Lateral Resolution Enhancement in Confocal Microscopy with a Higher SNR

Cuifang Kuang,Yifan Wang,Zhaotai Gu,Shuai Li,Xu Liu

2012-01-01

Abstract:A method based on the subtraction of images under different pinhole sizes is proposed to improve the lateral resolution in confocal microscopy. An enhanced lateral resolution and a higher SNR are shown by experimental results.

What problem does this paper attempt to address?

A Novel Method for Enhancing the Lateral Resolution and Image SNR in Confocal Microscopy

Youhua Chen,Dazhao Zhu,Yue Fang,Cuifang Kuang,Xu Liu

DOI: https://doi.org/10.1016/j.optcom.2017.04.073

IF: 2.4

2017-01-01

Optics Communications

Abstract:There is always a tradeoff between the resolution and the signal-to-noise ratio (SNR) in confocal microscopy. In particular, the pinhole size is very important for maintaining a balance between them. In this paper, we propose a method for improving the lateral resolution and image SNR in confocal microscopy without making any changes to the hardware. By using the fluorescence emission difference (FED) approach, we divide the images acquired by different pinhole sizes into one image acquired by the central pinhole and several images acquired by ring-shaped pinholes. Then, they are added together with the deconvolution method. Simulation and experimental results for fluorescent particles and cells show that our method can achieve a far better resolution than a large pinhole and a higher SNR than a small pinhole. Moreover, our method can improve the performance of classic confocal laser scanning microscopy (CLSM) to a certain extent, especially CLSM with a continuously variable pinhole.
Image subtraction method for improving lateral resolution and SNR in confocal microscopy

Yifan Wang,Cuifang Kuang,Zhaotai Gu,

DOI: https://doi.org/10.1016/j.optlastec.2012.11.018

IF: 4.939

2013-01-01

Optics & Laser Technology

Abstract:A method based on the subtraction of images taken under different pinhole sizes is provided to improve the lateral resolution and SNR in confocal microscopy. Theoretical analyses have been performed and a notable enhancement in lateral resolution and SNR is shown by experimental results. Subtraction parameter and pinhole size have been discussed in detail. Compared with other resolution enhancement concepts, this method is much simpler and cheaper without using strong lasers. And it well suits for real time applications. It can be easily applied to a general confocal microscope and suitable for both fluorescence and non-fluorescence sample.
Contrast Reversal Confocal Microscopy

Xiang Hao,Cuifang Kuang,Zhaotai Gu,Shuai Li,Yanghui Li,Xu Liu

DOI: https://doi.org/10.1016/j.optcom.2013.02.036

IF: 2.4

2013-01-01

Optics Communications

Abstract:We propose a novel method to improve the lateral resolution of a general confocal laser scanning microscopy (CLSM) by 10–35%, which can be readily realized by manipulating the shape of the excitation focal spot to a doughnut one. As the contrast of image is reversed synchronously, the raw data is further handled by the deconvolution algorithm to convert the doughnut point spread function (PSF) to a peak-centered distribution, so that a more intuitive vision will be given. Depending on the strategies like saturation excitation or doughnut size shrinkage, the resolution can be further optimized. This setup is valid for diverse systems and may find use in a variety of applications.
Resolution enhancement of confocal scanning microscopy using low-intensity imaging part of point spread function

Vannhu Le,Xiaona Wang,Cuifang Kuang,Xu Liu

DOI: https://doi.org/10.1117/1.OE.57.5.053106

IF: 1.3

2018-01-01

Optical Engineering

Abstract:We introduce a phase mask with a left-handed azimuthal polarization to generate a special shape of point spread function. The proposed point spread function has low-intensity and small size in the central lobe. This central lobe of the point spread function is used to obtain an image on the detector, and therefore the lateral resolution is improved. The proposed method can achieve a remarkable improvement in the lateral resolution and the depth of field compared with conventional confocal scanning microscopy. The image simulation demonstrated that the images obtained by this proposed method have better imaging quality. (C) 2018 Society of Photo-Optical Instrumentation Engineers (SPIE)
Using subtraction strategy to enhance the resolution of concofcal microscopy

shuai li,xiang hao,cuifang kuang,xu liu,yifan wang

DOI: https://doi.org/10.1364/fio.2013.fw5a.1

2013-01-01

Abstract:We propose a method to enhance the resolution of microscopy by subtraction strategy. It is effective as a powerful supplement to most fluorescence microscopies, such as confocal microscope, and g-STED.
Resolution enhancement of confocal fluorescence microscopy via two illumination beams

Vannhu Le,Xiaona Wang,Cuifang Kuang,Xu Liu

DOI: https://doi.org/10.1016/j.optlaseng.2019.05.018

IF: 5.666

2019-01-01

Optics and Lasers in Engineering

Abstract:•A new method combining digital processing and FED method is proposed.•The method can improve the resolution of conventional confocal fluorescence microscopy.•The method reduces the information loss caused by subtraction in conventional FED method.
Axial Resolution Enhancement for Light Sheet Fluorescence Microscopy Via Using the Subtraction Method

