Abstract:Aiming at further investigating the combination effect of concentration of beta-nucleating agent (beta-NA) and stereo-defect distribution on the crystallization behavior of beta-nucleated isotactic polypropylene (beta-iPP), in this study, the crystallization behavior and polymorphic morphology of two beta-iPP resins with nearly same average isotacticity (PP-A and PP-B) but different uniformities of stereo-defect distribution were investigated by differential scanning calorimetry (DSC), wide angle X-ray diffraction (WAXD) and polarized optical microscopy (POM). The results of DSC and WAXD showed that the addition of TMB-5 increases the crystallization temperature and decreases the spherulite sizes of both PP-A and PP-B, and reduces their crystallization energy barriers as well; however, the polymorphic behaviors of PP-A and PP-B exhibit different dependence on the TMB-5 concentration. For PP-A with less uniform distribution of stereo-defects, beta-phase can be observed only when the TMB-5 concentration is no less than 0.1 wt.%, while for PP-B with more uniform stereo-defect distribution, addition of 0.01 wt.% TMB-5 can induce the formation of beta-phase. Moreover, the analysis of POM indicated that the crystalline morphologies of both PP-A and PP-B change greatly with the TMB-5 concentration, and the variation features of PP-A and PP-B are quite different from each other. PP-B with more uniform stereo-defect distribution was more favorable for the formation of large amount of beta-phase in the presence of wide concentration range of TMB-5. The different polymorphic behaviors and their different dependences on the beta-NA concentration were related to the different uniformities of stereo-defect distribution of the samples, since the distribution of stereo-defects could restrain the regular insertion of molecular chains during crystallization and thus determine the tendency the alpha-phase crystallization of the sample. Copyright (c) 2014 John Wiley & Sons, Ltd.

Polymerization control and fast characterization of the stereo-defect distribution of heterogeneous Ziegler-Natta isotactic polypropylene

Investigation of the stereodefect distribution and conformational behavior of isotactic polypropylene polymerized with different Ziegler-Natta catalysts

Influence of the stereo-defect distribution on the crystallization behavior of Ziegler-Natta isotactic polypropylene

Investigation of the crystallization behavior of isotactic polypropylene polymerized with different Ziegler-Natta catalysts

Characterization of isotactic polypropylene prepared with dimethylsilyl bis(1-indenyl)zirconium dichloride supported on methylaluminoxane pretreated silica

A Convenient, Highly-Efficient Method for Preparation of Hydroxyl-Terminated Isotactic Poly（propylene） and Functional Di-Block Copolymer

STUDY ON CRYSTALLIZATION BEHAVIOR OF ISOTACTIC POLYPROPYLENE PRODUCED BY SUPERCRITICAL POLYMERIZATION

Effects of Stereo-Defect Distribution and Molecular Mass in the Non-Isothermal Crystallization Behavior of Β-Nucleated Isotactic Polypropylene

Investigation on the structure and crystallization behavior of controlled-rheology polypropylene with different stereo-defect distribution

Investigation on the Tensile Behavior and Morphology Evolution of Isotactic Polypropylene Films Polymerized with Different Ziegler-Natta Catalysts

Non-isothermal crystallization behavior and melting behavior of Ziegler–Natta isotactic polypropylene with different stereo-defect distribution nucleated with bi-component β-nucleation agent

Effects of Molecular Mass and Stereo-Defect Distribution on the Crystallization and Morphological Behavior of β-Nucleated Isotactic Polypropylene

Microtacticity of Polypropylene Fractions Produced by Different Active Sites of Heterogeneous Ziegler-Natta Catalyst

Morphology and Mechanical Behavior of Isotactic Polypropylene with Different Stereo-Defect Distribution in Injection Molding

Effect of Stereodefects Distribution on Rheological Behavior of Isotactic Polypropylene

Understanding in the morphology and tensile behavior of isotactic polypropylene cast films with different stereo-defect distribution

Effects of Stereo-Defect Distribution on the Crystalline Morphology and Tensile Behavior of Isotactic Polypropylene Prepared by Compression Molding Process

Investigation On The Dynamic Crystallization And Melting Behavior Of Beta-Nucleated Isotactic Polypropylene With Different Stereo-Defect Distribution-The Role Of Dual-Selective Beta-Nucleation Agent

Characterization of the effects of the C/N mixed external donors on the stereo-defects distribution of polypropylene by successive self-nucleating and annealing and 13 C-NMR techniques

Crystallization Behavior And Morphology Of Beta-Nucleated Isotactic Polypropylene With Different Stereo-Defect Distribution

Solvent and solvation effects on reactivities and mechanisms of phospho group transfers from phosphate and phosphinate esters to nucleophiles