Abstract:The traction converter modulation generates switching-frequencies current harmonics. The trapped filters can eliminate these switching harmonics, reducing total inductance and filter size. Nonetheless, in comparison with the typical inductor-capacitor-inductor ( LCL ) filter, the trap inductor needs a larger magnetic core. Moreover, the trapped filter has not been analyzed in the traction systems. This paper proposes a magnetic integrated inductor-trap-inductor ( LLCL ) filter to decrease the filter's size and investigate its application in traction converters. In fact, the application range of this filter is quite broad, and it can be used in various electrical power systems, including industrial power systems, renewable energy systems, transportation systems, and building power systems. The LC -trap may be formed by connecting the equivalent trap inductor, introduced through the magnetic coupling between inverter-side and grid-side inductors, in series with the filter capacitor. Furthermore, for H-bridge unipolar pulse width modulation (PWM) traction converters, the prominent switching harmonics are concentrated at the double switching frequencies. Therefore, the stability zone is expanded by moving the resonance above the Nyquist frequency. The presented filter's features and design are thoroughly analyzed. The proposed method is finally validated by the MATLAB/Simulink simulation and hardware-in-the-loop (HIL) experimental results. Compared to the discrete windings, the integrated ones can save two magnetic cores. Furthermore, the proposed filter can meet IEEE criteria with 0.3% for all the harmonics and total harmonic distortion (THD) of 2.15% of the grid‐side current.

Harmonic Suppression in Electric Traction System Based on a Single-Phase Hybrid Active Filter

Hybrid Frame-Based Current Control Scheme for LC-Equipped PMSM with Non-Sinusoidal Back-EMF

High-Performance Resonant Controller For Active Power Filter With Selective Harmonic Compensation

A Hybrid Static Compensator for Dynamic Reactive Power Compensation and Harmonic Suppression

Hybrid Var and Harmonic Dynamic Compensator and Application to Three-two Phase Traction Substation

Active Power Filter for Harmonie Compensation Using a Digital Dual-Mode-structure Repetitive Control Approach

Harmonic Transmission Characteristic and Suppression of Unbalanced Power System

A Multi-Frequency Harmonic Generator Based on the Voltage Source Converter for Traction Power Load Impedance Identification

High-frequency harmonics suppression in high-speed railway through magnetic integrated LLCL filter

A Discrete Frequency Tuning Active Filter for Power System Harmonics

An Improved Harmonic Detection Based On Lead Compensation For Active Power Filter

New Hybrid Active Power Filter with Low Additive Reactive Current Injection

Design of Hybrid Power Filters for Supraharmonics Suppression in Power Electronics Dominated Power Systems

Passive Filter Design for China High-Speed Railway With Considering Harmonic Resonance and Characteristic Harmonics

A Hybrid Solution To Active Power Filter For The Purpose Of Harmonic Suppression And Resonance Damping

Analysis of Harmonic Resonance for Locomotive and Traction Network Interacted System Considering the Frequency-Domain Passivity Properties of the Digitally Controlled Converter

Harmonic Cancellation for HVDC Using a Novel Control Scheme

A Harmonic Current Suppression Method for Single-Phase PWM Rectifier Based on Feedback Linearization

Interpolated Phase-Shifted PWM for Harmonics Suppression of Multilevel Hybrid Railway Power Conditioner in Traction Power Supply System

A Novel Control Strategy of Parallel Hybrid Active Power Filter

Study on a novel hybrid active power filter