Abstract:Plastic instead of steel technology is one of the important means of automotive lightweighting, which can greatly reduce the weight of the car while ensuring the same performance of the product. For the lightweighting of the automotive all-plastic front-end frame structure, the initial structural design of the front-end frame was carried out by HyperMesh; based on the compromise planning method and entropy weight method, the compromise planning method with weight coefficients was used to unify the planning of each subobjective to obtain the integrated response function, and the minimization of the integrated response function was the objective. The main considerations were the lock limit crash load, the cushion area load, and the pedestrian protection impact load under typical operating conditions, the shape optimization, and topology optimization, respectively. The mass of the sheet metal front-end frame was reduced from the original 10.5 kg to 6.8 kg—a weight reduction of 35.24%. The front-end frame was extracted and the mid-plane was repaired by HyperMesh, the complete mid-plane was meshed, loads and properties were added to the mesh, the front-end frame was subjected to static and modal analysis in the OptiStruct module, and the stiffness and intrinsic frequency were verified. The results show that the smallest first-order mode in the modal analysis is 57.38 Hz, which is much larger than the 30 Hz required before design. The fatigue analysis of the front-end frame was then performed using N-code to derive the damage results; it is concluded that its life is 6122 s, much larger than the specified 1200 s. Through the verification of the relevant resonance test, it is judged that the performance of the test part meets the actual requirements comprehensively by checking the status after the test.

Structural optimization design of the electric motorcycle frame

Multi-Structural Optimization of Bearingless Permanent Magnet Slice Motor Based on Virtual Prototype in Ansoft Maxwell

Optimazation Method for a Mini Electric Vehicle Frame Structure

Optimized Lightweight Frame for Intelligent New-energy Vehicles

A Lightweight Body Frame Conceptual Design of a Mini Electric Vehicle

Multi-objective Optimization on the Body Structure of Integral Bus

Finite Element Analysis and Optimization for Static and Dynamic Characteristics of Diesel Forklift Frame

Structural analysis and optimization of bicycle frame designs

DYNAMIC ANALYSIS AND OPTIMIZATION DESIGN OF PLATFORM FRAME CONSTRUCTION

Dynamic Analysis and Optimization of a Solar Car Using FE Method

Structure Optimization Design of Robot Arm Based on Flexible Multi-body Dynamics

Optimization Design of Tension Machine Frame Based on Solidworks and ANSYS Workbench

Optimization and Structural Analysis of Automotive Battery Packs Using ANSYS

Topology optimization-based lightweight design of a certain tubular beam subframe

Multi-condition combined topology optimization design of electric truck aluminum alloy frame based on subjective and objective interactive weights

Optimization design and analysis of mobile pump truck frame using response surface methodology

Multi-disciplinary design optimisation considered fluid-structure interaction and life prediction applied in the lightweight carbody structure

Research on the Optimization of Automobile Plastic Front Frame Structure

Structural design optimization of a high-speed rotor system for mechanical vibration mitigation

Billion-design-variable-scale topology optimization of vehicle frame structure in multiple-load case

Multi-objective Optimization on Bus Structure based on Optimized Stress