Abstract:Although blood flows are mostly laminar, transition to turbulence and flow separations are observed at curved vessels, bifurcations, or constrictions. It is known that wall-shear stress plays an important role in the development of atherosclerosis as well as in arteriovenous grafts. In order to help understand the behavior of flow separation and transition to turbulence in post-stenotic blood flows, an experimental study of transitional pulsatile flow with stenosis was carried out using time-resolved particle image velocimetry and a microelectromechanical systems wall-shear stress sensor at the mean Reynolds number of 1750 with the Womersley number of 6.15. At the start of the pulsatile cycle, a strong shear layer develops from the tip of the stenosis, increasing the flow separation region. The flow at the throat of the stenosis is always laminar due to acceleration, which quickly becomes turbulent through a shear-layer instability under a strong adverse pressure gradient. At the same time, a recirculation region appears over the wall opposite to the stenosis, moving downstream in sync with the movement of the reattachment point. These flow behaviors observed in a two-dimensional channel flow are very similar to the results obtained previously in a pipe flow. We also found that the behavior in a pulsating channel flow during the acceleration phase of both 25% and 50% stenosis cases is similar to that of the steady flow, including the location and size of post-stenotic flow separation regions. This is because the peak Reynolds number of the pulsatile flow is similar to that of the steady flow that is investigated. The transition to turbulence is more dominant for the 50% stenosis as compared to the 25% stenosis, as the wavelet spectra show a greater broadening of turbulence energy. With an increase in stenosis to 75%, the accelerating flow is directed toward the opposite wall, creating a wall jet. The shear layer from the stenosis bifurcates as a result of this, one moving with the flow separation region toward the upper wall and the other with the wall jet toward the bottom wall. Low wall-shear stress fluctuations are found at two post-stenotic locations in the channel flow – one immediately downstream of the stenosis over the top wall (stenosis side) inside the flow separation region, and the other in the recirculation region on the bottom wall (opposite side of the stenosis).

Numerical simulation and experimental test of hemodynamics in vessel-stent coupling systems

Computational biomechanics and experimental verification of vascular stent

Experimental Study on Hemodynamics of an End-to-side Anastomosis

Experimental Study on Anastomotic Hemodynamics Using Tomographic Particle Image Velocimetry

Numerical simulation of hemodynamics in a bioresorbable vascular scaffold

A numerical study on the wall shear stress of stented artery model

Model Experiment and Numerical Simulation of Marginal Pressure in the Flow Field Downstream of the Stenostic Vessel in Vitro

Numerical Simulation of the Stent Expansion Process based on the Hemodynamic Characteristics of Bidirectional Fluid-structure Coupling

[Hemodynamics Analysis of Intravascular Stents with Different Design Features].

Numerical Simulation on the Effects of Drug Eluting Stents at Different Reynolds Numbers on Hemodynamic and Drug Concentration Distribution

Numerical Study On The Hemodynamic Performance Of A Streamlined Endovascular Stent

Effects of the Inlet Conditions and Blood Models on Accurate Prediction of Hemodynamics in the Stented Coronary Arteries

A New Way to Reduce Flow Disturbance in Endovascular Stents: a Numerical Study.

Computational replication of the patient-specific stenting procedure for coronary artery bifurcations: From OCT and CT imaging to structural and hemodynamics analyses

Transitional Pulsatile Flows with Stenosis in a Two-Dimensional Channel

Development of Elastic Artificial Vessels with a Digital Pulse Flow System to Investigate the Risk of Restenosis and Vasospasm

Effects of different positions of intravascular stent implantation in stenosed vessels on in-stent restenosis: An experimental and numerical simulation study

A study on the wall shear stress of stented artery model by using electrochemical technique

In silico model of stent performance in multi-layered artery using 2-way fluid-structure interaction: influence of boundary conditions and vessel length

Numerical Investigation of Effects of Drug-eluting Stent Link on Flow Field and Concentration Field of Hemoynamics

[Finite Element Method and Computational Fluid Dynamics Used in the Analysis of a Stent].