Abstract:We report the design, optimization, and performance analysis of three axial junction nanowire solar cells (NW SCs) based on cadmium telluride (CdTe), copper indium gallium selenide (CIGS), and copper zinc tin sulfide (CZTS) with significant improvement in their optical and electrical characteristics compared to their planar counterparts. It is shown that the performance of these NW SCs can be further improved by incorporating a hemispherical indium doped tin oxide (ITO) forward scatterer on top of the ITO front contact of the solar cells. We also compare forward scatterer incorporated NW SCs with forward scatterer incorporated planar solar cells (PSCs) and observe that forward scatterers significantly enhance the absorption in both cases. We further study the optimum size and arrangement of ITO hemispheres that result in improved photocurrent. In optimum cases, the incorporation of forward scatterers leads to absorption enhancement of 7.8%, 5.36%, and 8.8% in PSCs, and 21.4%, 7.36%, and 6.02% in NW SCs, respectively, for CdTe, CIGS, and CZTS absorbers in the same order. From the absorption profile at various wavelengths, it is found that forward scatterers enhance absorption in the 450-600 nm wavelength range, while nanowires improve absorption in the 600-800 nm range, and their combination results in an improved absorption profile for the entire visible wavelength range. We also observe increased electron-hole-pair (EHP) generation rate due to increased field-scattering and light concentration at the center of the nanowire below forward scattering hemispheres, leading to 46%, 32%, and 82.5% improvement in power conversion efficiency (PCE) for the three absorber layers, respectively. The effects of Al2O3 and SiO2 passivation layers surrounding the nanowires of the optimized cells are observed, and we conclude that the CIGS absorber benefits the most when the SiO2 passivation layer is used, increasing its PCE from 29.72% to 32.43%, while the PCEs of CdTe and CZTS are unaffected by the passivation layer due to competing effects of reduced absorption and reduced surface recombination.

Nanowire Tandem Solar Cells

Hybrid heterojunction and photoelectrochemistry solar cell based on silicon nanowires and double-walled carbon nanotubes.

Technological guidelines for the design of tandem III-V nanowire on Si solar cells from opto-electrical simulations

Optical Analysis of Perovskite III-V Nanowires Interpenetrated Tandem Solar Cells

Periodic Nanopillar N-I-P Amorphous Si Photovoltaic Cells Using Carbon Nanotube Scaffolds

Current Matching and Efficiency Optimization in a Two-Junction Nanowire-on-silicon Solar Cell

Carbon Nanotube Arrays for Optical Design of Amorphous Silicon Solar Cells

Silicon-nanocrystal-incorporated Ternary Hybrid Solar Cells

Silicon Nanocrystal Conjugated Polymer Hybrid Solar Cells with Improved Performance

Anti-reflection Properties of Spherical Top Nanowire Arrays for Solar Cell Applications

Arrays of Parallel Connected Coaxial Multiwall-Carbon- NanotubeâAmorphous-Silicon Solar Cells

Nanophotonic Light Management for Perovskite-Silicon Tandem Solar Cells

New Approaches To Improve The Performance Of Thin-Film Radial Junction Solar Cells Built Over Silicon Nanowire Arrays

Design optimization and efficiency enhancement of axial junction nanowire solar cells utilizing a forward scattering mechanism

Vertically aligned ZnCdS nanowire arrays/P3HT heterojunctions for solar cell applications

Nitride/Perovskite Tandem Solar Cell with High Stability: Analytical Study of Adjusting Current Matching Condition

Tandem Photovoltaics from 2D Transition Metal Dichalcogenides on Silicon

Optical and Electrical Analyses of Solar Cells with a Radial PN Junction and Incorporating an Innovative NW Design That Mimics ARC Layers

Nano-optical designs for high-efficiency monolithic perovskite–silicon tandem solar cells

Design and analysis of Sb2S3/Si thin film tandem solar cell

Design and performance investigation of CIGS/SWCNT tandem solar cell for efficiency improvement