Broadband and Polarization-Independent Solar Absorber Based on Plasmonic Coaxial Tapered Holes

Lei Mo,Liu Yang,Sailing He

DOI: https://doi.org/10.1364/acpc.2012.ath2f.2

2012-01-01

Abstract:We proposed a novel solar absorber based on plasmonic coaxial tapered holes. Absorption of over 88% was obtained in a broad wavelength range without dependence on polarization. Absorption enhancement mechanisms were explained in detail.

What problem does this paper attempt to address?

Ultrabroadband and Omnidirectional Absorbers Based on a Tandem Multilayer Structure

Chenying Yang,Chengang Ji,Weidong Shen,Kyu-Tae Lee,Yueguang Zhang,Xu Liu,L. Jay Guo

DOI: https://doi.org/10.1364/oic.2016.md.4

2016-01-01

Abstract:We propose a novel scheme for ultrabroadband and omnidirectional absorbers featuring a tandem structure of various absorptive materials and graded index profile. They show an average absorption of 98% over 400-2000nm and >93% for 400-3500nm range.
Enhanced Broadband Absorption in Gold by Plasmonic Tapered Coaxial Holes

Lei Mo,Liu Yang,Achim Nadzeyka,Sven Bauerdick,Sailing He

DOI: https://doi.org/10.1364/oe.22.032233

IF: 3.8

2014-01-01

Optics Express

Abstract:Gold absorbers based on plasmonic tapered coaxial holes (PTCHs) are demonstrated theoretically and experimentally. An average absorption of over 0.93 is obtained theoretically in a broad wavelength range from 300 nm to 900 nm without polarization sensitivity due to the structural symmetry. Strong scattering of the incident light by the tapered coaxial holes is the main reason for the high absorption in the short wavelength range below about 550 nm, while gap surface plasmon polaritons propagating along the taper dominate the resonance-induced high absorption in the long wavelength range. Combining two PTCHs with different structural parameters can further enhance the absorption and thus increase the spectral bandwidth, which is verified by a sample fabricated by focused ion beam milling. This design is promising to be extended to other metals to realize effective and efficient light harvesting and absorption.
Broadband selective solar absorber based on dielectric-filled anti-reflection coated film-coupled two-dimensional metallic photonic crystals

Hui Li,Dong Wu,Yumin Liu,Chang Liu,Jing Li,Zenghui Xu,Liu Yang,Zhongyuan Yu,Li Yu,Han Ye

DOI: https://doi.org/10.7567/jjap.57.110303

IF: 1.5

2018-10-16

Japanese Journal of Applied Physics

Abstract:We propose and numerically demonstrate a highly efficient solar absorber based on dielectric-filled anti-reflection coated film-coupled two-dimensional metallic photonic crystals. The proposed solar absorber has a polarization-independent high absorptivity above 95% in the range of 0.33–1.45 µm with insensitivity to incident angle of light as large as 50°. In the range beyond 2.2 µm, the thermal emissivity of this structure is below 20%, which shows its strong absorption selectivity. The efficient light harvesting property of the proposed solar absorber can be attributed to the anti-reflection mode, cavity resonance and coupled surface plasmon polaritons.

physics, applied
Plasmonic Nanostructures for Broadband Solar Absorption Based on Synergistic Effect of Multiple Absorption Mechanisms

Junli Su,Dingquan Liu,Leihao Sun,Gang Chen,Chong Ma,Qiuyu Zhang,Xingyu Li

DOI: https://doi.org/10.3390/nano12244456

IF: 5.3

2022-12-15

Nanomaterials

Abstract:The growing attention to solar energy has motivated the development of highly efficient solar absorbers. In this study, a high-performance meta-structure solar absorber (MSSA) based on a tungsten truncated cone structure combined with a film resonator structure has been proposed and demonstrated numerically. The designed structure exhibits over 97.1% total solar absorption efficiency and less than 8.5% total thermal emissivity under the condition of one solar concentration, hence reaching 91.6% photothermal conversion efficiency at 100 °C. In addition, the proposed MSSA achieves promisingly high spectrum absorptance of over 97.8% in the ultraviolet, visible and near-infrared regions (280–1700 nm). Based on the simulation analysis, the enhanced light absorption is attributed to the synergistic effect of the magnetic polaritons (MPs) on the nanostructured metal surface, the cavity plasmon resonance between the truncated cones that can form light-trapping structures, the magnetic field resonance of the metal–insulator–metal (MIM) optical resonator and the inherent loss of tungsten. The impedance of the absorber is well matched with free space. Furthermore, the optimized absorber shows great potential in solar thermophotovoltaic applications that require wide-angle polarization-independent ultra-broadband light response characteristics.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Double-sided Polarization-Independent Plasmonic Absorber at Near-Infrared Region.

