Abstract:Scheme of porous PVA hydrogel preparation and investigation of adsorption performance to Congo red. In this work, porous poly (vinyl alcohol) (PVA) hydrogels with different pore sizes were fabricated using inorganic non‐metallic porogens by an environmentally friendly method, providing a potential solution for the field of wastewater treatment. PVA hydrogels have gained much attention in the field of wastewater treatment due to their excellent adsorption performance and porous network structure. However, the employment of inorganic non‐metallic salts as porogens for PVA hydrogels has received limited attention so far. In this study, porous PVA hydrogels were prepared by freeze‐thawing and freeze‐drying with sodium sulfate (Na2SO4) and calcium carbonate (CaCO3) as porogens. PVA‐Na exhibited denser network structure with the concentration of Na2SO4 solution increased, and the tensile stress was enhanced by about 45 times. Meanwhile, the tensile stress of PVA‐Ca was improved significantly from 0.06 to 1.67 MPa, and the network structure became looser after adding CaCO3. Moreover, a comprehensive investigation was conducted on the adsorption performance of porous PVA hydrogel for Congo red (CR). Finally, five adsorption models were fitted to investigate the adsorption mechanism of porous PVA hydrogels, in which the maximum adsorption capacity of CR by PVA‐Na‐0.5 was predicted to be 215 mg/g by the Langmuir isothermal model fitting. Highlights The structure of PVA hydrogels was adjusted by Na2SO4 and CaCO3, respectively. The tensile stress of PVA‐Na with dense network structure increased 45 times. Compared to PVA‐FD, swelling equilibrium time of PVA‐Na reduced from 24 to 6 h. Equilibrium swelling rate of PVA‐Ca declined by half in comparison to PVA‐FD. Langmuir isothermal model predicted qmax of 215 mg/g for CR by PVA‐Na‐0.5.

Adsorption of Polyvinyl Alcohol from Wastewater by Sintered Porous Red Mud.

Preparation, characterization, and adsorption performance of porous polyamine lignin microsphere

Synthesis of Porous Red Mud/Slag-Based Spherical Geopolymers for Efficient Methylene Blue and Ni2+ Removal from Water

Preparation of Adsorbent Based on Polyacrylate Latex Solid Waste and Its Application in the Treatment of Dye Wastewater

Solidification treatment effect of wellsite waste mud based on physical adsorption of a composite curing agent

Development of porous and reusable geopolymer adsorbents for dye wastewater treatment

Pore structure evolution and adsorption behaviors of porous poly (vinyl alcohol) hydrogel prepared using Na2SO4 and CaCO3 as porogens

Preparation of Novel Spherical PVA/ATP Composites with Macroreticular Structure and Their Adsorption Behavior for Methylene Blue and Lead in Aqueous Solution

Fabrication porous adsorbents templated from aqueous foams using astragalus membranaceus and attapulgite as stabilizer for efficient removal of cationic dyes

Adsorption of inorganic and organic phosphorus onto polypyrrole modified red mud: Evidence from batch and column experiments

Highly efficient macroporous adsorbents for toxic metal ions in water systems based on polyvinyl alcohol–formaldehyde sponges

Preparation and Characterization of Red Mud-Based Geopolymer Composited with Rice Husk Ash for the Adsorption of Bromocresol Green in Aqueous Solution

Preparation of a Low-Cost Adsorption Material from Red Mud and Bagasse

Fabrication of porous adsorbents from eco-friendly aqueous foam for high-efficient removal of cationic dyes and sustainable utilization assessment

Hydrothermal chemical modification of red mud for efficient adsorption of methylene blue

Self-assembled electrospun PVA/CMC/PEO composite fiber film material with enhanced dye adsorption performance for wastewater treatment

Characterization of phosphate modified red mud–based composite materials and study on heavy metal adsorption

Preparation of polyvinyl alcohol hydrogel modified with environment-friendly pomegranate peel polyphenols: An efficient and regenerative adsorbent for Congo red adsorption

A Study on the Removal Characteristics and Mechanism of Phosphorus from Simulated Wastewater Using a Novel Modified Red-Mud-Based Adsorption Material

Adsorptive behaviors and mechanisms for removing three organic pollutants from aqueous solutions by polyvinyl alcohol/porous carbon composite hydrogels

Facile construction of superhydrophobic porous red mud/slag-based geopolymer for thermal insulation and oil/water separation