wang,Hua-Feng Mao,Huan Yang,Yi-Miao Zhang,Feng Qiu,Hui Yang,Shan Qian,Zhou-Yu Wang,Qian Zhou,Jun Li,Xiao-Qi Yu

DOI: https://doi.org/10.1016/j.molstruc.2024.139933

IF: 3.841

2024-01-01

Journal of Molecular Structure

Abstract:Efficient and accurate visual identification of latent fingerprints is crucial in areas such as criminal investigation and information security. Aggregation-induced luminescence (AIE) fluorescent materials are widely used in this field because of their strong fluorescence and easy functionalization. They have attracted significant interest and emerged as a promising area since the introduction of the AIE concept. Here a new water-soluble fluorescent nanoparticle, flu-p-DITPA, through amphiphilic self-assembly with amphiphilic polymers macro-CTA-mPEG2000 (P1) and exhibits typical AIE properties. The core molecule, indo-DITPA, derived from the triphenylamine backbone, was obtained through rational molecular design and theoretical calculations, and the calculated results were confirmed with experimental results. The photophysical properties of indo-DITPA and flu-p-DITPA have been meticulously studied, revealing their remarkable characteristics. Taking advantage of their favorable photophysical properties, good water solubility, and biocompatibility, the researchers have devised a simple yet effective method for visualizing latent fingerprints (LFPs) with high resolution under UV light. This method enables the easy decoding of latent fingerprint information at primary, secondary, and tertiary levels. Importantly, this technique is simple, rapid, and user-friendly, marking a significant step forward in the field of forensic science and fingerprint analysis.
Electrochemiluminescence Imaging of Latent Fingerprints by Electropolymerized Luminol

Shujie Hu,Zhiyuan Cao,Lin Zhou,Rongliang Ma,Bin Su

DOI: https://doi.org/10.1016/j.jelechem.2020.114238

IF: 4.598

2020-01-01

Journal of Electroanalytical Chemistry

Abstract:An efficient method has been developed for visualizing latent fingerprints by spatially selective electropolymerization of luminol on the ITO electrode. The fingerprint deposited on the electrode surface functions as a mask so that polyluminol is formed on the bare electrode surface. Therefore, electrochemiluminescence is only generated between the ridges of fingerprint, eventually yielding a negative ECL image. This method is easy to operate and safe to examiners. In addition, the second- and third-level details of fingerprints can be well resolved, indicating the potential application for personal identification and forensic investigation.

Aggregation Induced Emission for the Recognition of Latent Fingerprints.

Enhancing the Visualization of Latent Fingerprints by Aggregation Induced Emission of Siloles

Aggregation-Induced Emission Luminogens for Latent Fingerprint Detection

Aggregation-Induced Emissions of Tetraphenylethene Derivatives and Their Utilities As Chemical Vapor Sensors and in Organic Light-Emitting Diodes

Real-Time Fluorescence In Situ Visualization of Latent Fingerprints Exceeding Level 3 Details Based on Aggregation-Induced Emission

Aggregation-enhanced emissions of intramolecular excimers in disubstituted polyacetylenes.

Single-molecule multi-target fluorescent imaging for latent fingerprints based on aggregation-induced emission

Bioimaging: Biocompatible Nanoparticles with Aggregation‐Induced Emission Characteristics as Far‐Red/Near‐Infrared Fluorescent Bioprobes for in Vitro and In Vivo Imaging Applications (Adv. Funct. Mater. 4/2012)

Enhancing the Visualization of Latent Fingerprints by Electrochemiluminescence of Rubrene

High-definition and robust visualization of latent fingerprints utilizing ultrabright aggregation-induced emission of iridium developer

Imaging Latent Fingerprints by Electrochemiluminescence

Synthesis of D-A typed AIE luminogens in isomeric architecture and their application in latent fingerprints imaging

AIEE—Active Green Fluorescence Imaging Technique for Latent Fingerprint Application

A Facilely Synthesized Dual-State Emission Platform for Picric Acid Detection and Latent Fingerprint Visualization.

Visualization of Latent Fingermarks by Enhanced Chemiluminescence Immunoassay and Pattern Recognition

Instantaneous High-Resolution Visual Imaging of Latent Fingerprints in Water Using Color-Tunable AIE Pincer Complexes

High-resolution and Instantaneous Imaging of Latent Fingerprints

An AIEE-active Triphenylethylene Derivative with Photoresponsive Character for Latent Fingerprints Detection via a Simple Soaking Method

AIE-active dipyridinyltriphenylamine for dual-model visualization of latent fingerprints

Rational Design of Fluorescent Nanoparticles: from Wavelength Redshift to Increased Water Solubility for Stable and High-Resolution Imaging of Latent Fingerprints

Electrochemiluminescence Imaging of Latent Fingerprints by Electropolymerized Luminol