Abstract:The (1 − x)(Li 0.03 Na 0.5 K 0.47 )(Nb 0.92 Sb 0.05 Ta 0.03 )O 3 –xBa 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (LNKNST–BCZT, x = 0, 0.5, 1.5, 2.5, and 3.5%) lead-free piezoceramics were synthesized by the conventional solid-state reaction method with adding nano-sized Ba 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (BCZT) powder to investigate their influences on crystal structure and electrical properties. The X-ray diffraction (XRD) analysis reveals that all the sintered LNKNST–BCZT ceramics exhibit pure perovskite structure with the mainly rhombohedral (R) phase or the coexistence of rhombohedral (R) phase and tetragonal (T) phase. The composition of the LNKNST–1.5%BCZT ceramics locates around the critical point, i.e., the ceramics changing from the coexistence of rhombohedral (R) phase and tetragonal (T) phase to purely rhombohedral (R) phase, and presents the most densified microstructure morphology, which can be confirmed further by the field emission scanning electron microscope (FESEM) observation. There are two dielectric anomalies in the temperature dependent dielectric properties curves of the LNKNST–BCZT ceramics, which correlate with the ferroelectric rhombohedral (R) phase changing to the ferroelectric tetragonal (T) phase, and then to the paraelectric cubic (C) phase. Both the Curie–Weiss law and the power law fittings confirm the diffuse phase transition ferroelectrics characteristic of the LNKNST–1.5%BCZT ceramics, which is considered as correlating with the polar nanoregions (PNRs). Due to the densification effect caused by the chosen amount of nano-sized BCZT doping and the construction of R–T polymorphic phase boundary, the LNKNST–1.5%BCZT ceramics exhibit the best ferroelectric and piezoelectric properties. The complex impedance spectroscopy analysis confirms that the extrinsic electrical conduction mechanism at high temperatures is dominated by the oxygen vacancies induced by the evaporation of the alkali metals during sintering.

Bifeo3-Modified (li, K, Na)(Nb, Ta)O-3 Lead-Free Piezoelectric Ceramics with Temperature-Stable Piezoelectric Property and Enhanced Mechanical Strength

Addition of Small Amounts of Bifeo3 to (Li,k,na)(nb,ta)o-3 Lead-Free Ceramics: Influence on Phase Structure, Microstructure and Piezoelectric Properties

Effects of nano-sized BCZT on structure and electrical properties of KNN-based lead-free piezoceramics

Enhanced Temperature Stability of (1 − )(KNa)LiNbO-(BiNa)TiO Lead-Free Piezoelectric Ceramics

New K0.48Na0.52NbO3–Bi(Zn0.5Zr0.5)O3 Lead-Free Ceramics: Microstructure and Piezoelectricity

Enhanced Piezoelectricity and Temperature Stability in LaFeO3-modified KNN-based Lead-Free Ceramics

Enhanced Temperature Stability of (1 − x )(K 0.5 Na 0.5 ) 0.94 Li 0.06 NbO 3 - x (Bi 0.5 Na 0.5 )TiO 3 Lead-Free Piezoelectric Ceramics

Phase Structure and Electrical Properties of Lead-Free (0.96Bi_(0.5)Na_(0.5)TiO_3~-0.04BaTiO_3)-(0.98K_(0.5)Na_(0.5)NbO_3~-0.02LiTaO_3) Piezoelectric Ceramics

Preparation of KNN Based Lead-Free Piezoelectric Ceramics Via Composition Designing and Two-Step Sintering

Effect Of (Bi0.5k0.5)Tio3 On The Electrical Properties, Thermal And Fatigue Behavior Of (K0.5na0.5)Nbo3-Based Lead-Free Piezoelectrics

Enhanced Temperature Stability Of (1-Aeuro Parts Per Thousand X)(K0.5na0.5)(0.94)Li0.06nbo3-X(Bi0.5na0.5)Tio3 Lead-Free Piezoelectric Ceramics

Enhancement of piezoelectric properties and temperature stability by forming an MPB in KNN-based lead-free ceramics

Phase Structure and Electrical Properties of (Li,ta)-Doped (k,na)nbo3 Lead-Free Piezoceramics in the Vicinity of Na/K = 50/50

Piezoelectric and Dielectric Properties of (Na<sub>0.5</sub>K<sub>0.5</sub>)NbO<sub>3</sub>–(Bi<sub>0.5</sub>Na<sub>0.5</sub>)<sub>0.94</sub>Ba<sub>0.06</sub>TiO<sub>3</sub>Lead-Free Piezoelectric Ceramics

Niobate-based lead-free piezoceramics: a diffused phase transition boundary leading to temperature-insensitive high piezoelectric voltage coefficients

Phase Transition Behavior and Electrical Properties of Lead-Free (1−x)(0.98k0.5na0.5nbo3–0.02litao3)–x(0.96bi0.5na0.5tio3–0.04batio3) Piezoelectric Ceramics

Effect of (Bi 0.5 K 0.5 )TiO 3 on the electrical properties, thermal and fatigue behavior of (K 0.5 Na 0.5 )NbO 3 -based lead-free piezoelectrics

Polymorphic Phase Transition And Enhanced Piezoelectric Properties Of Litao3-Modified (Na0.52k0.48) (Nb0.93sb0.07)O-3 Lead-Free Ceramics

Influence of Sintering Temperature on Grain Growth and Phase Structure of Compositionally Optimized High‐Performance Li/Ta‐Modified (na,k)nbo3 Ceramics

Combined Effects of Li Content and Sintering Temperature on Polymorphic Phase Boundary and Electrical Properties of Li/Ta Co-Doped (na, K)NbO 3 Lead-Free Piezoceramics

Polymorphic phase transition and enhanced piezoelectric properties of LiTaO<sub>3</sub>-modified (Na<sub>0.52</sub>K<sub>0.48</sub>) (Nb<sub>0.93</sub>Sb<sub>0.07</sub>)O<sub>3</sub>lead-free ceramics