Abstract:Intravascular ultrasound (IVUS) imaging is a minimally invasive medical technology that plays a critical role in diagnosis, treatment guidance, and post-treatment assessment of coronary artery diseases. As a crucial component of the IVUS system, conventional IVUS transducers are designed to be planar and unfocused to adequately cover the region of interest. However, this design comes at the cost of spatial resolution. Here, we developed a high-performance focused IVUS transducer using Pb(In1/2Nb1/2)O3-Pb(Sc1/2Nb1/2)O3-PbTiO3 (PIN-PSN-PT) textured ceramics with both high electromechanical performance (thickness-mode electromechanical coupling factor kt: ∼60%) and high Curie temperature (TC: ∼250 °C). Benefiting from the relatively low clamped dielectric constant (ε33S/ε0: ∼450) of PIN-PSN-PT-textured ceramics in contrast to currently used soft piezoelectric ceramics (>1000), we designed a relatively large aperture for the focused IVUS transducer, with a goal of enhancing lateral resolution across a larger depth of field, ranging from 1 to 5 mm. The developed focused IVUS transducer operates at 42 MHz with an −6 dB bandwidth of 72%, featuring a 0.6 × 0.6 mm2 aperture while maintaining an electrical impedance of approximately 40–60 Ω. The axial and lateral resolutions characterized by wire phantom imaging are 45 and 208 μm, respectively. The acoustic pressure generated by the focused IVUS transducer is 1.4 times higher than that of its planar counterpart. Ex vivo porcine coronary artery imaging demonstrates that our focused IVUS transducer offers improved image quality and uniformity for the visualization of intravascular structures. Our work shows great potential of PIN-PSN-PT-textured ceramics for creating high-frequency miniaturized focused transducers.

Broadband Focusing Ultrasonic Transducers Based on Dimpled LiNbO3 Plate with Inversion Layer

Broadband Ultrasonic Focusing in Water with an Ultra-Compact Metasurface Lens

Broadband Characterization of Near-Field Focusing with Groove-Structured Lens

High Frequency PMN–PT Single Crystal Focusing Transducer Fabricated by a Mechanical Dimpling Technique

Bandwidth Improvement Of Linbo3 Ultrasonic Transducers By Half-Concaved Inversion Layer Approach

Design and Simulation of a High Resolution Ultrasonic Micro-Transducer Derived by LiNbO<inf>3</inf>

Lfe Ultrasonic Transducers Based On Inversion Layer Linbo3 For Medical Imaging

Research and Fabrication of High-Frequency Broadband and Omnidirectional Transmitting Transducer

Design and modeling of inversion layer ultrasonic transducers using LiNbO3 single crystal

Textured-piezoelectric-ceramic-based Focused Intravascular Ultrasonic Transducer with Improved Image Quality and Uniformity

Investigation of an Active Focusing Planar Piezoelectric Ultrasonic Transducer

Ultrahigh Frequency (100 MHz–300 MHz) Ultrasonic Transducers for Optical Resolution Medical Imagining

Devolopment of focused IVUS transducer using PMN-PT single crystal

Design of efficient, broadband single-element (20-80 MHz) ultrasonic transducers for medical imaging applications

Numerical and Experimental Analysis of Focused Air-Coupled Ultrasonic Transducer Based on Cross-Linked Polypropylene Film

3-D Underwater Acoustic Wave Focusing by Periodic Structure

PMN-PT Single Crystal Ultrasonic Transducer with Half-Concave Geometric Design for IVUS Imaging

High-frequency PIN–PMN–PT Single Crystal Ultrasonic Transducer for Imaging Applications

Planar ultrasonic transducer based on a metasurface piezoelectric ring array for subwavelength acoustic focusing in water

Design and Application of Ultrasound Focused Transducer for the Ultrasonic Feature Imaging Testing System

Lithium Niobate-Based Optically Transparent Transducer for Broadband Ultrasound Transceiving