Abstract:This paper studies control strategies for an AC/AC system based on a modular multilevel matrix converter (M3C) when an asymmetric fault occurs in the secondary side ac system. Firstly, the operating principle of M3C is briefly introduced and verified by simulation. Then, based on its mathematical model by double αβ0 transformation, the decoupled control strategies for the primary side and secondary side systems are designed. In view of the asymmetric fault condition of the secondary side system, the positive sequence and negative sequence components of voltages and currents are separated and extracted, and then a proportional resonant controller (PR) is used to regulate the positive and negative sequence currents at the same time to realize decoupled current control in the αβ reference frames. The capacitor voltage balancing control, which consists of an inter-subconverter balancing control and an inner-subconverter balancing control, is realized by adjusting four circulating currents. Finally, the proposed control strategy is validated by simulation in the PSCAD/EMTDC software (Manitoba HVDC Research Center, Canada). The result shows that during the period of the BC-phase short-circuit fault occurring in the secondary side system, the whole system can still operate stably and transmit a certain amount of active power, according to their set values. Furthermore, the capacitor voltages are balanced, with a slight increase during the fault period. The simulation results verify the effectiveness of the proposed control strategy.

Direct Current Control and Experiment of a Novel 9-Level Modular Multilevel Converter

Static and Dynamic Characteristics of a Novel STATCOM Based on Modular Multilevel Converter

STATCOM Based on Modularized Multilevel Converters

Fault-tolerant Design and Control of Modular Multilevel Converter-Based STATCOM

An Improved Nearest-Level-Modulation Of Modular Multilevel Converter - Statcom

Analysis Of Hybrid Cascaded Multilevel Converter Based Statcom

Introduction, Modeling and Simulation of Modular Multilevel Converter

A Rotation-Based Capacitor-Voltage-balancing Method for Modular Multilevel Converters

Modulation and Control of a New Alternate Arm Multilevel Converter for High-Voltage Direct Current System with Direct Current Fault Ride-Through Capability

Optimization Design of STATCOM Based on Hybrid Cascaded Multilevel Converter

Modeling, Simulation and Control Strategy of a Novel 10 Kv 15-Level M-STATCOM under SVG Condition

A Capacitor Voltage Balancing Method for a Modular Multilevel DC Transformer for DC Distribution System

Study of a novel STATCOM based on modular multilevel inverter

Analysis and Control of STATCOM Based on Modular Multilevel Converters

Capacitance Reduction Control for Sub-module of Modular Multilevel Converter Applied in Wind Power Generation

Closed-Loop Decoupled Control and Implementation of the Modular Multilevel Matrix Converter in Similar/Equal Frequency Operation

A Novel Multi-Module Parallel Multilevel Current-Source Converter for Super-conducting Magnetic Energy Storage System

Study of Unbalanced Circular Current Suppressing for Modular Multilevel Converter

Research on an Asymmetric Fault Control Strategy for an AC/AC System Based on a Modular Multilevel Matrix Converter

A Novel CCSC for Circulating Current Suppression in Modular Multilevel Converters

Low Frequency Operation Control Method for Modular Multilevel Converter Based on Improved Arm Current Prediction