Abstract:Bearing vibration characteristic analysis based on dynamic analytical model is of importance for identifying faults of bearing in mechanical systems. However, on one hand, the relationship between the raceway-ball contact pairs in bearing dynamic models are often considered as a simplified cascade; on the other hand, the evolving law of bearing fault characteristics of the early fault (wear) and severe fault (pitting) has not been fully revealed, which confines the development of bearing fault feature extraction and severity assessment methods. This paper, therefore, constructs a dynamic analytical model considering time-varying contact pairs and parameterized defects of deep groove ball bearings (DGBB) to illustrate the dynamic vibration characteristics of DGBB under different health conditions. The degrees of freedom of balls and flexible cage, multi-parameter defect excitation, mixed-elastohydrodynamic lubrication (mix-EHL), and relative slippage are all considered in the proposed model. Positions of multiple rigid bodies and contact points are dynamically expressed by coordinate systems, from which system physical parameters and geometrical relationship can be obtained. The bearing early and severe fault excitations are described by multi-parameters. The early fault which is embodied as surface roughness yields the indirect displacement excitation and the severe fault yields the direct displacement excitation. The surface roughness and indirect displacement excitation affect the mix-EHL, the radial force and friction force of contact pairs, thereby affecting the vibration response of DGBB. The evolving mechanism analysis of bearing fault characteristics are then revealed based on the established dynamic model, indicating the coupling and nonlinear relationship between the characteristic frequency amplitude and the fault severity of DGBB.

Quantitative Damage Diagnosis for Rolling Bearing Based on Contact Vibration Model and Optimum Kurtosis-Laplace Wavelet

Rolling Bearing Fault Diagnosis Based on Morphological Wavelet Theory and Bi-Spectrum Analysis

Fault Diagnosis of Rolling Bearing Based on Wavelet Packet and Fourier Analysis

Rolling element bearings fault diagnosis based on physical model identification

Approach to the Quantitative Diagnosis of Rolling Bearings Based on Optimized VMD and Lempel-Ziv Complexity under Varying Conditions

Quantitative extraction of rolling bearings' inner race fault level based on Volterra theory

Model for dynamic characteristics produced by inner race local defect in ball bearing system and its simulation

Assessment Method of Early Damage Severity for Rolling Bearing Based on the Improved HVD and Lempel-Ziv Index

Nonlinear dynamic modeling and vibration analysis for early fault evolution of rolling bearings

Quantitative and Localization Fault Diagnosis Method of Rolling Bearing Based on Quantitative Mapping Model

A Quantitative Diagnosis Method for Rolling Element Bearing Using Signal Complexity and Morphology Filtering

Integrated Model to Predict Vibration Response of Rolling Bearings with Localized Defects and GRD Assessment

Dynamic modeling and simulation of rolling ball bearings with localized surface defects

Modeling and Fault Size Estimation for Non-Penetrating Damage in the Outer Raceway of Tapered Roller Bearing

Dynamic modeling considering time-varying contact pairs and parameterized defects of deep groove ball bearings for its vibration characteristic analysis

Wavelet Transform-Based Higher-Order Statistics for Fault Diagnosis in Rolling Element Bearings

Impact of Wavelet Basis on Vibration Analysis for Rolling Bearing Defect Diagnosis

Vibration Modeling of Rolling Bearings Considering Compound Multi-Defect and Appraisal with Lempel-Ziv Complexity

Dual-impulse Behavior Analysis and Quantitative Diagnosis of the Raceway Fault of Rolling Bearing

Dynamic Linear Models-Based Time Series Decomposition and Its Application on Bearing Fault Diagnosis

Fault Diagnosis of Rolling Bearing Based on Wavelet Packet Combined Autoregressive Power Spectrum Theory