Abstract:Analog and digital integrated circuit performance has greatly benefited by the shrinking of semiconductor fabrication technology components. In order to reduce the size of the transistors, it is obvious that the speed of the circuits must increase and the supply voltage must decrease. Although this decreases the power consumption of the circuits, it typically reduces the characteristics of analog circuits, such as dynamic range and output resistance. The gift In this study, a novel wide bandwidth current mirror with low power consumption, low voltage, and super high voltage swing are given. The proposed design calls for a current mirror bandwidth of 168 MHz. Additionally, the output impedance for the proposed circuit, which is exceptionally high and is close to 175 MΩ according to the simulation results, guarantees the high accuracy of the suggested current mirror current. The suggested circuit design's low power consumption of 42.4 μW, lowest output voltage of 100 mV, and maximum swing limit of 850 mV all demonstrate that they are ideally suited for low power/operational voltage applications and ultra-low voltage circuit design. And resists less-than-ideal PVT circumstances. The capability of this technique to achieve high-speed current mirror and high-current driving capabilities with few accuracy or power performance restrictions is demonstrated in this work. It is implemented in 0.18 m AMS CMOS technology with a 1 V supply voltage and offers a high output current with a relative current copy error of 2% and a maximum settling time of 2–4 ns, making it well suited for the implementation of quick and balanced multipole current sources.

A High Linearity Current Mode Multiplier/divider with a Wide Dynamic Range

New Technique: A Low Drift Current Reference Based on PMOS Temperature Correction Technology.

A Capacitively Coupled Digital Isolator Using Multiple-Pulse-coding Architecture with CMTI of 200kv/μs and Static Current of 60Μa.

A Capacitively Coupled Digital Isolator Using Multiple-pulse-coding Architecture with CMTI of 200 Kv/μs and Static Current of 60 Μa

An Inductorless 5-GHz Differential Dual Regulated Cross-Cascode Transimpedance Amplifier using 40 nm CMOS

A High Accuracy and Wide Input Voltage Range Current Sense Amplifier for Bidirectional High-Side and Low-Side Current-Sensing

A 1 Mw Power-Efficient High Frequency CML 2:1 Divider

A Low-voltage CMOS Four-quadrant Analog Multiplier

A Broadband and High Speed CML Divider with Inductor Peaking in 40-Nm SMIC

A High-Speed and Low-Power Multi-Modulus Divider

Design and Implementation of a Wide-Swing CMOS Multiplier for AC Source Signal Tracking and Modulation

A New Wide Linear Range Differential Voltage Current Conveyor and Its Application

Design of a low-power low-phase-noise multi-mode divider with 25%-duty-cycle outputs in 0.13µm CMOS

Design of a low-power low-phase-noise multi-mode divider with 25%-duty-cycle outputs in 0.13μm CMOS

Design of High-Side Current Sense Amplifier with Ultra-Wide ICMR

High performance BiCMOS differential reference voltage generator

The Design of a New Multiple Output Voltage Control CDTA

Behavioral Analysis and Optimization of Cmos Cml Dividers for Millimeter-Wave Applications

Analysis and Design of High Linearity Current Reference for Current Mode Circuits

A Power-Efficient High-Drive Current Mirror Combining a Regulated Cascode Topology with a Non-Linear CCII-Based Feedback

Design and simulation of a new current mirror circuit with low power consumption and high performance and output impedance