Vannhu Le,Xiaona Wang,Cuifang Kuang,Xu Liu

DOI: https://doi.org/10.1117/1.oe.57.10.103107

IF: 1.3

2018-01-01

Optical Engineering

Abstract:Light sheet fluorescence microscopy is an imaging method in which the sample is illuminated from the side by a wide and relatively thin light sheet. This method minimizes the out-of-focus excitation, provides a good balance between spatial resolution and temporal resolution, and mitigates photobleaching and photodamage. Unfortunately, the axial resolution of light sheet fluorescence microscopy is much lower than lateral resolution, which limits the achievement of isotropic imaging. We propose to combine the subtraction method with light sheet fluorescence microscopy to improve the axial resolution. The experimental results demonstrate that the proposed method can produce higher axial resolution than that of conventional light sheet fluorescence microscopy. In addition, a way to reduce negative values in subtraction method is also discussed. (C) 2018 Society of Photo-Optical Instrumentation Engineers (SPIE)
A lateral differential confocal microscopy for accurate detection and localization of edge contours

Yifan Wang,Cuifang Kuang,Peng Xiu,Shuai Li,Xiang Hao,Xu Liu

DOI: https://doi.org/10.1016/j.optlaseng.2013.08.012

IF: 5.666

2014-01-01

Optics and Lasers in Engineering

Abstract:Common path noise and disturbance in light source and ambient lighting affect detection accuracy of edge contours greatly in optical microscopy. In order to solve this problem, a lateral differential confocal microscopy is proposed based on principle of lateral difference and confocal microscopy. The approach proposed uses confocal dual-receiving light path arrangement and real-time heterodyne subtraction of two signals with lateral offsets by a differential detector to improve the system′s accuracy and detection sensitivity. Theoretical analyses have been presented. In addition, a simple prototype system has been built based on theoretical analyses. Related experiments have been performed under laboratory conditions. Different from former image processing methods, common path noise and additive disturbance in light source and ambient lighting are eliminated before they are recorded. Theoretical analyses and experimental results indicate a more accurate and sensitive result.
Enhancing the Resolution and Contrast in CW-STED Microscopy

Yue Fang,Yifan Wang,Cuifang Kuang,Xu Liu

DOI: https://doi.org/10.1016/j.optcom.2014.02.042

IF: 2.4

2014-01-01

Optics Communications

Abstract:A new method based on the subtraction of images is proposed to enhance the resolution and contrast in CW-STED microscopy. It is realized by the subtraction of a confocal image from a STED image. Detailed theoretical analyses and a series of simulation tests are performed. The validity of this subtraction method in practice is demonstrated by experiments on both fluorescent nanoparticles and microtubule networks in which a better resolution and contrast than the STED image is achieved. Subtractive parameters are discussed in detail and a way of choosing the optimal value is proposed. Compared with other resolution enhancement concepts, this method is much simpler and free from using high intensity lasers.
Imaging Resolution and Properties Analysis of Super Resolution Microscopy with Parallel Detection under Different Noise, Detector and Image Restoration Conditions

Zhongzhi Yu,Shaocong Liu,Shiyi Sun,Cuifang Kuang,Xu Liu

DOI: https://doi.org/10.1080/09500340.2018.1428374

IF: 1.3

2018-01-01

Journal of Modern Optics

Abstract:Parallel detection, which can use the additional information of a pinhole plane image taken at every excitation scan position, could be an efficient method to enhance the resolution of a confocal laser scanning microscope. In this paper, we discuss images obtained under different conditions and using different image restoration methods with parallel detection to quantitatively compare the imaging quality. The conditions include different noise levels and different detector array settings. The image restoration methods include linear deconvolution and pixel reassignment with Richard-Lucy deconvolution and with maximum-likelihood estimation deconvolution. The results show that the linear deconvolution share properties such as high-efficiency and the best performance under all different conditions, and is therefore expected to be of use for future biomedical routine research.
Three-Dimension Resolution Enhanced Microscopy Based on Parallel Detection

Zhimin Zhang,Shaocong Liu,Minfei He,Yuran Huang,Cuifang Kuang,Yubing Han,Xiang Hao,Xu Liu

