Abstract:AbstractDifficult-to-machine materials such as Ni-based superalloy suffer from severe tool wear and poor surface quality; therefore, the cooling mechanism is the key to improving machining performance and reducing the environmental pollution in manufacturing. In the past, plenty of studies verified that the micro-texture on the cutting insert improved the cutting performance under the same cooling condition. The main explanation is that the second generated cracks caused the capillary siphon phenomenon and increased the wettability of the subsurface of the workpiece. In order to investigate the effect of surface wettability differences on the cutting performance of the tool under different micro-textured morphologies, three types of micro-textured CBN tools with pit, linear, and sinusoidal morphologies were fabricated by laser machining technology. Through cutting experiments on Inconel 718 Ni-based superalloy, the cutting force, tool wear, and machined surface roughness of different micro-textured tools were compared and analyzed. The relationship between cutting performance and wettability of different shaped micro-texture was obtained by measuring the contact angle using PT-705B optical angular contact meter. The experimental results show that the presence of surface micro-textures enhances the surface wettability of the tool. It effectively reduces the cutting force and slows down the rake face’s wear and the machined part’s surface roughness. Compared with other morphologies, sinusoidal micro-textured tools show the best cutting performance. Among the four morphologies of micro-textured tools, cutting performance improvement increases with surface wettability. More generally, these primary findings are consistent with research showing that wettability is critical in micro-texture generation for high-performance machining. The conclusion is very much the key component in future attempts to overcome the assumption of the capillary siphon phenomenon on the subsurface of the workpiece.

Performance of Carbide Tools with Textured Rake-Face Filled with Solid Lubricants in Dry Cutting Processes

Ultrasonic Elliptical Vibration Texturing of the Rake Face of Carbide Cutting Tools for Adhesion Reduction

Design, Fabrication and Properties of a Self-Lubricated Tool in Dry Cutting

Friction and wear behaviors of the carbide tools embedded with solid lubricants in sliding wear tests and in dry cutting processes

Cutting Performance of Cemented-Carbides-Based Self-Lubricated Tool Embedded with Different Solid Lubricants

Enhancement of carbide tool performance during dry machining through a combination of laser surface texturing and tungsten disulfide soft coatings

Tribological performance of hydrophobic and micro/nano triangle textured rake face of cutting tools

Study on the Friction-Reducing Mechanisms of Surface Texture Cemented Carbide under Dry Sliding

Effect of Different Geometric Texture Shapes on Wettability and Machining Performance Evaluation Under Dry and MQL Environments

The effects of micro-texture shape on serrated chip geometry in the hardened steel AISI D2 cutting process

Mechanisms and predictive force models for machining with rake face textured cutting tools under orthogonal cutting conditions

Influence of Textured Diamond Film on Tribological Properties of Cemented Carbide Substrate

Experiment and Theory of Cutting Forces for Cemented Carbides Based Self-Lubricated Tool Embedded with Solid Lubricants

Self-lubricating Behaviours of Ceramic Tools in Dry Cutting

Research on cutting lubrication performance of textured tools considering slip boundary conditions

Cutting performance of micro-textured PCBN tool

The Effect of Micro-Texture on Wear Resistance of WC/Co-based Tools During Cutting Ti-6Al-4V

Tribological Behavior of Textured Cemented Carbide Filled with Solid Lubricants in Dry Sliding with Titanium Alloys

Effect of micro-textured morphology with different wettabilities on tool cutting performance

Improving the Performance of Micro-Textured Cutting Tools in Dry Milling of Ti-6Al-4V Alloys

Investigation on Cutting Performance of Micro-Textured Cutting Tools