Shuowei Dai,Ding Zhao,Qiang Li,Min Qiu

DOI: https://doi.org/10.1364/oe.21.013125

IF: 3.8

2013-01-01

Optics Express

Abstract:A double-sided polarization-independent plasmonic absorber is proposed and numerically investigated. Distinct from previously studied absorbers, it could absorb light incident from both sides of the surface through an ultrathin three-layer metal-insulator-metal nanostructure. Patterned metal particles are adopted instead of metal films in this absorber. It shows a high absorbance over a wide incident-angle range at near-infrared region. For electromagnetic waves incident from different sides of the structure, the maximum absorption locates at different wavelengths due to asymmetry. The effective medium theory demonstrates that the whole structure exhibits different impedances for both top and bottom incidences. This double-sided-absorption characteristic could lead to potential applications in thermal emitters, sensing, etc.
Broadband Tunability of Polarization-Insensitive Absorber Based on Frequency Selective Surface

Han Wang,Peng Kong,Wentao Cheng,Wenzong Bao,Xiaowei Yu,Ling Miao,Jianjun Jiang

DOI: https://doi.org/10.1038/srep23081

IF: 4.6

2016-01-01

Scientific Reports

Abstract:An innovative tunable and polarization-insensitive 1.6–8 GHz frequency selective surface (FSS) absorber was investigated in this study. The proposed FSS, which is in 4-axial symmetrical form, includes a novel array of PIN diodes with biasing lines including inductors. A gradually reduced equivalent resistor of PIN diodes can be achieved with increasing DC voltage, which characterizes tunable, multi-resonance absorption peaks. Via this simplified design, small value resistor and equivalent capacitance of the gap between patterns can improve the absorber’s performance in low frequencies; an active tunable absorber can be realized in a broad frequency range by employing adjustable devices. Changing the working state of the PIN diode allows the user to obtain strong absorption within the desired frequency. We analyzed the performance of the proposed absorber and found that it indeed shows very favorable absorption performance in low frequency (−10 dB in 1.6−4.3 GHz) and wideband (−8 dB in 4.3−5.4 GHz and −10 dB in 5.4−8.0 GHz) conditions. Calculation and simulation results also illustrated that the absorber is entirely polarization-insensitive.
Multilayer stacked ultra-wideband perfect solar absorber and thermal emitter based on SiO2-InAs-TiN nanofilm structure

Peng Chen,Qianju Song,Can Ma,Zao Yi,Liang Bian,Shubo Cheng,Zhiqiang Hao,Tangyou Sun,Pinghui Wu,Qingdong Zeng

DOI: https://doi.org/10.1039/d4dt01626b

2024-07-23

Abstract:In this paper, a broadband solar absorber is constructed and simulated based on the finite difference time domain method (FDTD). The modeled structure of the absorber consists of cyclic stacking of five absorber cells with different periods on refractory metal W, where a single absorber cell is composed of a three-layer SiO2-InAs-TiN square film. Due to the Fabry-Perot resonance and the surface plasmon resonance (SPR), an absorptivity greater than 90% within a bandwidth of 2599.5 nm was achieved for the absorber. Notably, one of these bands, 2001 nm, is a high-efficiency absorption with an absorption rate greater than 99%. The average absorption efficiency reaches 99.31% at an air mass of 1.5 (AM 1.5), and the thermal radiation efficiencies are 97.35% and 97.83% at 1000 K and 1200 K, respectively. At the same time, the structure of the absorber is also polarization-independent, and when the solar incidence angle is increased to 60°, it still achieves an average absorption of 90.83% over the entire wavelength band (280 nm to 3000 nm). The novelty of our work is to provide a design idea based on a unit structure with multiple cycles, which can effectively expand the absorption bandwidth of the absorber in the visible-near-infrared wavelengths. The excellent performances make the structure widely used in the field of solar energy absorption.
Broadband solar energy absorber based on monolayer molybdenum disulfide using tungsten elliptical arrays

