Fatigue Analysis of Adhesively Bonded Single Lap Joints under Vibration Loads

Jian Pang,Yu Du,Kunyue Wu,Ping Hu,Weidong Li

DOI: https://doi.org/10.1080/00218464.2013.764829

2013-01-01

Abstract:Many structural applications of adhesive joints experience vibration loads. The dynamic loads due to vibration motions are therefore one of the primary causes for structural damage, especially when the outside cyclic stir vibration frequency is adjacent to the natural frequencies of the adhesive joint frame. This is so called the vibration fatigue. In this paper, the fatigue behavior of adhesively bonded single lap joint (SLP) subject mainly to normal stresses induced by vibration excitations is investigated. Combining with static tests, the NI PXI-1045 vibration measurement and analysis system are used to analyze the effect of vibration loading on the fundamental modal frequency with long-term fatigue cycle. Furthermore, a virtual fatigue analysis approach for the fatigue damage prediction of adhesive joints subject to vibration loads is performed in this study. It is found that the joint stiffness decreases with the cyclic durations under which the vibration loads are applied. As a result, a stable decrease of the fundamental resonance frequency of the joint structure is observed during the tests. The experimental data demonstrate a significant correlation between the shear strength of adhesive joints and the vibration cycling time. A gradual decrease in the shear strength with increasing load cycles is seen in vibration fatigue, the maximum shear strength of adhesively bonded joints drops about 12% after 1.35e8 cycles. Based on the test data, a new approach called virtual fatigue analysis modeling (VFAM) is proposed for the fatigue damage of the adhesive joints under vibration loads. The VFAM shows that the fatigue damage occurs first at the end of the overlap area of the adhesive layer.