Abstract:Carbon membranes, a novel porous inorganic membrane, have considerable potential applications in many industrial fields owing to their better stability in aggressive and adverse environments. However, the high cost of precursor materials has hampered their wide applications on commercial scale. In this study, coal, a cheap material, is used to prepare the tubular microfiltration carbon membranes. The effects of carbonization conditions on the properties of coal-based carbon membrane were investigated by the variation of the weight loss, shrinkage ratio of tube size and pore structure characteristics during carbonization. The results show that carbonization conditions greatly affect the properties of coal-based carbon membranes. The carbon membranes carbonized in the inert gases have more “open” porous structure and high gas flux compared to those carbonized in vacuum which makes the carbon membrane possess smaller pores and low gas flux. The carbonization temperature plays an important role in the determination of the pore structure and densification of carbon matrix. At the temperature below 600°C, the pore structure and carbon matrix of carbon membrane are formed with more than 95% of the total weight loss and only 48% of the total size shrinkage ratio. The matrix of carbon membrane gets more compact with the temperature increasing from 600°C to 900°C, in which the size shrinkage ratio is up to 52% with only 5% of the total weight loss. The low heating rate should favor the preparation of the carbon membranes with small average pore size and narrow pore size distribution, and the high gas flow rate can produce the carbon membranes with large average pore size and high porosity.

Preparation of mesoporous carbon membranes for ultrafiltration with properties of environmental materials

Preparation of Free-Standing High Quality Mesoporous Carbon Membranes

Molecular‐Sieving Membrane by Partitioning the Channels in Ultrafiltration Membrane by in Situ Polymerization

Ultrafiltration Carbon Membranes from Organic Sol-Gel Process

Effects Of Processing Parameters On The Pore Structure Of Mesoporous Carbon Membranes

Preparation of a Mesoporous Carbon Membrane from Resorcinol and Formaldehyde

A High-Permeance Supported Carbon Molecular Sieve Membrane Fabricated by Plasma-Enhanced Chemical Vapor Deposition Followed by Carbonization for Co2 Capture

Preparation and Properties of Functionalized Carbon Nanotube/psf Blend Ultrafiltration Membranes

A High CO2 Permselective Mesoporous Silica/carbon Composite Membrane for CO2 Separation

Physical Design, Preparation and Functionalization of Carbon Membranes for Gas Separation: Physical Design, Preparation and Functionalization of Carbon Membranes for Gas Separation

Carbon Molecular Sieve Membranes with Ultra‐Thin Selective Skin Layer by Pyrolysis of Porous Hollow Fibers

Physical Design, Preparation and Functionalization of Carbon Membranes for Gas Separation

Preparation and Characterization of Carbon Membranes Made from Poly(phthalazinone Ether Sulfone Ketone)

Preparation and characterization of PFNR-based carbon membrane for microfiltration

Preparation and Characterization of Carbon Membranes Derived from Poly(phthalazinone Ether Sulfone) for Gas Separation

Carbon Molecular Sieve Membrane Preparation by Economical Coating and Pyrolysis of Porous Polymer Hollow Fibers

Effects of Carbonization Conditions on the Properties of Coal-Based Microfiltration Carbon Membranes

Polymide/Fe<SUB>3</SUB>O<SUB>4</SUB>-carbonized Membranes for Gas Separation: Polymide/Fe<SUB>3</SUB>O<SUB>4</SUB>-carbonized Membranes for Gas Separation

Synthesis of porous, nitrogen-doped adsorption/diffusion carbonaceous membranes for efficient CO2 separation.

Fine Ultra-Micropore Control Using the Intrinsic Viscosity of Precursors for High Performance Carbon Molecular Sieve Membranes

Synthesis of Porous, Nitrogen-Doped Adsorption/Diffusion Carbonaceous Membranes for Efficient CO2Separation