Jiakun Li,Xifang Chen,Zao Yi,Hua Yang,Yongjian Tang,Yong Yi,Weitang Yao,Junqiao Wang,Yougen Yi

DOI: https://doi.org/10.1016/j.mtener.2020.100390

IF: 9.257

2020-06-01

Materials Today Energy

Abstract:Solar energy as an inexhaustible source of clean energy has attracted more and more attention. As an important way to collect source of energy, solar absorber is widely reported and studied. However, how to efficiently absorb the solar energy in the solar radiation range is a long-term perplexing problem. In this work, we propose a new type of broadband solar energy absorber based on monolayer molybdenum disulfide (MoS2). Tungsten (W) elliptical arrays are introduced into the structure to enhance its absorption. By exciting local surface plasmon resonance (LSPR) between monolayer MoS2 and tungsten elliptical arrays, ultra-broadband solar energy absorber with high absorption rate is obtained. Theoretical calculation by a finite-difference time-domain method (FDTD) shows that absorption with a bandwidth of 1750 nm from about 280 nm to 2030 nm has been achieved. The peak values of resonance wavelength at 1275 nm and 1885 nm are both greater than 99%. Our absorber also has good polarization independence and incidence insensitivity, which provides a theoretical basis for its work in the actual solar environment and possibilities for its application in other solar devices. The inspiration for proposed absorber can also be applied to other transition-metal dichalcogenides (TMDCs).

materials science, multidisciplinary,chemistry, physical,energy & fuels
Quasiperiodic metamaterials empowered non-metallic broadband optical absorbers

Chao Dong,Ke-Sheng Shen,Yun Zheng,Hong-Chao Liu,Jun Zhang,Shi-Qiang Xia,Feng Wu,Hai Lu,Xian-Zhou Zhang,Yu-Fang Liu

DOI: https://doi.org/10.1364/OE.423353

IF: 3.8

2021-01-01

Optics Express

Abstract:Realizing a polarization-insensitive broadband optical absorber plays a key role in the implementation of microstructure optoelectrical devices with on-demand functionalities. However, the challenge is that most of these devices involve the constituent metals, thus suffering from poor chemical and thermal stability and a complicated manufacturing process. In addition, the extreme contrast between the negative (metallic) and positive (dielectric) real parts of the constituent permittivities can cause additional problems in the design of structural devices. Based on these facts, this work proposes a design of planar broadband one-dimensional structure based on Fibonacci geometry. Experimental results show that the proposed planar structure exhibits high absorptivity behavior independent of polarization and angle in the wavelength range of 300-1000 nm. The absorptivity remains more than 80% when the incident angle is 60 degrees. This proof-of-concept represents a new strategy for realizing non-metallic broadband optical absorbers with advantages of polarization-independence, low-cost, and wide-field-of-view and paves the way for light manipulation under harsh conditions. (C) 2021 Optical Society of America under the terms of the OSA Open Access Publishing Agreement
Metasurface Broadband Solar Absorber

A. K. Azad,W. J. M. Kort-Kamp,M. Sykora,N. R. Weisse-Bernstein,T. S. Luk,A. J. Taylor,D. A. R. Dalvit,H.-T. Chen

DOI: https://doi.org/10.1038/srep20347

2015-09-23

Abstract:We demonstrate a broadband, polarization independent, omnidirectional absorber based on a metallic metasurface architecture, which accomplishes greater than 90% absorptance in the visible and near-infrared range of the solar spectrum, and exhibits low emissivity at mid- and far-infrared wavelengths. The complex unit cell of the metasurface solar absorber consists of eight pairs of gold nano-resonators that are separated from a gold ground plane by a thin silicon dioxide spacer. Our experimental measurements reveal high-performance absorption over a wide range of incidence angles for both s- and p-polarizations. We also investigate numerically the frequency-dependent field and current distributions to elucidate how the absorption occurs within the metasurface structure. Furthermore, we discuss the potential use of our metasurface absorber design in solar thermophotovoltaics by exploiting refractory plasmonic materials.

