Abstract:Zn modified ZSM-5 zeolite supported Ni bifunctional catalysts were prepared by in-situ hydrothermal synthesis (Zn-Ni-ZSM-5), co-impregnation method (Zn-Ni/ZSM-5) as well as combining in-situ hydrothermal synthesis of Zn-ZSM-5 and sequential impregnation of Ni (Ni/Zn-ZSM-5) and used for the selective converting olefin to aromatics applicable for FCC gasoline hydro-upgrading. The Lewis (L) acid sites generated by ZnOH+ species and hydrogenation active sites from Ni0 species were varied with preparation method, in which their locations at the external surface or micropores of zeolite changed the acid properties of catalysts. Comparing to the Zn-Ni/ZSM-5 from the co-impregnation method, direct in-situ hydrothermal method could incorporate Zn and Ni species within zeolite, which makes the strong interaction between the metal species and the framework Al to form medium-strong L acids (ZnOH+/NiOH+). This leads to the decrease of ratio of Brønsted acid sites to L acid sites (B/L) from 0.40 to 0.12 and the difficulty in reducing of Ni cations to Ni0 from 57% to 30% Ni0 percent. Ni/Zn-ZSM-5 sample prepared by incorporating Zn species into micropores and sequential depositing Ni species at the external surface of zeolite possesses a low B/L ratio similar to Zn-Ni-ZSM-5 (0.20 versus 0.12) but a much higher Ni0 percent (52% versus 30%). Zn-Ni-ZSM-5 shows closer intimacy between Zn and Ni species comparing to Zn-Ni/ZSM-5 and Ni/Zn-ZSM-5. For the 1-hexene aromatization, the formed iso-alkene at acid sites was quickly saturated to iso-alkanes by the adjacent Ni0 particles over Ni-Zn-ZSM-5 catalyst in hydrogen steam. However, the location of aromatization active sites (ZnOH+, L acid sites) in micropores and hydrogenation active sites (Ni0 species) on external surface of Ni/Zn-ZSM-5 makes the tandem conversion of n-alkene → iso-alkene → aromatics, rather than the n-alkene → iso-alkene → iso-alkane. Thus, Zn-Ni-ZSM-5 with close intimacy of ZnOH+ and Ni0 particles shows a high iso-alkane selectivity (27.9% iC4 +), while Ni/Zn-ZSM-5 exhibits a high aromatics selectivity (39.6 %) in the conversion of 1-hexene in hydrogen steam. Similar results have also found in the conversion of n-heptane. Here, the control of the intimacy of Zn and Ni in ZSM-5 zeolites has been realized to be a good protocol to adjust the selective conversion of olefins/alkanes to aromatics versus iso-alkanes.

Selective Conversion of Microcrystalline Cellulose into Hexitols on Nickel Particles Encapsulated Within ZSM-5 Zeolite

The Hydrogenation/dehydrogenation Activity of Supported Ni Catalysts and Their Effect on Hexitols Selectivity in Hydrolytic Hydrogenation of Cellulose

Catalytic Hydrogenation of Levulinic Acid to Gamma-Valerolactone over Ni/ZrO2

Synthesis of Ni/mesoporous ZSM-5 for direct catalytic conversion of cellulose to hexitols: modulating the pore structure and acidic sites via a nanocrystalline cellulose template

The Pt-Enriched Ptni Alloy Surface and Its Excellent Catalytic Performance in Hydrolytic Hydrogenation of Cellulose

Fabrication of immobilized nickel nanoclusters decorated by C N species for cellulose conversion to C2,3 oxygenated compounds: Rational design via typical C- and N-sources

Efficient hydrothermal conversion of cellulose into methane over porous Ni catalyst

Al-Sn Bimetallic ZSM-5: Acidity Regulation and Excellent Performance in Cracking N-Hexane for Production of Light Olefins

Selective (ligno) cellulose hydrogenolysis to ethylene glycol and propyl monophenolics over Ni–W@C catalysts

Highly Efficient SiC-Supported Ni-Based Catalysts with Enhanced Recycle Stability for One-Pot Cellobiose Hydrolytic Hydrogenation to Hexitols

Selective Conversion of Concentrated Microcrystalline Cellulose to Isosorbide over Ru/C Catalyst

Atomically Dispersed Zn-NxCy Sites on N-doped Carbon for Catalytic Transfer Hydrogenation of Ethyl Levulinate into Γ-Valerolactone

Accurate location of Ni and W active sites in hierarchical zeolite catalyst for the conversion of cellulose to alcohols

Synthesis and consequence of Zn modified ZSM-5 zeolite supported Ni catalyst for catalytic aromatization of olefin/paraffin

Nickel‐Tin Nanoalloy Supported ZnO Catalysts from Mixed‐Metal Zeolitic Imidazolate Frameworks for Selective Conversion of Glycerol to 1,2‐Propanediol

Ni–Fe-based silicate-intercalated hydrotalcite: A potential catalyst for hexanol conversion

Heterogeneous selective hydrogenation of ethylene carbonate to methanol and ethylene glycol over a copper chromite nanocatalyst.

Highly Selective Conversion Of Methanol To Propylene: Design Of A Mfi Zeolite With Selective-Blockage Of (010) Surfaces

ZSM-5-supported Multiply-Twinned Nickel Particles: Formation, Surface Properties, and High Catalytic Performance in Hydrolytic Hydrogenation of Cellulose

Excellent catalytic performance over hierarchical ZSM-48 zeolite: Cooperative effects of enhanced mesoporosity and highly-accessible acidity

Selective preparation of 1-hydroxy-3,6-dioxabicyclo[3.2.1]octan-2-one by fast pyrolysis of cellulose catalyzed with metal-loaded nitrided HZSM-5