Abstract:PurposeIn engineering design, attention is usually paid to avoiding the low-order modal resonance of elastomers, but it is difficult to avoid high-order modal resonance. Although the amplitude of high-order modal resonance is generally not large, due to the higher frequency, it will also lead to vibration fatigue of the structure. To accurately analyze the higher order modes of a one-dimensional elastomer, the vibration reduction efficiency of a nonlinear energy sink (NES) cell element at higher order excitation frequencies is explored.MethodsFirst, a Timoshenko beam dynamic model of transverse nonlinear vibration of elastic body is established. The natural frequencies and the modes of the first eight orders of the elastic beam are analyzed and compared with the numerical results of ANSYS software. The correctness of modal analysis of elastic beam is verified. To suppress the resonance of the higher order modes of the elastomer, the centralized and distributed control strategies of the NES cell are introduced. The dynamic model of forced vibration of Timoshenko beam coupled with NES cell is established. The harmonic balance method (HBM) and the pseudo arc-length method are combined to solve the partial differential–integral equation of Timoshenko beam coupled with multiple NES cell nonlinear differential equations. The amplitude–frequency response curve of the system is obtained. The approximate analytical results are numerically verified by the Runge–Kutta method (RKM). The resonant steady-state response of the nonlinear vibration of Timoshenko beam without NES cell control is compared.Results and ConclusionFor both different vibration reduction strategies, the NES cell element has good vibration reduction efficiency. As the number of NES cell elements increases, the vibration reduction efficiency also increases. However, the vibration reduction efficiency does not keep increasing, but tends to a stable value. For both vibration reduction strategies, the NES cell elements have highly similar vibration reduction efficiencies at higher order resonant frequencies.

Complex Modal Characteristic of a Uniform Timoshenko Beam with Rotational Dampers

A Complex-Valued Solution of Free Vibration for Tapered Beams with Any Number of Rotational Dampers

CHARACTERISTICS OF MODAL DAMPING OF STEEL AND CFRP STAY CABLES WITH OIL DAMPERS

A Numerically Stable Dynamic Coefficient Method and Its Application in Free Vibration of Partial-Interaction Continuous Composite Beams

Modal Frequency and Stability of Rotor System Supported by Viscoelastic Elastomeric Dampers

A Numerical Method of the Euler-Bernoulli Beam with Optimal Local Kelvin-Voigt Damping

A Beam with Arbitrarily Placed Lateral Dampers: Evolution of Complex Modes with Damping

Semi-analytical analysis on free vibration of cantilever beam with particle damping based on multiscale method

Exact Solution of Free Vibration of A Uniform Tensioned Beam Combined with Both Lateral and Rotational Linear Sub-Systems

Stability for the Timoshenko Beam System with Local Kelvin–Voigt Damping

Finite Element Modeling of Nonlinear Active and Passive Dampers Applied to Vibration Controls

Dynamic Modeling and Analysis of Centrifugally Stiffened Proportionally Damped Timoshenko Beam

Uniformly exponentially stable approximations for Timoshenko beams

Dynamic modeling for rotating composite Timoshenko beam and analysis on its bending-torsion coupled vibration

Analysis of Tall Buildings with Damped Outriggers

A time-domain method for free vibration responses of an equivalent viscous damped system based on a complex damping model

Energy Expressions and Free Vibration Analysis of a Rotating Uniform Timoshenko Beam Featuring Bending—torsion Coupling

Free vibration analysis of rotating composite Timoshenko beams with bending-torsion couplings

High-Order Modal Vibration Control of Timoshenko Beams Based on Nonlinear Energy Sink Cells

Numerical Method for Computing Modal Damping of Rotor System

ANALYSIS OF MODAL PROPERTIES OF BEAMS WITH VISCO-ELASTIC SUPPORT JOINTS