Optics
Ultra-broadband and wide-angle absorber based on TiN metamaterial for solar harvesting

Chunlei Sun,Haotuo Liu,Bing Yang,Kaihua Zhang,Bin Zhang,Xiaohu Wu

DOI: https://doi.org/10.1039/d2cp04976g

IF: 3.3

2022-12-02

Physical Chemistry Chemical Physics

Abstract:The efficient absorption of solar spectrum radiation is the most critical step in solar thermal utilization. In this work, a near-perfect metamaterial solar absorber with broadband, wide angle, polarization insensitivity, and high-temperature resistance is proposed and investigated. The absorber takes advantage of the high melting point material, which consists of TiN reflector, SiO2 insulating layer, and TiN rings array. In the spectral range of 300-2500 nm, an average absorption of 97.6% is achieved. The percentage of energy absorption in the AM1.5 spectral radiation can reach 95.8%. The electric and magnetic field distributions show that the high absorption is attributed to the coupling effect of surface plasmon resonance, guided mode resonance and cavity resonance. Furthermore, the absorber is found to maintain high absorption performance at large angles of solar radiation and to be insensitive to polarization. The designed absorber maintains its broadband absorption performance well within certain geometric tolerances. This reduces the complexity and cost of manufacturing and facilitates practical applications. The research indicates that this work will benefit the design and application of solar thermal conversion and thermophotovoltaic systems.

chemistry, physical,physics, atomic, molecular & chemical
Ultra-Broadband, Omnidirectional, High-Efficiency Metamaterial Absorber for Capturing Solar Energy

Jing-Hao Wu,Yan-Long Meng,Yang Li,Yi Li,Yan-Song Li,Gui-Ming Pan,Juan Kang,Chun-Lian Zhan,Han Gao,Bo Hu,Shang-Zhong Jin

DOI: https://doi.org/10.3390/nano12193515

IF: 5.3

2022-10-08

Nanomaterials

Abstract:In this study, we investigated an absorber based on a center-aligned tandem nanopillar array for ultra-broadband solar energy harvesting theoretically. A high-efficiency, omnidirectional absorber was obtained by introducing the center-aligned tandem nanopillar array embedded in an Al2O3 dielectric layer. The multi-coupling modes at different wavelengths were interpreted. The strong absorption can be adjusted by changing the radii and heights of nanopillars. According to the simulation results, the average absorptance of the absorber exceeded 94% in the wavelength range from 300 nm to 2000 nm. In addition, the high-efficiency absorption was insensitive to the incident angle and polarization state. The research not only proposed an absorber which possesses a huge potential value for application areas, such as thermal photovoltaic systems, infrared detection, and isotropic absorption sensors, but also pointed out a new way to design an absorber with high efficiency in an ultrabroad wavelength range.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Enhanced Broadband Plasmonic Absorbers with Tunable Light Management on Flexible Tapered Metasurface

Guozhi Hou,Zhaoye Wang,Zhangbo Lu,Hucheng Song,Jun Xu,Kunji Chen

DOI: https://doi.org/10.1021/acsami.0c16189

2020-12-03

Abstract:The growing attention in solar energy has motivated the development of highly efficient solar absorbers, and a metasurface absorber with broadband optical absorption is one of the main research interests. In this study, we developed an efficient metasurface absorber on a flexible film with a simple fabrication process. It consists of a polyimide nanocone substrate coated with gold and tungsten layers, exhibiting over 96% optical absorption in the visible range and a tunable absorption performance in the long wave range. From the analysis of experiment and simulation, the enhanced optical absorption is attributed to the synergistic effects of localized nanoparticle plasmon resonance and cavity plasmon resonance, and tunable light management comes from the strong infrared reflection of a gold layer and intrinsic absorption of variable tungsten layers. Meanwhile, the polarization-independent and omnidirectional optical absorption properties are demonstrated in the fabricated absorbers. Furthermore, this absorber shows the robustness against bending, maintaining the stable and excellent absorption performance after hundreds of bending tests. Our work offers a low-cost and straightforward tactic to design and fabricate flexible solar absorbers, and this metasurface absorber is a promising candidate for many exciting applications, such as emissivity control and flexible energy-related devices.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c16189?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c16189</a>.SEM characterizations of PI NC/W and PI NC/Au-W absorbers, measured transmission spectra of PI NC/Au-W absorbers, measured absorption spectra of PI NC/Au and PI NC/Au-W absorbers, simulated electric field distribution of the planar W layer and tapered W layer, and simulated electric field distribution of the PI NC/Au-W absorber with a 0 and 90° of polarization angle (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c16189/suppl_file/am0c16189_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

materials science, multidisciplinary,nanoscience & nanotechnology
Ultra-Broadband Polarization-Insensitive MXene-Based Surface Plasmon Resonance Solar Absorber for Solar Thermal Application