DOI: https://doi.org/10.3390/app11062837

2021-01-01

Abstract:Pixel reassignment image scanning microscopy (PRISM) is a useful tool to improve the resolution of confocal laser scanning microscopy (CLSM) only equipped with a detector array. However, while it can improve the lateral resolution, it has little effect on the axial resolution. Here, new microscopy has been proposed which combines three-dimension fluorescence emission difference microscopy (3D FED) with PRISM to further improve three-dimension resolution. We call this method three-dimension pixel reassignment fluorescence emission difference microscopy (3D-PRFED). Detailed theoretical analysis and simulation are presented in this paper. Additionally, the performance of lateral and axial resolution improvement of this method has been demonstrated by imaging 100 nm fluorescent beads and nuclear pore complexes samples. Experiment results show that this method in our system can improve lateral resolution by a factor of 1.85 and axial resolution by a factor of 1.48 compared with CLSM.
Image Scanning Difference Microscopy

Yuchen Chen,Shaocong Liu,Chengfeng Zhang,Zhimin Zhang,Cuifang Kuang,Xiang Hao,Xu Liu

DOI: https://doi.org/10.1111/jmi.12840

IF: 1.9522

2019-01-01

Journal of Microscopy

Abstract:Here, we propose a novel imaging method, which is called image scanning difference microscopy (ISDM), for superresolution imaging. In ISDM, we implement a detector array composed of 19 avalanche photodiodes (APD) rather than single‐point detector in standard confocal microscopy for reconstructing superresolved images with higher signal‐to‐noise ratio (SNR). Combining with our former proposed fluorescence emission difference (FED) method, we have achieved a lateral resolution of 111 nm (∼λ/6) without the damage of image quality, the highest FED resolution to the best of our knowledge. With its simple setup and remarkable performance, we believe that ISDM can become a versatile observation tool in biology and other fundamental studies.
Isotropic Superresolution Imaging for Fluorescence Emission Difference Microscopy

Shangting You,Cuifang Kuang,Zihao Rong,Xu Liu,Zhihua Ding

DOI: https://doi.org/10.1364/ao.53.007838

IF: 1.9

2014-01-01

Applied Optics

Abstract:Fluorescence emission diffraction microscopy (FED) has proven to be an effective sub-diffraction-limited imaging method. In this paper, we theoretically propose a method to further enhance the resolving capability of FED. Using a coated mirror and only one objective lens, this method achieves not only the same axial resolution as 4Pi microscopy but also a higher lateral resolution. The point spread function (PSF) of our method is isotropic. According to calculations, the full width at half-maximum (FWHM) of the isotropic FED’s PSF is 0.17λ along all three spatial directions. Compared with confocal microscopy, the lateral resolution is improved 0.7-fold, and the axial resolution is improved 3.1-fold. Simulation tests also demonstrate this method’s advantage over traditional microscopy techniques.
Resolution Enhancement of Saturated Fluorescence Emission Difference Microscopy

Guangyuan Zhao,Cuifang Kuang,Zhihua Ding,Li Xu

DOI: https://doi.org/10.1364/oe.24.023596

IF: 3.8

2016-01-01

Optics Express

Abstract:Fluorescence emission difference microscopy (FED) obtains resolution-enhanced images by subtracting acquired solid and doughnut confocal images. Because of the mismatch of the outer contours of the two subtraction components, negative values are inevitable in the conventional FED method, giving rise to deformations. In this study, by using a saturation effect, we obtain imaging results with a profile-extended solid and center-shrunken doughnut point spread function. Owing to the nonlinear effect, two better-matched saturated images not only eliminate the deformations, but also enhance the resolving ability and signal to noise ratio compared to conventional FED. Simulations based on the saturated model of rhodamine 6G, as well as experiments on biological samples, are presented to verify the capability of the proposed concept, while experimental results show the unprecedented resolving ability of the saturated FED method.
Image Scanning Fluorescence Emission Difference Microscopy Based On A Detector Array

Y. Li,S. Liu,D. Liu,S. Sun,C. Kuang,Z. Ding,X. Liu

DOI: https://doi.org/10.1111/jmi.12538

IF: 1.9522

2017-01-01

Journal of Microscopy

Abstract:We propose a novel imaging method that enables the enhancement of three-dimensional resolution of confocal microscopy significantly and achieve experimentally a new fluorescence emission difference method for the first time, based on the parallel detection with a detector array. Following the principles of photon reassignment in image scanning microscopy, images captured by the detector array were arranged. And by selecting appropriate reassign patterns, the imaging result with enhanced resolution can be achieved with the method of fluorescence emission difference. Two specific methods are proposed in this paper, showing that the difference between an image scanning microscopy image and a confocal image will achieve an improvement of transverse resolution by approximately 43% compared with that in confocal microscopy, and the axial resolution can also be enhanced by at least 22% experimentally and 35% theoretically. Moreover, the methods presented in this paper can improve the lateral resolution by around 10% than fluorescence emission difference and 15% than Airyscan. The mechanism of our methods is verified by numerical simulations and experimental results, and it has significant potential in biomedical applications.
Three-Dimensional Resolution and Contrast-Enhanced Confocal Microscopy with Array Detection

