The Isolated Austenite Forming during High-Temperature Cooling and Its Influence on Pitting Corrosion Resistance in S32750 Duplex Stainless Steel
Xiaohan Wu,Zhigang Song,Jianguo He,Zhiyi Bao,Han Feng,Wenjie Zheng,Yuliang Zhu
DOI: https://doi.org/10.3390/met12081316
IF: 2.695
2022-08-06
Metals
Abstract:The formation mode of isolated austenite (IA) formed during high-temperature cooling and its effect on pitting corrosion resistance of S32750 DSS were investigated. As the structure formed during the high-temperature cooling process after hot rolling in S32750 duplex stainless steel (DSS), the precipitation of isolated austenite (IA) can be considered as the combined production of temperature and cooling rates. IA generated at the ferrite (α) grain boundaries or internal α and performed the K-S crystallographic relation with the α N element enriched in IA. The redistribution of elements not only increased the concentration gradient between α/IA, but also reduced the pitting resistance equivalent number (PREN) of original austenite (γ). Scanning Kelvin probe (SKP) and Gaussian fitting proved that with prolonged corrosion time, the potential difference enlarged and local corrosion aggravated. Measured by the weight loss method, pitting resistance decreased to one-third of the solid solution state due to the existence of IA; following, the quantities, sizes, and depth of corrosion pits increased significantly. In addition to α/γ boundaries and α/α boundaries, corrosion pits preferred to initiate around IA. The IA that appeared at α grain boundaries deteriorated the pitting corrosion resistance severely. Furthermore, original austenite with decreased PREN tended to be corroded. In general, the order of pitting occurrence is displayed as follows: α-γ-IA.
materials science, multidisciplinary,metallurgy & metallurgical engineering