Abstract:The chemical foaming technique is possibly the most common method of producing porous geopolymers. Despite this, to date, the role of the content and type of surfactant on the pore size distribution of porous geopolymers is not fully perceived, as constant surfactant dosages are usually employed. In addition, the comparison of literature studies is challenging since a distinct mixture of designs is employed. This investigation intends to provide additional insights on the topic, focusing on synthesizing red mud/metakaolin geopolymer foams and envisioning their use in thermal insulating applications. Various mixtures were prepared using three commercially available surfactants, namely Hostapur OSB, sodium dodecyl sulfate (SDS), and Triton X114. The content of the surfactant (0.025, 0.05, and 0.075 wt.%) and the amount of the foaming agent (aluminum powder, Al; 0.05, 0.075, and 0.10 wt.%) was modified, keeping the binder composition constant and the physical properties of the produced geopolymers were characterized. Results show that the combination between sodium dodecyl sulfate (0.025 wt.%) and aluminum (0.10 wt.%) leads to the strongest reduction in the foam density, the lowest value here reported being -400 kg/m3. On the other hand, samples produced with Hostapur OSB have much higher open porosity (up to 47.7%) and water absorption (up to 80.4%) values, showing that this surfactant leads to a pore network with higher connectivity. In addition, the microstructure of the foams, particularly pore morphology (size and shape) and connectivity between the produced pores are highly dependent on the type of surfactant, sodium dodecyl sulfate generating coarser pore size distribution with round, but mostly closed pores, while a narrower pore size distribution coupled with smaller size pores is seen with the Hostapur. These results suggest the feasibility of tuning the foams' properties (porosity and mechanical performance) according to the application by the proper combination of the type of surfactant and their concentration, enabling their use as thermal and acoustic insulators or as filters/membranes in wastewater treatment systems.

Facile construction of superhydrophobic porous red mud/slag-based geopolymer for thermal insulation and oil/water separation

Geopolymerization of Red Mud and Rice Husk Ash and Potentials of the Resulting Geopolymeric Products for Civil Infrastructure Applications

Development of a facile and robust silicomanganese slag-based geopolymer membrane for oil/water separation

Feasibility study of red mud-blast furnace slag based geopolymeric grouting material: Effect of superplasticizers

Synergistic utilization of industrial waste red mud and rice husk ash for eco-friendly geopolymer preparation: enhancing strength and mitigating hazardous leaching

Green transformation of oily sludge through geopolymer: Material properties and hydration mechanisms

Preparation and Research on Mechanical Properties of Eco-Friendly Geopolymer Grouting Cementitious Materials Based on Industrial Solid Wastes

Utilization of municipal solid waste incineration fly ash with red mud-carbide slag for eco-friendly geopolymer preparation

Preparation mechanism and properties of thermal activated red mud and its geopolymer repair mortar

Evaluation of the Nature and Concentration of the Surfactant on the Properties of Red Mud/Metakaolin Porous Geopolymers Foamed with Aluminium

Multifunctional superhydrophobic coating constructed from rosin-based polymer and nano-boehmite particles for oil-water separation, flame retardancy and anti-icing

Synthesis and Characterization of Red Mud and Rice Husk Ash-Based Geopolymer Composites

Facile Synthesis of Polymer-Reinforced Silica Aerogel Microspheres as Robust, Hydrophobic and Recyclable Sorbents for Oil Removal from Water

Immobilizatiaon of heavy metals in municipal solid waste incineration fly ash with red mud-coal gangue

Preparation and Properties of Porous Concrete Based on Geopolymer of Red Mud and Yellow River Sediment

A Novel Method of Synthesizing Polymeric Aluminum Ferric Sulfate Flocculant and Preparing Red Mud-Based Ceramsite

Preparation and characterization of red mud/polysulfone composite geosynthetic barrier

Preparation and Immobilization Mechanism of Red Mud/Steel Slag-Based Geopolymers for Solidifying/Stabilizing Pb-Contaminated Soil

Synthesis, Characterization, and Mechanical Properties of Red Mud–Based Geopolymers

Construction of superhydrophobic flexible polyurethane with dual nano-enhancement effect for solar-assisted high-viscosity oil cleanup and oil-water separation

Green Protective Geopolymer Coatings: Interface Characterization, Modification and Life-Cycle Analysis