Baoliang Ge,Yifan Wang,Yujia Huang,Cuifang Kuang,Yue Fang,Peng Xiu,Zihao Rong,Xu Liu

DOI: https://doi.org/10.1364/ol.41.002013

IF: 3.6

2016-01-01

Optics Letters

Abstract:What we believe is a novel method for improving confocal microscopy's resolution and contrast in 3D space is proposed. Based on a conventional confocal microscopy setup, we use an array detector composed of 32 photomultiplier tubes (PMTs) to replace one point-detector, where the location offset of each PMT caused a different effective point spread function (PSF). By applying array detection and the fluorescence emission difference method of an image with a solid PSF and another with a donut-shaped PSF, we can enhance lateral resolution about 27% in real time with only one scan, and improve the axial resolving ability by about 22% simultaneously. Experimental results of both fluorescent beads and living cells are presented to verify the applicability and effectiveness of our method.
Dual-color Super-Resolution Imaging by Fluorescence Emission Difference Microscopy

Wensheng Wang,Yifan Wang,Cuifang Kuang,Xu Liu

DOI: https://doi.org/10.1364/isa.2016.it1f.4

2016-01-01

Abstract:Fluorescence emission difference microscopy(FED) has been demonstrated to be capable of breaking the diffraction limit through the difference of two different confocal images. Here we propose and build a novel dual-color FED system that can provide fluorescence imaging with sub-diffraction resolution. The enhancement in the lateral resolution is verified theoretically and experimentally. Compared to standard STED system, FED enjoys the advantages of lower illumination power and higher flexibility. In addition, the dual-color configuration enables the presented system to be suitable for biological investigations.
Improvements of Axial Resolution in Confocal Microscopy with Fan-Shaped Apertures.

Ye Ma,Cuifang Kuang,Wei Gong,Xue Li,Yao Zheng,Yifan Wang,Ke Si,Li Xu

DOI: https://doi.org/10.1364/ao.54.001354

IF: 1.9

2015-01-01

Applied Optics

Abstract:Based on diffraction theory, this paper theoretically demonstrates improvements in axial resolution in confocal microscopy with fan-shaped apertures. It provides the optimal geometric parameters of the fan-shaped pupils to give the maximum axial resolution for a given pinhole size. To fully understand the overall performance, the signal-to-background ratio and the signal level with regard to the geometric parameters are discussed.
Optimization for Imaging Through Scattering Media for Confocal Microscopes with Divided Elliptical Apertures.

Hengjie Tang,Chenxue Wu,Wei Gong,Yao Zheng,Xinpei Zhu,Jiahao Wang,Ke Si

DOI: https://doi.org/10.1002/jbio.201700293

IF: 3.3899

2018-01-01

Journal of Biophotonics

Abstract:We develop a confocal system equipped with optimal elliptical apertures to improve axial point spread function and signal-to-background ratio (SBR) for different detector sizes. By adjusting the parameters of the elliptical apertures, the axial half width at half-maximum can be reduced to 4.986 (described in optical coordinates) and SBR can be improved to 0.176. We evaluate this system with the 1951 USAF resolution test chart and the primary cultured neuron from SD rat stained by Map-2, and observe better imaging performance, which indicates the potential applications in biological science.

Lateral Resolution Enhancement in Confocal Microscopy with a Higher SNR

A Novel Method for Enhancing the Lateral Resolution and Image SNR in Confocal Microscopy

Image subtraction method for improving lateral resolution and SNR in confocal microscopy

Contrast Reversal Confocal Microscopy

Resolution enhancement of confocal scanning microscopy using low-intensity imaging part of point spread function

Using subtraction strategy to enhance the resolution of concofcal microscopy

Resolution enhancement of confocal fluorescence microscopy via two illumination beams

Axial Resolution Enhancement for Light Sheet Fluorescence Microscopy Via Using the Subtraction Method

A lateral differential confocal microscopy for accurate detection and localization of edge contours

Enhancing the Resolution and Contrast in CW-STED Microscopy

Imaging Resolution and Properties Analysis of Super Resolution Microscopy with Parallel Detection under Different Noise, Detector and Image Restoration Conditions

Three-Dimension Resolution Enhanced Microscopy Based on Parallel Detection

Image Scanning Difference Microscopy

Isotropic Superresolution Imaging for Fluorescence Emission Difference Microscopy

Resolution Enhancement of Saturated Fluorescence Emission Difference Microscopy

Image Scanning Fluorescence Emission Difference Microscopy Based On A Detector Array

Three-Dimensional Resolution and Contrast-Enhanced Confocal Microscopy with Array Detection

Dual-color Super-Resolution Imaging by Fluorescence Emission Difference Microscopy

Improvements of Axial Resolution in Confocal Microscopy with Fan-Shaped Apertures.

Optimization for Imaging Through Scattering Media for Confocal Microscopes with Divided Elliptical Apertures.