Abstract:The effect of precipitation hardening on mechanical properties and coarsening behavior of Cu-rich precipitates in a Cu-bearing 316L austenite stainless steel after aging at 700°C for different time were systematically investigated. The variations of morphology and composition of Cu-rich precipitates as a function of aging time were respectively characterized by electrical resistivity, atom probe tomography (APT) and transmission electron microscopy (TEM). It was found that both hardness and mechanical strength increased to peak value within short aging time, and remained nearly unchanged with prolonged aging time. The TEM observation confirmed a coherent interface between Cu-rich precipitates and austenite matrix, while high number densities of spheroidal Cu-rich precipitates were observed in all aged samples. APT analyses confirmed virtually 100% Cu core composition of Cu-rich precipitates, whereas the average radius was slightly increased from 1.38±0.46nm to 2.39±0.81nm with increasing the aging time. The relatively slow growth and coarsening behavior of Cu-rich precipitates was largely attributed to the slower diffusion kinetics of Cu, low interfacial energy and high strain energy of Cu-rich precipitates in the austenite matrix, and was well predicted by the Lifshitz-Slyozov-Wagner theory. The slow increase in average radius of Cu-rich precipitates was consistent with the modest change in hardness and yield strength with extended aging. In addition, the precipitation strengthening effects of Cu-rich precipitates were quantitatively evaluated and analyzed. These cumulative results and analyses could provide a solid foundation for much wider applications of Cu-bearing stainless steels.

Correlation of Cu precipitation with austenite–ferrite transformation in a continuously cooled multicomponent steel: An atom probe tomography study

Direct observation of Cu interphase precipitation in continuous cooling transformation by atom probe tomography

Comparative Study on Austenite Decomposition and Cu Precipitation During Continuous Cooling Transformation

Cu precipitation on dislocation and interface in quench-aged steel

Regulation of Cu Precipitation by Intercritical Tempering in A Hsla Steel

High-resolution Transmission Electron Microscopy Characterization of the Structure of Cu Precipitate in a Thermal-aged Multicomponent Steel

On the Role of Ni in Cu Precipitation in Multicomponent Steels

Atomic-scale study on core-shell Cu precipitation in steels: atom probe tomography and ab initio calculations

Compositional Variants of Cu-rich Precipitate in Thermally Aged Ferritic Steel

Phase field study of the copper precipitation in Fe-Cu alloy

Concurrent (Fe,Mo)2C carbides and Cu-rich clusters precipitation in ferritic steel containing copper during aging

Copper Precipitation Behavior and Mechanical Properties of Cu-bearing 316L Austenitic Stainless Steel: A Comprehensive Cross-Correlation Study

Atom probe tomography study of Cu precipitation behavior in 22Cr-13Ni-5Mn austenitic stainless steel

Reinforced Cu Precipitation Strengthening by Matrix Transformation from Martensite to Austenite in High-Strength Low-Alloy Steel

Hierarchical Cu Precipitation in Lamellated Steel after Multistage Heat Treatment

Dynamic Continuous Cooling Transformation Behavior Of A Novel Cu-Bearing Pipeline Steel

Co-precipitated Ni/Mn Shell Coated Nano Cu-rich Core Structure: A Phase-Field Study

Co-precipitation mechanism of Cu-rich phase and κ-carbide precipitates in Fe-28Mn-10Al-1C-3Cu austenitic low-density steel

Nanoscale Cu particle evolution and its impact on the mechanical properties and strengthening mechanism in precipitation-hardening stainless steel

STUDY ON PRECIPITATION BEHAVIOR OF PHASES CONTAINING Cu IN THE Cu-BEARING STEEL IN CONTINUOUS COOLING PROCESS

Atom-probe Study of Cu and NiAl Nanoscale Precipitation and Interfacial Segregation in a Nanoparticle-Strengthened Steel