Abstract:In this letter, a new method for liquid level measurement based on in-line Mach Zehnder interferometer (MZI) in fiber ring laser cavity is proposed and experimentally demonstrated. Two cascaded peanut-shaped fiber structures are designed to implement MZI with a length of 25 mm. At the beginning, the broadband light source was used to demonstrate the possibility of MZI as a liquid level sensor. The experimental results show that the liquid level sensitivity of -1.057 nm/cm can be achieved in the detection range of 0-20 mm. However, using broadband light sources to build a sensing system has a large 3-dB spectral bandwidth and low signal-to-noise ratio in the available wavelength range. Therefore, these sensing systems may have poor resolution, low accuracy monitoring and limited detection distance. Therefore, the experiment further uses the fiber ring laser (FRL) cavity to replace the broadband light source to realize the liquid level monitoring. Thanks to narrow laser linewidth and high signal-to-noise ratio, higher detection accuracy can be obtained. MZI acts as a filter and a sensor at the same time. When the liquid level changes, the interference peak shift plays the role of filtering and wavelength selection. The results showed that the detection sensitivity was as high as -1.348 nm/cm. Accompanied by a signal-to-noise ratio of up to 50 dB and a 3-dB linewidth of less than 0.2 nm. Besides, the fiber ring laser cavity can theoretically extend the length of single-mode fiber infinitely in the cavity. Hence, the sensor designed is exemplary and representative for liquid level monitoring in unconventional areas in the far field such as: extreme geological landforms, high temperature and high-pressure regions and anaerobic areas.

Dual-polarization DBR Fiber Laser Sensor for Liquid-Level Measurement

Highly sensitive liquid-level sensor based on dual-wavelength double-ring fiber laser assisted by beat frequency interrogation.

Dynamic Temperature Compensation Interrogation Technique for Liquid Level Sensors Array Based on Single-Longitudinal-Mode Dbr Fiber Laser

Liquid Level Sensor Using Fiber Bragg Grating Assisted by Multimode Fiber Core

Liquid Level Sensor Based on Fiber Ring Laser with Single-Mode-offset Coreless-Single-mode Fiber Structure

Liquid Level and Temperature Sensing by Using Dual-Wavelength Fiber Laser Based on Multimode Interferometer and FBG in Parallel

Power-type Liquid-Level Sensor for High Refractive Index Liquid Based on Long-Period Fiber Grating

Fiber Ring Cavity Laser Based on Cascading Two Peanut-Shape Structures for Liquid Level Measurement

Liquid-level Sensing Method Based on Differential Pulse-Width Pair Brillouin Optical Time-Domain Analysis and a Self-Heated High Attenuation Fiber.

Liquid-Level Sensor with A High-Birefringence-Fiber Loop Mirror

A High-Resolution Liquid-Level Sensor Based on Fabry–Perot Interferometer with Fiber Laser Intracavity Sensing

Liquid Level Measurement Sensor Using A Long-Period Fiber Grating

Distributed Bragg-Reflector Fiber-Laser Sensor For Lateral Force Measurement

Quasi-Distributed Optical Fiber Sensor for Liquid-Level Measurement

A Liquid-Level Sensing Technique Based on Differential Detection of Correlation Peaks from Broadband Chaos

Ultrasensitive Liquid Level Sensor Based on Slice-Shaped Composite Long Period Fiber Grating

High-Performance Dual-Frequency DBR Fiber Lasers for Sensing Applications

Ultra-high Sensitivity Liquid Level Sensor Based on CO2 Laser Local Refractive Index Curved Modulation Effect

Highly sensitive liquid-level sensor based on weak uniform fiber Bragg grating with narrow-bandwidth

Temperature-independent Fiber Bragg Grating Liquid-Level Sensor Based on Reflection Optical Power Detection

Implementation and Characterization of Liquid-Level Sensor Based on a Long-Period Fiber Grating Mach–Zehnder Interferometer