Abstract:Waste printed circuit boards (WPCBs) are hazardous wastes but also valuable resources. Mechanical crushing is widely used to recycle WPCBs. Some pollutants are released during the crushing, but the release mechanisms have been rarely reported. Herein, the experimentation results with the theoretical analysis can well explain the release mechanism of pollutants during the crushing of WPCBs. According to the size distribution of material in different crushing conditions, the collision analysis can describe the crushing process and illustrate the energy changes during the crushing. The energy changes in crack extension indicate that the reduced energy transferred to WPCBs results in a decrease in concentration and size of airborne particles with the crushing proceeding. Besides, the energy changes during the crushing illustrate the release mechanism of organic substances. In the early period of crushing, all branched chains on benzenes are broken to form phenol at the high energy. In the late period of crushing, phenol homologs are largely generated at the low energy. Moreover, the release behavior of triphenyl phosphate is relative to the accumulated energy during the crushing. This study provides a theoretical basis for the release of pollutants during the crushing process of WPCBs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c05017?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c05017</a>.Symbols and units in equations (Table S1); FTIR result for the WPCBs (Figure S1); picture of crusher (Figure S2); airborne particle detection point and sampler (Figure S3); average particles size and energy consumption for different crushing times (Figure S4); energy model of crushing process (Figure S5); fitting results of size distribution of particles (Figure S6); TG–MS results of WPCBs (Figure S7); GC–MS results of material and air samples (Figure S8); final structure and bond length of 4-OP (Figure S9); and intensity of organic compounds at different crushing times (Figure S10) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c05017/suppl_file/sc0c05017_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Study on Characteristics of Printed Circuit Board Liberation and Its Crushed Products.

Bioleaching of Typical Electronic Waste—Printed Circuit Boards (wpcbs): A Short Review

Unveiling the Release Mechanism of Pollutants during the Crushing Process of Waste Printed Circuit Boards

Recycle Technology for Recovering Resources and Products from Waste Printed Circuit Boards

Technology of Recycling Method of Reducing Pyrolysis Pollution during PCB Crushing

Environment-friendly recycling of resin in waste printed circuit boards

A cost-effective strategy for metal recovery from waste printed circuit boards via crushing pretreatment combined with pyrolysis: Effects of particle size and pyrolysis temperature

Application of corona discharge and electrostatic force to separate metals and nonmetals from crushed particles of waste printed circuit boards

STUDY ON COMMINUTION PERFORMANCE OF WASTE PRINTED WIRING BOARDS AT AMBIENT TEMPERATURE

A study on dust pollutants emitted from scrap printed circuit board crushing process

Interfacial and Mechanical Property Analysis of Waste Printed Circuit Boards Subject to Thermal Shock

Products Made from Nonmetallic Materials Reclaimed from Waste Printed Circuit Boards

Study on Recovery of Copper from Waste Printed Wiring Boards by Electrostatic Separation

Printed circuit board recycling process and its environmental impact assessment

Pyrolysis-Based Technology for Recovering Copper from Transistors on Waste Printed Circuit Boards

Unveiling Pyrolysis Mechanisms of Waste Printed Circuit Boards Through Multiphysics Simulation

Research on Recycling Technology of Printed Circuit Boards

Research Progress on the Recycling Technology for Nonmetallic Materials from Wasted Printed Circuit Board

Waste-Printed Circuit Board Recycling: Focusing on Preparing Polymer Composites and Geopolymers

Recycling of organic materials and solder from waste printed circuit boards by vacuum pyrolysis-centrifugation coupling technology

Current Status and Future Perspective of Waste Printed Circuit Boards Recycling