Khaled Aliqab,Raj Agravat,Dhruvik Agravat,Shobhit K. Patel,Meshari Alsharari,Ammar Armghan

DOI: https://doi.org/10.1007/s11468-024-02336-y

IF: 2.726

2024-05-19

Plasmonics

Abstract:Solar energy harvesting is well-known in the past time and solar energy is a superlative source of renewable energy. Researchers have many surface plasmon resonance structures examined with different materials and prevent further losses. In this paper, we proposed MXene-based 2D material with a novel shape of resonator used in solar absorbers. The MXene-based solar absorber effectively captures the sunlight and converts it into heat for its strong optical surface plasmon resonance properties, this solar absorber is used as a solar water heating application. A three-layer solar absorber with a novel shape of resonator layer used of 2D material MXene is constructed to detect a perfect absorption level. The upper layer, or resonator, uses MXene, the centre layer, or dielectric layer, uses SiO 2 , and the bottom layer, or substrate layer, uses Silver (Ag). With the proposed structure, an average absorption of 94.62% can be attained at the ultra-broadband bandwidth range of 2800 nm. Absorption values exceed more than 92% at a 600 nm and 530 nm bandwidth and over more than 96% at a 400 nm wavelength. This proposed solar absorber achieved 99.99% maximum absorption and wide-angle with polarization-insensitive structure. It would be feasible to study AM performances and variations in parameters related to substrate thickness, resonator thickness, and dielectric layer thickness. Additionally, a 10° gap between the incidence angle changes from 0 to 70°. A proposed paper additionally includes sections on magnetic and electric intensity testing and the comparison table.

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry, physical
Ultra-wideband solar absorber based on double-polygonal metamaterial structures

Pengfei Sun,Lijing Su,Sihan Nie,Xin Li,Yaxin Zhou,Yang Gao

DOI: https://doi.org/10.1016/j.photonics.2024.101234

IF: 3.064

2024-02-03

Photonics and Nanostructures - Fundamentals and Applications

Abstract:In this work, a novel solar absorber with wide angle tolerance and insensitivity to polarization is proposed. The upper layer of the absorber comprises two polygonal structures, which can achieve an absorption rate of 94.2% across a broad wavelength range of 2218 nm (584 nm - 2802 nm). The performance of the absorber is simulated and verified using the finite difference time domain (FDTD) method combined with impedance matching theory. Through examining the electromagnetic field distribution at absorption peaks, the physical mechanism is elucidated. Moreover, incorporating refractory metals and nonmetallic materials in its design enhances the stability of the absorber, making it suitable for various extreme environments. This indicates its potential applications in solar energy storage and solar thermal photovoltaic systems.

optics,physics, applied,materials science, multidisciplinary,nanoscience & nanotechnology
High efficiency Titanium oxides and nitrides ultra-broadband solar energy absorber and thermal emitter from 200 nm to 2600 nm

Ying Zheng,Pinghui Wu,Hua Yang,Zao Yi,Yao Luo,Li Liu,Qianjv Song,Miao Pan,Jianguo Zhang,Pinggen Cai

DOI: https://doi.org/10.1016/j.optlastec.2022.108002

2022-06-01

Abstract:Solar energy is a widely used clean energy source, and solar absorber with wider spectrum and higher efficiency is more ideal for various applications of solar energy. In this paper, an efficient and ultra-broadband solar absorber is proposed, which is composed of periodic nano-disk combination array on TiO2 thin film. In our work, we use FDTD solutions to simulated and calculated the field distribution, absorption spectrum and thermal radiation intensity of the structure to explore the physical mechanism of the resonator. Among them, the resonance between the polarization direction of the three-layer nano-disk and the plasmon resonance at the junction of TiN nano-disk and TiO2 have obtained the ultra-broadband high-efficiency absorption of the absorber. The absorption bandwidth (A > 90%) reaches 1869 nm (288.5 nm-2157.5 nm), the average absorption efficiency in this range is 96.56%, and the average absorption efficiency in the whole wave band (200–2600 nm) is 93.77%. In addition, the structure has extremely strong heat radiation intensity, with high emission efficiency of 92.83% at 1500 K. Furthermore, the solar absorber proposed by us is polarization independent. In Transverse Electric (TE) mode and Transverse Magnetic (TM) mode, the increase of incident angle causes slight spectral shift of absorption spectrum, and the maximum deviation of average absorption efficiency is 2.17%. Ultra-broad absorption band, high absorption efficiency, high radiation intensity and polarization independence make it competent for thermo-photovoltaics and other high-power optoelectronic, radiation energy and information collection processes.

