Abstract:This article presents a high-sensitivity, quantified, linear, and mediator-free resonator-based microwave biosensor for glucose sensing application. The proposed biosensor comprises an air-bridge-type asymmetrical differential inductor (L) and a center-loaded circular finger-based inter-digital capacitor (C) fabricated on Gallium Arsenide (GaAs) substrate using advanced micro-fabrication technology. The intertwined asymmetrical differential inductor is used to achieve a high inductance value with a suitable Q-factor, and the centralized inter-digital capacitor is introduced to generate an intensified electric field. The designed microwave sensor is optimized to operate at a low resonating frequency that increases the electric field penetration depth and interaction area in the glucose sample. The microwave biosensor is tested with different glucose concentrations (0.3–5 mg/ml), under different ambient temperatures (10–50 °C). The involvement of advanced micro-fabrication technology effectively miniaturized the microwave biosensor (0.006λ0 × 0.005λ0) and enhanced its filling factor. The proposed microwave biosensor demonstrates a high sensitivity of 117.5 MHz/mgmL-1 with a linear response (r2 = 0.9987), good amplitude variation of 0.49 dB/mgmL-1 with a linear response (r2 = 0.9954), and maximum reproducibility of 0.78% at 2 mg/mL. Additionally, mathematical modelling was performed to estimate the dielectric value of the frequency-dependent glucose sample. The measured and analyzed results indicate that the proposed biosensor is suitable for real-time blood glucose detection measurements.

A Glucose Biosensor Based on Piezoresistive Microcantilevers

Glucose Oxidase Multilayer Modified Microcantilevers for Glucose Measurement.

Modification of microcantilevers using layer-by-layer nanoassembly film for glucose measurement

Piezoresistive Bridge Microcantilevers Biosensor Based on Soi Wafer for Glucose Detecting

Experimental and theoretical aspects of glucose measurement using a microcantilever modified by enzyme-containing polyacrylamide.

Glucose Biosensor Based on the Microcantilever

A wireless acoustic wave sensor modified with biocompatible polymer for glucose monitoring

Simulation and Design of Piezoelectric Microcantilever Chemical Sensors

A MEMS based blood glucose measurement sensor using twin-cantilever structure

Biochemical Sensors Based on Piezoresistive Microcantilevers

A Sensor Platform Based On Piezoresistive Cantilever

An Enzyme-Metal-Insulator-Silicon Structured Sensor Using Surface Photovoltage Technology for Potentiometric Glucose Detection

Design of Piezoresistive Micro-Cantilever with Stress Concentration Regions

Detection of Abrin Using a Polymide-based Piezoresistive Microcantilever Biosensor

A Flexible PI/Si/SiO2 Piezoresistive Microcantilever for Trace-Level Detection of Aflatoxin B1

A Low Spring Constant Piezoresistive Microcantilever for Biological Reagent Detection

Ultrasensitive Detection of Aflatoxin B1 Using a Polyimide-Based Piezoresistive Microcantilever Biosensor

Glucose Biosensor Based on Covalent Immobilization of Enzyme in Sol–gel Composite Film Combined with Prussian Blue/carbon Nanotubes Hybrid

Design and Optimization of Laminated Piezoresistive Microcantilever Sensors

High-Sensitivity, Quantified, Linear and Mediator-Free Resonator-Based Microwave Biosensor for Glucose Detection