Abstract:It has been well established that the entangled molecular network facilitates the formation of shish-kebabs under flow field, however, the entangled network, usually formed by long chains, tends to disentangle due to molecular relaxation. In the present work, a small amount of lightly crosslinked polyethylene (LCPE), which can be considered as stable molecular chain networks, was added to short-chain polyethylene and then injection-molded using a modified injection molding technology-oscillation shear injection molding (OSIM), which can exert a successive shear field on the melt in the mold cavity during packing stage. The hierarchic structure of the OSIM samples was characterized through differential scanning calorimetry (DSC), wide-angle X-ray diffraction (WAXD) and scanning electron microscopy (SEM). It was found that the oscillation flow field promoted the formation of interlinked shish-kebabs in the intermediate layer of OSIM samples, while there are still typical spherulites in the core layer of OSLM neat polyethylene (PE). The interlinked shish-kebab structure led to remarkable mechanical enhancement from 27.6 and 810.2 MPa of conventional injection molding (CIM) samples to 42.7 and 1091.9 MPa of OSIM samples for tensile strength and modulus, respectively. More importantly, under the same flow condition, the samples containing LCPE networks (termed PEX) exhibit rich shish-kebab structure both in the intermediate and core layers. Moreover, the addition of LCPE also generated stronger interlinked shish-kebabs, in which kebabs and shishes are connected by covalent bonds, rather than topological entanglement points. This special structure leads to further reinforcement from 29.6 and 879.5 MPa of CIM PEX samples to 57.5 and 1311.7 MPa of OSIM PEX samples for tensile strength and modulus, respectively. The results demonstrated that the networks with stable entanglement points are more helpful to induce the formation of shishes under flow than those with topological entanglement points. Our results set up a new method to reinforce polymer parts by tailoring the structure and morphology.

Alternating Multilayer Structure of Polyethylene/polypropylene Blends Obtained Through Injection Molding

Enhanced Multiphase Interfacial Interaction of Impact Polypropylene Copolymer by In-Situ Introducing Polyethylene

Lamellar Orientation in the Blends of Linear Low Density Polyethylene and Isotactic Polypropylene Induced by Dynamic Packing Injection Molding

Epitaxial Crystallization and Oriented Structure of Linear Low-Density Polyethylene/Isotactic Polypropylene Blends Obtained Via Dynamic Packing Injection Molding

Morphology, rheology, and mechanical properties of polylactide/ poly(ethylene-co-octene) blends

Influence of Structure Gradients in Injection Moldings of Isotactic Polypropylene on Their Mechanical Properties

Crystallization of Polypropylene in Multilayered Spaces: Controllable Morphologies and Properties

Morphology and Properties of Injection-Moulded Recycled Poly(Ethylene Terephthalate)/Poly(Ethylene Octene) Blends

Fabrication of Architectured Multilayers with Mismatched Rheological Behaviors: Layer Stability, Structure, and Confinement Dictate Polyethylene-Based Film Properties

Morphological analysis of mechanically recycled blends of high density polyethylene and polypropylene with strong difference in melt flow index

Effect of Micro-Mold Cavity Dimension on Structure Andproperty of Polylactic Acid/Polycaprolactone Blend Undermicroinjection Molding Conditions

Multilayered Core–shell Structure of the Dispersed Phase in High‐impact Polypropylene

Formation of Interlinked Shish-Kebabs in Injection-Molded Polyethylene under the Coexistence of Lightly Cross-Linked Chain Network and Oscillation Shear Flow

Melt Processing and Structural Manipulation of Highly Linear Disentangled Ultrahigh Molecular Weight Polyethylene

Fabrication of Multilayered Β-Form Transcrystallinity in Isotactic Polypropylene for Achieving Optimized Mechanical Performances

Research on the multilayer injection molding of thick-walled polymer optical products

Shear-induced epitaxial crystallization in injection-molded bars of high-density polyethylene/isotactic polypropylene blends

Origin of Various Lamellar Orientations in High-Density Polyethylene/isotactic Polypropylene Blends Achieved Via Dynamic Packing Injection Molding: Bulk Crystallization Vs. Epitaxy

Optimization of polypropylene high-strength injection molding welding and interface structure analysis

Effect of Micro-Mold Cavity Dimension on Structure and Property of Polylactic Acid/Polycaprolactone Blend under Microinjection Molding Conditions

Effect of Morphology on the Properties of High Density Polyethylene/Polyamide 6 Composite