optics,physics, applied
Broadband Solar Absorber and Thermal Emitter Based on Single-Layer Molybdenum Disulfide

Wanhai Liu,Fuyan Wu,Zao Yi,Yongjian Tang,Yougen Yi,Pinghui Wu,Qingdong Zeng

DOI: https://doi.org/10.3390/molecules29184515

IF: 4.6

2024-09-23

Molecules

Abstract:In recent years, solar energy has become popular because of its clean and renewable properties. Meanwhile, two-dimensional materials have become a new favorite in scientific research due to their unique physicochemical properties. Among them, monolayer molybdenum disulfide (MoS2), as an outstanding representative of transition metal sulfides, is a hot research topic after graphene. Therefore, we have conducted an in-depth theoretical study and design simulation using the finite-difference method in time domain (FDTD) for a solar absorber based on the two-dimensional material MoS2. In this paper, a broadband solar absorber and thermal emitter based on a single layer of molybdenum disulfide is designed. It is shown that the broadband absorption of the absorber is mainly due to the propagating plasma resonance on the metal surface of the patterned layer and the localized surface plasma resonance excited in the adjacent patterned air cavity. The research results show that the designed structure boasts an exceptional broadband performance, achieving an ultra-wide spectral range spanning 2040 nm, with an overall absorption efficiency exceeding 90%. Notably, it maintains an average absorption rate of 94.61% across its spectrum, and in a narrow bandwidth centered at 303 nm, it demonstrates a near-unity absorption rate, surpassing 99%, underscoring its remarkable absorptive capabilities. The weighted average absorption rate of the whole wavelength range (280 nm-2500 nm) at AM1.5 is above 95.03%, and even at the extreme temperature of up to 1500 K, its heat radiation efficiency is high. Furthermore, the solar absorber in question exhibits polarization insensitivity, ensuring its performance is not influenced by the orientation of incident light. These advantages can enable our absorber to be widely used in solar thermal photovoltaics and other fields and provide new ideas for broadband absorbers based on two-dimensional materials.
Ultra‐Broadband Wide‐Angle Polarization‐Independent Enhanced Absorber with Ultraviolet to Far‐Infrared Absorption Performance

Lejia Wu,Zhiwei Li,Wenjie Wang,Li Zhao,Hao Ruan

DOI: https://doi.org/10.1002/pssb.202200158

2022-06-17

Abstract:Ultra‐thin broadband metamaterial absorbers exhibit high absorptivity and broad bandwidths. Herein, we propose and simulate an ultra‐broadband wide‐angle polarization‐independent enhanced absorber with a metal‐insulator‐metal structure. The enhanced absorber exhibit ultra‐wideband characteristics from ultraviolet to far‐infrared range (0.35–10 μm), where it achieves an average absorption > 96%. It is insensitive to variations in the polarization state, exhibits a wide‐angle absorption because of a high degree of geometric symmetry, and shows a satisfactory absorption performance for a combination of different materials. Thus, the distinct structural characteristics of the device play a pivotal role in absorption. These advantages improve the flexibility of material selection in the design and manufacturing process of ultra‐broadband enhanced absorbers, thereby broadening their application potential in solar energy harvesting, infrared detectors, and thermal imaging. This article is protected by copyright. All rights reserved.

physics, condensed matter
Hybrid Plasmonic Metamaterials: Towards Enhanced Ultra Broad-band and Wide-Angle Solar Absorption for Energy Harvesting

