Abstract:Fatigue crack initiation mechanism at high cycle regime in a bimodal Ti-5Al-7.5V alloy are investigated by fracture observations, focused-ion-beam cross-section and electron back-scattered diffraction characterizations. The aged Ti-5Al-7.5V exhibits superior tensile and fatigue properties, alongside a wide range of fatigue life when tested at the stress levels of - 700-800 MPa. Fatigue failure was dominated by surface and subsurface crack initiation at facets matching basal planes. These faceted primary alpha (alpha p) grains generally have a medium or high Schmid factor (SF) for basal < a > slip. Moreover, a basal faceting process also occurred in the "hard" grains, in which the c-axis of the HCP-alpha grains was approximately parallel to the loading axis so that the < a > type slips were thought to be suppressed. The observed internal microcracks were formed along the grain boundaries located in clusters of alpha p grains, especially along (0001) twist boundaries. Furthermore, transmission electron microscope observations evidenced the absence of intense slip bands within faceted grain and fatigued alpha p grains, which indicates that the facet growth should not along the pre-existing slip bands resulting from high cycle fatigue loadings. The pre-existing structural defects including dislocation networks and subgrain boundaries within alpha p grains are relatively stable configurations under fatigue loadings. The observed fine (-500 nm in diameter) silicides were widely dispersed, whether the silicide can act as the crack nucleation site still needs further more detailed studies and this remains an open question.

Fatigue Crack Initiation and Propagation in A356 Alloy Reinforced with in Situ TiB2 Particles

The Relationship Between TiB2 Volume Fraction and Fatigue Crack Growth Behavior in the in Situ TiB2/A356 Composites

High Cycle Fatigue Behavior of the In-Situ TiB2/7050 Composite

Mechanical Properties and Fracture Morphology of In-situ TiB2 Particle Reinforced Aluminum Matrix Composites

Fatigue Crack Initiation and Propagation Dominated by Crystallographic Factors in TiB/near α-Ti Composite

Study on Microscopic Ductile Fracture of In-Situ TiB2/2024 Al Matrix Composite

Study fatigue crack initiation in TiB<sub>2</sub>/Al-Cu-Mg composite by <i>in-situ</i> SEM and X-ray microtomography

Study fatigue crack initiation in TiB2/Al-Cu-Mg composite by in-situ SEM and X-ray microtomography

Numerical Simulation of Fracture Behavior of In-Situ TiB2 Particle Reinforced 2024-T4 Aluminum Matrix Composites

Effects of stress state, strain rate, and temperature on fracture behavior of in situ TiB2/2024 Al composite

Damage mechanism of TiB;/2024Al composite in high-cyclic fatigue

Microstructural correlated damage mechanisms of the high-cycle fatigued in-situ TiB2/Al-Cu-Mg composite

High Fatigue Performance and Microscopic Mechanisms of In-Situ TiB2/7050Al Composite at Different Temperatures

In-situ Observation of Crack Evolution in Ti/Al Laminated Composite

High fatigue performance and microscopic mechanisms of in-situ TiB 2 /7050Al composite at different temperatures

Investigation on Particle Strengthening Effect in In-Situ TiB2/2024 Composite by Nanoindentation Test

Crack Initiation Mechanism in a High-Strength Ti-5Al-7.5V Alloy Subjected to High Cycle Fatigue Loading

Deformation, Fracture, and Fatigue Crack Growth Behavior in TiB-reinforced Near-Α Ti Matrix Composites Fabricated Using Powder Metallurgy Technique

Fatigue Behavior of In-Situ TiB2/7050Al Metal Matrix Composites: Fracture Mechanisms and Fatigue Life Modeling after Milling

Effects of three stress levels on the fatigue properties and fracture mechanisms of an in-situ synthesized TiB/Ti-6Al-4V titanium matrix composite

Microstructure and Properties of In-Situ Tib2 Particulates Reinforced A356 Composite