Mahdi Rashki,Mohammad Reza Rakhshani

DOI: https://doi.org/10.1039/d4cp03925d

IF: 3.3

2024-12-06

Physical Chemistry Chemical Physics

Abstract:In this paper, we have introduced a hybrid metamaterial seven-layer solar absorber. The proposed structure has remarkable features, including ultra-broadband absorption capability, wide-angle respon- siveness, and insensitivity to polarization. The average absorption of the absorber across the spectral range of 300 to 5000 nm becomes 98:05%, and the absorption bandwidth over 90% spreads out more than 4950 nm. We have analyzed the absorptivity of the structure for various optical reasons, such as propagating surface plasmon resonance (SPR), the effects of local surface plasmon resonance (LSPR), guided-mode resonance (GMR), and magnetic resonance (MR). This solar absorber has two layers of SiO2 􀀀Fe and a layer of TiN semi-oval arrays. Despite specific geometric tolerances, its ultra-broad absorption performance is effectively maintained from visible to the Mid-Infrared (MIR). The structure exhibits insensitivity at wide polarization angles, about 65 degrees. This structure could be an excellent candidate for solar energy harvesting, thermal emitters, solar cells, and so on.

chemistry, physical,physics, atomic, molecular & chemical
Broadband and wide-angle solar absorber for the visible and near-infrared frequencies

Jun Wu,Yasong Sun,Biyuan Wu,Chunlei Sun,Xiaohu Wu

DOI: https://doi.org/10.1016/j.solener.2022.04.032

IF: 7.188

2022-05-01

Solar Energy

Abstract:A polarization-insensitive broadband and wide-angle solar absorber in the visible to near-infrared regions is proposed and studied. The proposed absorber is in the form of an iron square ring array separated from an iron reflector by a dielectric spacer and a phase change material (Ge2Sb2Te5) layer. About 98% averaged absorption in the spectral range of 380–2000 nm is realized. The electromagnetic filed intensity distribution at several selected absorption peaks is studied to provide physical understanding behind the broadband absorption effect. Besides, the high absorption performance remains stable within a large viewing angle and the designed absorber shows certain dimensional tolerance, which decreases the fabrication complexity and cost and should be attractive for practical applications. Moreover, the potential applications of the proposed scheme on the solar energy harvesting are also illustrated in the last. It is believed that the proposed absorbers should find potential applications in solar energy capturing and conversion, thermo-photovoltaic devices and thermal emitters.

energy & fuels

Broadband and Polarization-Independent Solar Absorber Based on Plasmonic Coaxial Tapered Holes

Ultrabroadband and Omnidirectional Absorbers Based on a Tandem Multilayer Structure

Enhanced Broadband Absorption in Gold by Plasmonic Tapered Coaxial Holes

Broadband selective solar absorber based on dielectric-filled anti-reflection coated film-coupled two-dimensional metallic photonic crystals

Plasmonic Nanostructures for Broadband Solar Absorption Based on Synergistic Effect of Multiple Absorption Mechanisms

Double-sided Polarization-Independent Plasmonic Absorber at Near-Infrared Region.

Broadband Tunability of Polarization-Insensitive Absorber Based on Frequency Selective Surface

Multilayer stacked ultra-wideband perfect solar absorber and thermal emitter based on SiO2-InAs-TiN nanofilm structure

Broadband solar energy absorber based on monolayer molybdenum disulfide using tungsten elliptical arrays

Quasiperiodic metamaterials empowered non-metallic broadband optical absorbers

Metasurface Broadband Solar Absorber

Ultra-broadband and wide-angle absorber based on TiN metamaterial for solar harvesting

Ultra-Broadband, Omnidirectional, High-Efficiency Metamaterial Absorber for Capturing Solar Energy

Enhanced Broadband Plasmonic Absorbers with Tunable Light Management on Flexible Tapered Metasurface

Ultra-Broadband Polarization-Insensitive MXene-Based Surface Plasmon Resonance Solar Absorber for Solar Thermal Application

Ultra-wideband solar absorber based on double-polygonal metamaterial structures

High efficiency Titanium oxides and nitrides ultra-broadband solar energy absorber and thermal emitter from 200 nm to 2600 nm

Broadband Solar Absorber and Thermal Emitter Based on Single-Layer Molybdenum Disulfide

Ultra‐Broadband Wide‐Angle Polarization‐Independent Enhanced Absorber with Ultraviolet to Far‐Infrared Absorption Performance

Hybrid Plasmonic Metamaterials: Towards Enhanced Ultra Broad-band and Wide-Angle Solar Absorption for Energy Harvesting

Broadband and wide-angle solar absorber for the visible and near-infrared frequencies